[chirp_users] Cannot program Simplex from Imported CSV

Brett Davidson ctsp22 at gmail.com
Tue Apr 1 21:54:09 PDT 2014


How do I change the PORT from bluetooth to USB?
On Apr 1, 2014, at 6:46 PM, John Kellas <sales at mparam.com> wrote:

> Thanks Jeff,
> 
> I'll upload all those that I imported from CSV into the 5888 as they all say 'none', and then see how it goes, it sounds like I will have simplex which is great, this is for a SAR Group, 12 radios, and there's going to be about 150 channels in there, which I'd prefer not to have to edit by hand.
> 
> Thanks again to everyone that has helped with this.
> 
> 
> Regards,
> John Kellas
> 403-762-2333
> 
> 
> On Mon, Mar 31, 2014 at 7:44 PM, Jeff <wireless3.14159 at gmail.com> wrote:
> No problemo, John. If I get a chance to play with it, I'll see if things still behave the same; it's possible I was using an older daily build at the time. 
> 
> A bit of a problem sorting by xmit frequency for sure. Maybe sorting by receive frequency would be good enough for keeping track of antennas? Otherwise some sort of back and forth import/export/sorting action in Excel, though that doesn't seem like much fun.
> 
> But yes, the simplex channels I have are all "none" for the duplex field. 
> 
> From: John Kellas <sales at mparam.com>
> Sent: Mon Mar 31 17:59:01 MDT 2014
> 
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Subject: Re: [chirp_users] Cannot program Simplex from Imported CSV
> 
> Thanks for that Jeff. That is helpful, as I had forgotten about that edit mode being a possibility.
> 
> You mention you had the problem with a Wouxun. I noticed the problem when I first programmed a Wouxun KG-816. I had assumed that when the offset was blank it would Tx on the same frequency, then later discovered I was wrong.
> 
> My channels are grouped, they are arranged by Tx frequency so that I can color code the appropriate antennas. So my only dilemma would be if I sort on Duplex, getting them back into ascending order based on the Tx frequency seems like it would be problematic because I don't have a Tx frequency to sort on, just the offset. But if I see Duplex = (None), then in fact I do have simplex after all?
> 
> 
> Regards,
> John Kellas
> 403-762-2333
> 
> 
> On Mon, Mar 31, 2014 at 2:57 PM, Jeff <wireless3.14159 at gmail.com> wrote:
> It's been a while, but I remember having similar problems after importing channels from a Wouxun 2D.
> 
> IIRC, freqs that I didn't want to transmit on (e.g. public service) suddenly had xmit frequencies on the 5R. I don't remember what the process did to simplex, but in any case I just sorted the CHIRP columns by "duplex," bulk-selected the ones that weren't right, then right-clicked into editing mode to change them all at once.
> 
> Duplex = "none" is simplex, and "off" for xmit inhibit.
> 
> Hope this helps.
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> 
> 
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> 
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140401/acfdc1c6/attachment-0002.html 


More information about the chirp_users mailing list