[chirp_users] UV-5r Serial Protocol & Commands

[Jens J.]

With that said, if you are interested in learning more about the inner workings, Lior Elazary has made the most progress that I'm aware of:
http://www.elazary.com/index.php?view=category&id=14%3Abaofeng-uv5r&option=com_content&Itemid=17


(It's beyond scope of chirp list ;)

-Jens


________________________________
 From: Jim Unroe <rock.unroe at gmail.com>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
Sent: Saturday, April 19, 2014 8:35 PM
Subject: Re: [chirp_users] UV-5r Serial Protocol & Commands
 


On Sat, Apr 19, 2014 at 9:02 PM, Tom Sayles <tsayles at soot-n-smoke.com> wrote:

Can anyone point me to public (or share their personal) documentation on
>the serial protocol and commands supported by the Baofeng UV-5r?
>
>I'm interested in seeing if real time (or near real time) software
>control of a UV-5r is practical.  Basically, I'd like to setup a
>Raspberry Pi, some additional hardware [custom shield] and an Ethernet
>connection [w/ PoE?] that could plug-n-play with a UV-5r that to provide
>a remote [tower top?] back end to a soft [chirp based?] front end on my
>Linux desktop or android smart phone.
>
> -- Tom Sayles
>     KE4HET
>    Fall City, Wa, USA
>

You can't remote control the UV-5R from the serial port. You can only clone (download and upload) the memory channels and settings.


Jim KC9HI


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140419/a981c30a/attachment.html