[chirp_users] Download & execute

Ted Wrobel twrobel at tacticaltech.com
Sun Oct 6 08:52:13 PDT 2013

A small addition to these comments. A cable and radio are not needed if you
can get a CHIRP file for that radio model. 
You can then open that file and make any changes desired.
I'm sure someone can send you a sample CHIRP file for your radio, just ask.


From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of John
Sent: Sunday, October 06, 2013 11:27 AM
To: 'Discussion of CHIRP'
Subject: Re: [chirp_users] Download & execute

To start, go Download the Latest Daily Build to your PC.



CHIRP is designed to work with a great number of PCs.

For CHIRP to recognize what radio you have you need to Download Image from
Radio to CHIRP to set up the initial image.

Now you can start entering data for your radio.

When finished, then you can upload the new template image to your radio. 

Obviously you can't do this part until your cable arrives.


While you are waiting for your cable to arrive, read the Drivers page
thoroughly at Miklor.com 

The biggest problem most people run into is not running the proper drivers
when using a generic programming cable.

If the wrong driver is installed, it will not work. For XP you need Prolific



Hope this helps.

John K3NXU




From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Greg
Sent: Sunday, October 06, 2013 2:59 AM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] Download & execute


I need help getting chirp to down load, extract in to XP. Have down load to
XP desk top , c & my documents, Can't find an execute file to get chip to
load up. Have z7 zip on desk top to. Can some on give me a step by step. I
don't have a cable or radio yet. Wanted to pick and load my repeats so I'm
ready when the hardware arrives. Thanks KB0VOY


No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3222/6227 - Release Date: 10/06/13

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20131006/ccbfd1a6/attachment-0002.html 

More information about the chirp_users mailing list