[chirp_users] Offset UV-5R

[Brad NK8J]

The offset won't be in use unless you set the Duplex + or -. 

 

Brad NK8J

 

From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Milton
Hywatt
Sent: Tuesday, October 29, 2013 5:30 AM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] Offset UV-5R

 

Why do I need a frequency in the offset cell even for a

simplex channel? I was redoing my channel list yesterday 

and noticed the radio would not transmit on a channel that

was for simplex crossband use into my base radio. I had removed

the frequency figuring that if it is simplex it doesn't need an offset

entered since it is the same as the RX/TX entries. Well that's not 

the case. It's no biggie. But I would like to understand the logic

of needed the simplex frequency entered into the offset cell. Or

maybe I'm doing something else wrong? 



____________________________________________________________
 
<http://thirdpartyoffers.juno.com/TGLI3156/?u=http://newsletter.adsonar.com/
nwrss/imgs/nwr_1560786_36140222_379054_2070767_4_2.PNG?placementId=1560786&p
lid=379054&pid=2070767&ps=36140222&rotation=4&type=2&zw=500&zh=70&v=5&url=NA
&uid=> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20131029/b302dd92/attachment.html