[chirp_users] UV-B5 Settings issue

Wed Oct 23 17:31:33 PDT 2013

Good catch. However, I haven't done anything with the FM radio yet.  Took
it out of the box and this is what I have.
I have tried it after a factory reset as well.

Poking around on the radio itself, I don't see that I have any FM radio
presets at all.

Doug

Sent from my phone. I apologize in advance for the brevity or any
misspellings
On Oct 23, 2013 7:14 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:

> It looks like you have an FM radio preset out of range (108.1). Delete it
> or change it to a valid frequency.
>
> Jim KC9HI
> On Oct 23, 2013 6:58 PM, "Doug" <sailsfast at gmail.com> wrote:
>
>> Ok...
>> I got the second part.
>>
>> Tried both CHIRP daily-20131022 and when that didnt work downgraded to a
>> build from the 11th.  Back on the 22nd build again.
>>
>> Win 7
>>
>> I have both 888 and this new b5, the setting tab for my 888 is as
>> expected.  For the B5 entirely blank.  I would send a screen shot if I
>> thought I would go through the listserver.
>>
>> I copied and pasted the frequencies from my 888 to the new b6, and wrote
>> to the b5 and 4 888 in this session.
>>
>> CHIRP daily-20131022 on WinVista/7 (Python 2.7.2)
>> Registered Alinco_DR03T = DR03Radio
>> Registered Alinco_DR06T = DR06Radio
>> Registered Alinco_DR135T = DR135Radio
>> Registered Alinco_DR235T = DR235Radio
>> Registered Alinco_DR435T = DR435Radio
>> Registered Alinco_DJ596 = DJ596Radio
>> Registered Jetstream_JT220M = JT220MRadio
>> Registered Alinco_DJ175 = DJ175Radio
>> Registered AnyTone_5888UV = AnyTone5888UVRadio
>> Registered Intek_HR-2040 = IntekHR2040Radio
>> Registered Baofeng_UV-3R = UV3RRadio
>> Registered Kenwood_TH-D7 = THD7Radio
>> Registered Kenwood_TH-D7G = THD7GRadio
>> Registered Kenwood_TM-D700 = TMD700Radio
>> Registered Kenwood_TM-V7 = TMV7Radio
>> Registered Kenwood_TM-G707 = TMG707Radio
>> Registered Kenwood_TH-G71 = THG71Radio
>> Registered Kenwood_TH-F6 = THF6ARadio
>> Registered Kenwood_TH-F7 = THF7ERadio
>> Registered Kenwood_TM-D710 = TMD710Radio
>> Registered Kenwood_TH-D72_live_mode = THD72Radio
>> Registered Kenwood_TM-V71 = TMV71Radio
>> Registered Kenwood_TH-K2 = THK2Radio
>> Registered Kenwood_TM-271 = TM271Radio
>> Registered Kenwood_TM-471 = TM471Radio
>> Registered Icom_7200 = Icom7200Radio
>> Registered Icom_7000 = Icom7000Radio
>> Registered Icom_746 = Icom746Radio
>> Registered Yaesu_FT-1802M = FT1802Radio
>> Registered Yaesu_FT-2800M = FT2800Radio
>> Registered Yaesu_FT-60 = FT60Radio
>> Registered Yaesu_FT-7800 = FT7800Radio
>> Registered Yaesu_FT-8800 = FT8800Radio
>> Registered Yaesu_FT-8900 = FT8900Radio
>> Registered Yaesu_FT-817 = FT817Radio
>> Registered Yaesu_FT-817ND = FT817NDRadio
>> Registered Yaesu_FT-817ND_US = FT817NDUSRadio
>> Registered Yaesu_FT-857_897 = FT857Radio
>> Registered Yaesu_FT-857_897_US = FT857USRadio
>> Registered Yaesu_FT-90 = FT90Radio
>> Registered Yaesu_FTM-350 = FTM350Radio
>> Registered Generic_CSV = CSVRadio
>> Registered RT_Systems_CSV = RTCSVRadio
>> Registered ARRL_Travel_Plus = TpeRadio
>> Registered Generic_XML = XMLRadio
>> Registered Baofeng_BF-888 = H777Radio
>> Registered Icom_IC-208H = IC208Radio
>> Registered Icom_IC-2100H = IC2100Radio
>> Registered Icom_IC-2200H = IC2200Radio
>> Registered Icom_IC-2720H = IC2720Radio
>> Registered Icom_IC-2820H = IC2820Radio
>> Registered Icom_IC-91_92AD = IC9xRadio
>> Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio
>> Registered Icom_IC-Q7A = ICQ7Radio
>> Registered Icom_IC-T70 = ICT70Radio
>> Registered Icom_IC-T7H = ICT7HRadio
>> Registered Icom_IC-T8A = ICT8ARadio
>> Registered Icom_IC-W32A = ICW32ARadio
>> Registered Icom_IC-V82_U82 = ICx8xRadio
>> Registered Icom_ID-31A = ID31Radio
>> Registered Icom_ID-51A = ID51Radio
>> Registered Icom_ID-800H_v2 = ID800v2Radio
>> Registered Icom_ID-880H = ID880Radio
>> Registered Icom_ID-80H = ID80Radio
>> Registered Kenwood_HMK = HMKRadio
>> Registered Kenwood_ITM = ITMRadio
>> Registered Puxing_PX-777 = Puxing777Radio
>> Registered Puxing_PX-2R = Puxing2RRadio
>> Registered Kenwood_TH-D72_clone_mode = THD72Radio
>> Registered TYT_TH-UVF1 = TYTTHUVF1Radio
>> Registered TYT_TH-UV3R = TYTUV3RRadio
>> Registered Kenwood_TK-7102 = KenwoodTK7102Radio
>> Registered Kenwood_TK-8102 = KenwoodTK8102Radio
>> Registered Kenwood_TK-7108 = KenwoodTK7108Radio
>> Registered Kenwood_TK-8108 = KenwoodTK8108Radio
>> Registered Baofeng_UV-5R = BaofengUV5R
>> Registered Baofeng_F-11 = BaofengF11Radio
>> Registered Baofeng_UV-82 = BaofengUV82Radio
>> Registered Baofeng_UV-B5 = BaofengUVB5
>> Registered Yaesu_VX-2 = VX2Radio
>> Registered Yaesu_VX-3 = VX3Radio
>> Registered Yaesu_VX-5 = VX5Radio
>> Registered Yaesu_VX-6 = VX6Radio
>> Registered Yaesu_VX-7 = VX7Radio
>> Registered Yaesu_VX-8_R = VX8Radio
>> Registered Yaesu_VX-8_DR = VX8DRadio
>> Registered Yaesu_VX-8_GE = VX8GERadio
>> Registered Vertex_Standard_VXA-700 = VXA700Radio
>> Registered Wouxun_KG-UVD1P = KGUVD1PRadio
>> Registered Wouxun_KG-UV6 = KGUV6DRadio
>> Registered Wouxun_KG-816 = KG816Radio
>> Registered Wouxun_KG-818 = KG818Radio
>> Skipping existing stock config
>> Skipping existing stock config
>> Skipping existing stock config
>> Skipping existing stock config
>> Skipping existing stock config
>> Skipping existing stock config
>> Skipping existing stock config
>> Skipping existing stock config
>>  ÷70
>>  ÷70
>> Bandplan North American Band Plan has duplicates [1800000-2000000 160
>> Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ]
>> Bandplan North American Band Plan has duplicates [1800000-1810000
>> Digimodes simplex , 1800000-1810000 Digital Modes simplex ]
>> Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons
>> simplex mode: CW , 1999000-2000000 Beacons simplex ]
>> Bandplan North American Band Plan has duplicates [3500000-4000000 80
>> Meter Band simplex , 3500000-4000000 80 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [7000000-7300000 40
>> Meter Band simplex , 7000000-7300000 40 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [10100000-10150000 30
>> Meter Band simplex , 10100000-10150000 30 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [10130000-10140000 All
>> narrow band digimodes simplex , 10130000-10140000 RTTY simplex mode: RTTY ]
>> Bandplan North American Band Plan has duplicates [10140000-10150000 All
>> modes, digimodes, no phone simplex , 10140000-10150000 Packet simplex ]
>> Bandplan North American Band Plan has duplicates [14000000-14350000 20
>> Meter Band simplex , 14000000-14350000 20 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [18068000-18168000 17
>> Meter Band simplex , 18068000-18168000 17 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [21000000-21450000 15
>> Meter Band simplex , 21000000-21450000 15 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [24890000-24990000 12
>> Meter Band simplex , 24890000-24990000 12 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [28000000-28070000 CW
>> simplex mode: CW , 28000000-28070000 CW simplex mode: CW ]
>> Bandplan North American Band Plan has duplicates [28150000-28190000 All
>> narrow band modes, digimodes simplex , 28150000-28190000 CW simplex mode:
>> CW ]
>> Bandplan North American Band Plan has duplicates [29000000-29200000 All
>> modes, AM preferred simplex mode: AM , 29000000-29200000 AM simplex mode:
>> AM ]
>> Bandplan North American Band Plan has duplicates [29300000-29510000
>> Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ]
>> Bandplan North American Band Plan has duplicates [1800000-2000000 160
>> Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ]
>> Bandplan North American Band Plan has duplicates [1800000-1810000
>> Digimodes simplex , 1800000-1810000 Digital Modes simplex ]
>> Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons
>> simplex mode: CW , 1999000-2000000 Beacons simplex ]
>> Bandplan North American Band Plan has duplicates [3500000-4000000 80
>> Meter Band simplex , 3500000-4000000 80 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [7000000-7300000 40
>> Meter Band simplex , 7000000-7300000 40 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [10100000-10150000 30
>> Meter Band simplex , 10100000-10150000 30 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [10130000-10140000 All
>> narrow band digimodes simplex , 10130000-10140000 RTTY simplex mode: RTTY ]
>> Bandplan North American Band Plan has duplicates [10140000-10150000 All
>> modes, digimodes, no phone simplex , 10140000-10150000 Packet simplex ]
>> Bandplan North American Band Plan has duplicates [14000000-14350000 20
>> Meter Band simplex , 14000000-14350000 20 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [18068000-18168000 17
>> Meter Band simplex , 18068000-18168000 17 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [21000000-21450000 15
>> Meter Band simplex , 21000000-21450000 15 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [24890000-24990000 12
>> Meter Band simplex , 24890000-24990000 12 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [28000000-28070000 CW
>> simplex mode: CW , 28000000-28070000 CW simplex mode: CW ]
>> Bandplan North American Band Plan has duplicates [28150000-28190000 All
>> narrow band modes, digimodes simplex , 28150000-28190000 CW simplex mode:
>> CW ]
>> Bandplan North American Band Plan has duplicates [29000000-29200000 All
>> modes, AM preferred simplex mode: AM , 29000000-29200000 AM simplex mode:
>> AM ]
>> Bandplan North American Band Plan has duplicates [29300000-29510000
>> Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ]
>> DTCS Code supported: True
>> DTCS Rx Code supported: True
>> DTCS Pol supported: True
>> Mode supported: True
>> Offset supported: True
>> Name supported: False
>> Tune Step supported: False
>> Name supported: False
>> ToneSql supported: True
>> Cross Mode supported: True
>> Comment supported: False
>> DTCS Code supported: True
>> DTCS Rx Code supported: True
>> DTCS Pol supported: True
>> Mode supported: True
>> Offset supported: True
>> Name supported: False
>> Tune Step supported: False
>> Name supported: False
>> ToneSql supported: True
>> Cross Mode supported: True
>> Comment supported: False
>> Digits: 0
>> Digits: 0
>> ÿÿÿÿ
>> ÿÿÿÿ
>> Bandplan North American Band Plan has duplicates [1800000-2000000 160
>> Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ]
>> Bandplan North American Band Plan has duplicates [1800000-1810000
>> Digimodes simplex , 1800000-1810000 Digital Modes simplex ]
>> Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons
>> simplex mode: CW , 1999000-2000000 Beacons simplex ]
>> Bandplan North American Band Plan has duplicates [3500000-4000000 80
>> Meter Band simplex , 3500000-4000000 80 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [7000000-7300000 40
>> Meter Band simplex , 7000000-7300000 40 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [10100000-10150000 30
>> Meter Band simplex , 10100000-10150000 30 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [10130000-10140000 All
>> narrow band digimodes simplex , 10130000-10140000 RTTY simplex mode: RTTY ]
>> Bandplan North American Band Plan has duplicates [10140000-10150000 All
>> modes, digimodes, no phone simplex , 10140000-10150000 Packet simplex ]
>> Bandplan North American Band Plan has duplicates [14000000-14350000 20
>> Meter Band simplex , 14000000-14350000 20 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [18068000-18168000 17
>> Meter Band simplex , 18068000-18168000 17 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [21000000-21450000 15
>> Meter Band simplex , 21000000-21450000 15 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [24890000-24990000 12
>> Meter Band simplex , 24890000-24990000 12 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [28000000-28070000 CW
>> simplex mode: CW , 28000000-28070000 CW simplex mode: CW ]
>> Bandplan North American Band Plan has duplicates [28150000-28190000 All
>> narrow band modes, digimodes simplex , 28150000-28190000 CW simplex mode:
>> CW ]
>> Bandplan North American Band Plan has duplicates [29000000-29200000 All
>> modes, AM preferred simplex mode: AM , 29000000-29200000 AM simplex mode:
>> AM ]
>> Bandplan North American Band Plan has duplicates [29300000-29510000
>> Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ]
>> Bandplan North American Band Plan has duplicates [1800000-2000000 160
>> Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ]
>> Bandplan North American Band Plan has duplicates [1800000-1810000
>> Digimodes simplex , 1800000-1810000 Digital Modes simplex ]
>> Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons
>> simplex mode: CW , 1999000-2000000 Beacons simplex ]
>> Bandplan North American Band Plan has duplicates [3500000-4000000 80
>> Meter Band simplex , 3500000-4000000 80 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [7000000-7300000 40
>> Meter Band simplex , 7000000-7300000 40 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [10100000-10150000 30
>> Meter Band simplex , 10100000-10150000 30 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [10130000-10140000 All
>> narrow band digimodes simplex , 10130000-10140000 RTTY simplex mode: RTTY ]
>> Bandplan North American Band Plan has duplicates [10140000-10150000 All
>> modes, digimodes, no phone simplex , 10140000-10150000 Packet simplex ]
>> Bandplan North American Band Plan has duplicates [14000000-14350000 20
>> Meter Band simplex , 14000000-14350000 20 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [18068000-18168000 17
>> Meter Band simplex , 18068000-18168000 17 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [21000000-21450000 15
>> Meter Band simplex , 21000000-21450000 15 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [24890000-24990000 12
>> Meter Band simplex , 24890000-24990000 12 Meter Band simplex ]
>> Bandplan North American Band Plan has duplicates [28000000-28070000 CW
>> simplex mode: CW , 28000000-28070000 CW simplex mode: CW ]
>> Bandplan North American Band Plan has duplicates [28150000-28190000 All
>> narrow band modes, digimodes simplex , 28150000-28190000 CW simplex mode:
>> CW ]
>> Bandplan North American Band Plan has duplicates [29000000-29200000 All
>> modes, AM preferred simplex mode: AM , 29000000-29200000 AM simplex mode:
>> AM ]
>> Bandplan North American Band Plan has duplicates [29300000-29510000
>> Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ]
>> DTCS Code supported: True
>> DTCS Rx Code supported: True
>> DTCS Pol supported: True
>> Mode supported: True
>> Offset supported: True
>> Name supported: True
>> Tune Step supported: True
>> Name supported: True
>> ToneSql supported: True
>> Cross Mode supported: True
>> Comment supported: False
>> DTCS Code supported: True
>> DTCS Rx Code supported: True
>> DTCS Pol supported: True
>> Mode supported: True
>> Offset supported: True
>> Name supported: True
>> Tune Step supported: True
>> Name supported: True
>> ToneSql supported: True
>> Cross Mode supported: True
>> Comment supported: False
>> %.1f
>> %.1f
>> %.1f
>> Exception running RadioJob: Value 108.1 not in range 65.0-108.0
>> -- Exception: --
>> Traceback (most recent call last):
>>   File "chirpui\common.pyo", line 111, in _execute
>>   File "chirp\uvb5.pyo", line 635, in get_settings
>>   File "chirp\settings.pyo", line 106, in __init__
>>   File "chirp\settings.pyo", line 124, in set_value
>> InvalidValueError: Value 108.1 not in range 65.0-108.0
>> ------
>> Job Args:   ()
>> Job KWArgs: {}
>> Job Called from:
>>
>>   File "chirpw", line 154, in <module>
>>   File "chirpui\mainapp.pyo", line 1332, in mh
>>   File "chirpui\mainapp.pyo", line 321, in do_open
>>   File "chirpui\editorset.pyo", line 141, in __init__
>>   File "chirpui\settingsedit.pyo", line 57, in __init__
>>
>> Toplevel is not a group
>> Closing 1
>> RadioThread exiting
>> Closing 0
>> RadioThread exiting
>>
>>
>>
>> Doug
>> ComFest
>> Parking Chairman, Entertainment and Operations Committees
>> 614-654-4844
>>
>> S/V Kerberos Corsair 28R #100
>> Welcome to the dark side... We have cookies.
>> Entropy all ways wins!  Things fall apart, it's scientific.
>>
>>
>> On Wed, Oct 23, 2013 at 5:42 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>>> Hi Doug,
>>>
>>>
>>> On Wed, Oct 23, 2013 at 4:10 PM, Doug <sailsfast at gmail.com> wrote:
>>>
>>>> So two issues.  I am using the latest Daily with 2 new B5s that work
>>>> fine.
>>>>
>>>> 1 - I can download from the radio....  When I do the channel tab is
>>>> populated but the Settings tab is blank.  If I enable Developer mode I can
>>>> see data for the settings but I wouldn't want to edit it there.
>>>>
>>>
>>> I just downloaded and installed the latest daily build, CHIRP
>>> daily-20131022, and disabled the "Enable Developer Functions" and I can see
>>> all of the settings just fine. Would you verify the build that you are
>>> using? What operating system are you using? Are you getting any errors?
>>>
>>> How about providing a debug.log file for us to look at?
>>>
>>> http://chirp.danplanet.com/projects/chirp/wiki/How_to_report_issues
>>>
>>>
>>>> 2 - in the Memory (channels) tab their are 4 settings columns missing,
>>>> BCL Reverse Duplex PT ID and Compander missing.  That would mean that one
>>>> would need to select each channel and use the right click Edit function on
>>>> each channel individualy.
>>>>
>>>
>>> The columns that you mention are not available from the Memories
>>> spreadsheet editor. As you already know these settings are only available
>>> from the Detail Editor (right-click on a row and select "Edit"). What you
>>> need to know that you can use the Detail Editor to edit multiple channels
>>> at the same time.
>>>
>>> Say you want to enable Busy Channel Lockout on memory channels 3, 4, 5
>>> and 7, here's what you do.
>>>
>>> Click Loc 3 (row 3 becomes highlighted)
>>> Shift-click Loc 7 (rows 3, 4, 5, 6 and 7 are now selected)
>>> Ctrl-click Loc 6 (row 6 is deselected so now only rows 3, 4, 5 and 7 are
>>> selected)
>>> Right-click any one of the selected rows (a menu pops up)
>>> Select "Edit" (the "Edit Multiple Memories" Detail Editor will pop up)
>>> Click the tick box to the left of BCL to enable editing that setting
>>> Click the tick box to the right of BCL to select "Enabled"
>>> Click the [OK] button to exit the menu.
>>>
>>> That's all there is to it. And you could have at the same time changed
>>> any other settings that you want to be the same for the selected group of
>>> channels.
>>>
>>>
>>>> What am I doing wrong?
>>>>
>>>> Thanks
>>>>
>>>> Doug
>>>>
>>>
>>> Jim KC9HI
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20131023/99c5d9b9/attachment.html 