[chirp_users] Baofeng uv-5r plus not able to read from

[Tony Cratz]

On 10/10/2013 02:18 AM, Jim Unroe wrote:
> If the above isn't the problem, then I would suspect that the
> programming cable is bad and needs replaced.
> 
> Jim KC9HI


	I want to follow up on this thread I started. After trying to
	trim the orginal connector on the cable I had and trying it
	again, it failed.

	I did order a new cable which had on it the Baofeng name. It
	showed up Friday and last night I tried it.

	The cable worked with no problem what so ever. Which means the
	other cable I bought was bad. It was not the connector but the
	cable itself.

	Now that I have a good working cable I have been able to
	download from the radio and also upload to it with no problem.

	Chrip worked fine and I have already added some 70+ channels to
	my new UV-5R+.


								Tony