[chirp_users] Download & execute

[John LaMartina]

To start, go Download the Latest Daily Build to your PC.

http://www.miklor.com/COM/UV_CHIRP.php

 

CHIRP is designed to work with a great number of PCs.

For CHIRP to recognize what radio you have you need to Download Image from Radio to CHIRP to set up the initial image.

Now you can start entering data for your radio.

When finished, then you can upload the new template image to your radio. 

Obviously you can't do this part until your cable arrives.

 

While you are waiting for your cable to arrive, read the Drivers page thoroughly at Miklor.com 

The biggest problem most people run into is not running the proper drivers when using a generic programming cable.

If the wrong driver is installed, it will not work. For XP you need Prolific 2.0.2.1

http://www.miklor.com/COM/UV_Drivers.php

 

Hope this helps.

John K3NXU

http://www.miklor.com

 

 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Greg Douglass
Sent: Sunday, October 06, 2013 2:59 AM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] Download & execute

 

I need help getting chirp to down load, extract in to XP. Have down load to XP desk top , c & my documents, Can't find an execute
file to get chip to load up. Have z7 zip on desk top to. Can some on give me a step by step. I don't have a cable or radio yet.
Wanted to pick and load my repeats so I'm ready when the hardware arrives. Thanks KB0VOY

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20131006/7f400219/attachment.html