[chirp_users] (no subject)

[John LaMartina]

The biggest issue most people run into is not running the proper drivers when using a generic programming cable.

If you are running Vista, Win7 or Win8, your driver cannot be newer than Prolific 3.2.0.0

 

This driver is found in the DRIVERS and USB Cables section. If the wrong driver is installed, it will not work.
http://www.miklor.com/COM/UV_Drivers.php

A link to CHIRP software with Guide and Examples can also be found at http://www.miklor.com/UV5R

Enjoy your new toy.

 

John K3NXU

 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of barry stoltz
Sent: Thursday, November 21, 2013 10:34 PM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] (no subject)

 

how do I program my baofeng  uv-5r,using your download?
?barry    ke3kv at yahoo.com   tnx

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20131122/4bbd085c/attachment.html