[chirp_users] "radio did not respond"

Madison Jones w5mj at hal-pc.org
Tue May 28 20:59:37 PDT 2013


I am a new user to the Baofeng F-11 so I might not be getting things
correct, though I have reinstalled the cloning cable driver [it is on Com 3]
using the Win7 procedure outlined by Wouxun and reinstalled Chirp.  

 

When I initially obtained the radio, I pulled up the stock channel program,
changed it around a little and uploaded it to the radio using Chirp.  A few
days later I  manually programmed several of the memories and deleted most
of the stock memories.

 

Now, when going to the Radio tab on the Chirp software and attempting to
Download from Radio, I get an error message which says "radio did not
respond."  I get the same error message when attempting to upload to the
radio from Chirp.  Suggestions?

 

Madison Jones

W5MJ

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130528/7a9e7065/attachment-0002.html 


More information about the chirp_users mailing list