[chirp_users] Wouxun KG-UV3D

Jim Bieker jim.bieker at adscomputers.com
Mon May 27 09:53:09 PDT 2013


Ok I wrote back the original but no change.  The two issues I have is 
not be able to Change voice to off only English, Narrow or Wide always 
stays on narrow.  Have tried both types of reset with no change in these 
to functions. Looking for any suggestions

On 5/22/2013 6:42 PM, Jim Unroe wrote:
> On Wed, May 22, 2013 at 9:20 PM, Jim Bieker 
> <jim.bieker at adscomputers.com <mailto:jim.bieker at adscomputers.com>> wrote:
>
>     Chirp read the memory fine but when I add some channels and uploaded
>     back it sort of bricked the radio.  Unable to change some settings
>     mainly turning off voice and offset not able to save.  Tried reset no
>     luck.  Any ideas?
>     _______________________________________________
>     chirp_users mailing list
>     chirp_users at intrepid.danplanet.com
>     <mailto:chirp_users at intrepid.danplanet.com>
>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> Hi Jim,
>
> Hopefully you saved an unedited copy of the original download. Just 
> upload that back into the radio and it should be back like it was 
> originally.
>
> Jim KC9HI
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130527/c883eed2/attachment-0002.html 


More information about the chirp_users mailing list