[chirp_users] Baofeng UV5R dtmf on receive///more

kf8sj at aol.com kf8sj at aol.com
Mon May 27 08:13:29 PDT 2013


ok.  thanks for lead.
checked it out. seems to come in around $110.00, which is  a little more than slightly.  uv5r plus is out there for $49.50
canot find anywhere including factory site where this unit is approved for fcc part 20 operation.  appears to be ham only unit.  capable of out of band operation.
we are trying to stay legal.  the uv5r is listed for part 20 useage.

looks like it has the tone capability i need.  and everything else looks good.  but need the part 90!

-----Original Message-----
From: tyler neff <pyrolisys at hotmail.com>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Sent: Sun, May 26, 2013 4:04 pm
Subject: Re: [chirp_users] Baofeng UV5R dtmf on receive///



Check the TH-UVF1 it will dtmf and is only slightly more

On May 26, 2013, at 9:57, kf8sj at aol.com wrote:



thanks.  would appreciate any help possible.  with the advent of narrow banding, all our pagers will not work.  we are paged out by the sheriffs department over a public government channel using the dtmf codes.  have already explored their sending either a different pl tone, or a dcs signal, but their system is not capable
of doing either.  for the price of a handfull of pagers, could equip the entire department with these units, and gain a talk around radio.
 
not sure what an Arduino sketch is
 
73   jim studer  kf8sj



-----Original Message-----
From: Tom Morris <blueneon at gmail.com>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Sent: Sat, May 25, 2013 7:40 pm
Subject: Re: [chirp_users] Baofeng UV5R dtmf on receive


Not implemented on the radio firmware. I have an Arduino sketch that may help, I'll send it tomorrow 
Tom Morris, KG4CYX
Mad Scientist, Miami Children's Museum
This message sent from a mobile device. Silly typos provided free of charge.
On May 25, 2013 8:36 PM, <KF8SJ at aol.com> wrote:


i have need to use this radio as an alert pager for local vol. fire dept.  see where to enable dtmf on transmit, but no  capability to do so on receive.  is this possible, and/or am i missing something in the programming.
basically need to receive only one tone.
thanks for help.   jim  kf8sj

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users




_______________________________________________
hirp_users mailing list
hirp_users at intrepid.danplanet.com
ttp://intrepid.danplanet.com/mailman/listinfo/chirp_users



_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users



_______________________________________________
hirp_users mailing list
hirp_users at intrepid.danplanet.com
ttp://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
hirp_users mailing list
hirp_users at intrepid.danplanet.com
ttp://intrepid.danplanet.com/mailman/listinfo/chirp_users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130527/8460dbf2/attachment-0002.html 


More information about the chirp_users mailing list