[chirp_users] Programming an old Motorola radio?

[chris at engravedimage.com]

In some ways, still better than having to grind crystals. I still need 
to get that done for a couple old motorolas I have lying around...
On 2013-05-22 19:56, tomKD8DEG wrote:
> Hi,
> 
> Go to the site below to learn about Motorola programing. Nothing like
> programing modern day radios. Almost all of Motorola's software is 
> specific
> to that series/model, and having the right version, and some of the 
> older
> models require burning to ROM, and EPROMS. There are many different
> programing cables, again series/model specific, and then there is the 
> RIB,
> Radio Interface Box, required for a lot of the programing. I have 
> found that
> DOS is the only way and a slow processor.
> 
> http://www.batlabs.com/
> 
> KD8DEG  Tom
> 
> -----Original Message-----
> From: chirp_users-bounces at intrepid.danplanet.com
> [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Tom 
> Hayward
> Sent: Wednesday, May 22, 2013 7:30 PM
> To: Discussion of CHIRP
> Subject: Re: [chirp_users] Programming an old Motorola radio?
> 
> On Wed, May 22, 2013 at 4:12 PM, <chris at engravedimage.com> wrote:
>> 
>> I did not see any Motorola radios on the list of open tickets for new
>> radios to be supported.
>> 
>> Chris.
>> KC8UFV
> 
> There are a couple:
> http://chirp.danplanet.com/search/index/chirp?q=motorola
> 
> Personally I don't want to volunteer because I've heard the old 
> Motorolas
> brick easily.
> 
> Tom KD7LXL
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users