[chirp_users] FT-60 help please
k4rjjradio at gmail.com
Sat Jul 6 23:53:46 PDT 2013
Found strange thing. To make it read I had to HOLD DOWN the PTT. Not just
press it. Read fine and I have a good file here. Now the darn thing won't
write to the radio. Is there a sequence for that I am missing? It is in
--RX-- mode and seems ok except for the Error and not working.
Thins radio is very new. Might Yaesu have made firmware changes to Cloning?
On Sat, Jul 6, 2013 at 11:35 PM, Ronny Julian <k4rjjradio at gmail.com> wrote:
> If I was to set up the com port in advance what would be the ideal setting
> CHIRP wants to see?
> On Sat, Jul 6, 2013 at 11:28 PM, Ronny Julian <k4rjjradio at gmail.com>wrote:
>> Yep but the FT-60 uses the other type without threads. Nothing wrong
>> with my cable as it has worked fine before on these two machines when I had
>> XP on them. This has to be a COM port permissions issue or a problem with
>> the radio or maybe the program install.
>> The cable I have is one from KAWAMALL of eBay. I have bought 6 cables
>> from them and not a bad one yet.
>> On Sat, Jul 6, 2013 at 11:11 PM, Jim and Karen <jimw6llp at centurytel.net>wrote:
>>> Looks like the FT-60 uses the same type of cable that the VX-6 uses. I
>>> couldn't get any down loads with my VX-6. I noticed that the plug on
>>> the cable going to my radio had some screw threads on it near the
>>> covering and when I looked in the radio plug there were some there
>>> also. I then actually screwed the radio plug end of the cable into the
>>> plug on my radio and everything started working just fine. Made good
>>> contact I guess.
>>> Jim, W6LLP
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the chirp_users