[chirp_users] FT-60 help please

Ronny Julian k4rjjradio at gmail.com
Sat Jul 6 20:35:34 PDT 2013


If I was to set up the com port in advance what would be the ideal setting
CHIRP wants to see?



On Sat, Jul 6, 2013 at 11:28 PM, Ronny Julian <k4rjjradio at gmail.com> wrote:

> Yep but the FT-60 uses the other type without threads.  Nothing wrong with
> my cable as it has worked fine before on these two machines when I had XP
> on them.   This has to be a COM port permissions issue or a problem with
> the radio or maybe the program install.
>
> The cable I have is one from KAWAMALL of eBay.  I have bought 6 cables
> from them and not a bad one yet.
>
>
>
>
> On Sat, Jul 6, 2013 at 11:11 PM, Jim and Karen <jimw6llp at centurytel.net>wrote:
>
>> Looks like the FT-60 uses the same type of cable that the VX-6 uses.  I
>> couldn't get any down loads with my VX-6.  I noticed that the plug on
>> the cable going to my radio had some screw threads on it near the
>> covering and when I looked in the radio plug  there were some there
>> also.  I then actually screwed the radio plug end of the cable into the
>> plug on my radio and everything started working just fine. Made good
>> contact I guess.
>>
>> Jim, W6LLP
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130706/e70faf31/attachment-0002.html 


More information about the chirp_users mailing list