[chirp_users] New Chirp User ???

Jim Unroe rock.unroe at gmail.com
Mon Jan 14 13:41:51 PST 2013


Hi Bill,
Visit the Miklor website ( miklor.com/uv5r/ you will be redirected to
http://uv5r.99k.org/) and then access the "CHIRP Software & FAQs" page. On
that page there are links to a CHIRP Guide and a CHIRP Examples page. I am
in the process of updating the guide, but it sill still answer a lot of
your questions.
Jim KC9HI

On Mon, Jan 14, 2013 at 4:04 PM, Bill Gabbard <wcgabbard1 at windstream.net>wrote:

> **
> *I'm a new user to Chirp & have a Baofeng UV-5RA (BFB297).  I'm using the
> Chirp Daily Build from 20130111.  A few questions:*
> *--Is the Freq. on the spreadsheet the TX or the RX Freq.?*
> *--On all Channels but where I've put a Tone of 151.4, it displays 88.5,*
> *--Also shows 88.5 on ToneSql, 023 in DTCS Code & DTCS RX Code,*
> *--What is DTCS Pol which shows NN on all channels,*
> *--Is there a source I'm not aware of that explains the meaning of each
> Column?  Some like Name, Tone Mode, Duplex, Offset, Mode, Power, & Skip I
> know but others I don't.*
> *73s & thanks,*
> *Bill*
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130114/01b8bdaa/attachment-0002.html 


More information about the chirp_users mailing list