[chirp_users] UV5R

John LaMartina ☀
Thu Jan 31 17:26:31 PST 2013


Max,
The message you are getting is described at
http://www.miklor.com/uv5r/UV5R-ErrorMess.html
Looks like the cable is not seated properly.
John K3NXU 

The UV5R USER's GUIDE: http://www.miklor.com/uv5r/UserGuide
and FAQ Page: http://www.miklor.com/uv5r/FAQ 
will help you with the UV5R learning curve.

Hope this helps.
-----
Sent via iPadX


On Jan 31, 2013, at 8:05 PM, "Bernie Thames" <thamesmeister at charter.net> wrote:

> Tried it but got an error saying the radio did not respond.  Being totally unfamiliar with this radio, do I have to set it up or be in some menu area to download?
>  
> Max
>  
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Bret Hedrington
> Sent: Thursday, January 31, 2013 1:18 PM
> To: 'Discussion of CHIRP'
> Subject: Re: [chirp_users] UV5R
>  
> The stable build does not support the uv-5r radios…
>  
> You have to use the latest daily build…
>  
> Try this one…
>  
> http://trac.chirp.danplanet.com/chirp_daily/daily-20130128
>  
> Bret
>  
>  
>  
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Bernie Thames
> Sent: Thursday, January 31, 2013 11:05 AM
> To: 'Discussion of CHIRP'
> Subject: Re: [chirp_users] UV5R
>  
> I downloaded Chirp and have what I assume is the last stable build.  However, I just got my radio, which is a Baofeng UV-5RA with BFB297 firmware.  I went back to the website expecting to have this build since the one I downloaded 0.2.3 does not have my handheld.  I went to the repository and couldn’t find a link that included mine.
>  
> Where can I find this one as, I’d at least like to have the build which is 2012-2221222 (I think).
>  
> Regards,
>  
> Max
>  
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of John LaMartina ?
> Sent: Thursday, January 31, 2013 8:55 AM
> To: Harvey Iri; Discussion of CHIRP
> Subject: Re: [chirp_users] UV5R
>  
> I would guess you need the access tones to work properly.
> CHIRP should be able to program you radio with no problem.
> 
> -----
> Sent via iPadX
>  
> 
> On Jan 31, 2013, at 7:51 AM, Harvey Iri <kp4gyo at yahoo.com> wrote:
> 
> Hello
>  
> I am having a small issue I tries to program my UV5R with the frequencies of my job and I cannot transmit on them, all it does is receive my co-workers, but no transmit. On my repeaters it works fine. the frequencies in question are in the 161 MHZ and 162 MHZ
> range. I used the Baofeng Software, and did not work. So then I used the Chirp and was able to pu t it on the radio but again no transmit. Version on my radio is the older version. If there is any other software I can use to unlock those 2 frequencies let me know, if you have any questions for more information  just email me.
>  
>  
> Thanks,
>            Harvey.
>  
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130131/52c98f25/attachment.html 


More information about the chirp_users mailing list