[chirp_users] help programming public safety information

[Kevin Badger]

done.  what about the cross mode column.  it is set to tone->tone

tone->tone according to the chirp programming reference guide made by kc9hi
which is posted to the link that i am including
http://kc9hi.dyndns.org/uv5r/programming/CHIRP%20Guide.pdf

well anyways on page two of this programming guide it has listed for the
tone->tone description/comment:  The radio will use CTCSS for transmit and
a different CTCSS for receive

that description/comment is what is confusing.  so what should be the
setting for the cross mode if i only want a transmit ctcss tone and no
receive tone.

Doc N0UKM


On Sat, Feb 16, 2013 at 11:58 PM, Tom Hayward <esarfl at gmail.com> wrote:

> On Sat, Feb 16, 2013 at 8:49 PM, Kevin Badger <18dmedic at gmail.com> wrote:
> > what i am needing to do is this:  program only a transmit tone and it
> does
> > not matter if it is ctcss or dcs.  the agencies i work with do not
> require a
> > receive tone.  only a transmit tone is needed.
>
> Set the Tone Mode column to Tone.
>
> Tom KD7LXL
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>



-- 
Doc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130217/a6959d0d/attachment.html