[chirp_users] Programming PL into UV-5R

scott richardson elmrich120966 at yahoo.com
Fri Dec 6 09:02:10 PST 2013


Thanks again for all the help Jim. I've been around scanners for about 25 years but the UV-5R is pretty different. I'll let you know if it works ok. 

--------------------------------------------
On Fri, 12/6/13, Jim Unroe <rock.unroe at gmail.com> wrote:

 Subject: Re: [chirp_users] Programming PL into UV-5R
 To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
 Date: Friday, December 6, 2013, 11:06 AM
 
 No problem. The first thing
 that you should do it to click "View" in the menu
 bar and enable "Hide Unused Fields" if it
 isn't already.
 
 
 RX only:
 
 Tone Mode: Cross
 DTCS Rx Code: 465
 DTCS Pol: NN
 
 Cross Mode: ->DTCS
 
 RX and TX (you
 don't need the TX code to listen but it doesn't hurt
 to have it set):
 
 Tone Mode: DTCS
 
 DTCS Code: 465
 DTCS Pol: NN
 
 You might be
 interested in looking at the "CHIRP Guide" on the
 Miklor.com website and the "Understand CHIRP's
 columns" guide available from the CHIRP wiki pages.
 
 
 http://www.miklor.com/COM/UV_CHIRP.php
 http://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns
 
 
 Jim KC9HI
 
 On Fri, Dec 6, 2013 at 10:46 AM, scott richardson <elmrich120966 at yahoo.com>
 wrote:
 
 Thanks for the help Jim.
 I've already done as you instructed but I was wanting to
 find a way to program the PL because another town's PD
 is coming through too. I was wondering if there is a way to
 block unwanted signals.
 
 
 
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 chirp_users mailing list
 chirp_users at intrepid.danplanet.com
 http://intrepid.danplanet.com/mailman/listinfo/chirp_users
 



More information about the chirp_users mailing list