[chirp_users] Programming Anytone mobile

[Jens J.]

Actually, you can cut out a step. You dont need to export to csv.

.img are the radio "image" files, which are representations of the radio's memory, and therefore specific to your exact model, and in most cases, the exact radio.
Therefore, you cannot just open image from radio A and upload it to image B.

For copying channels from radio A to B:
1. download from radio A, and save as A.img
2. download from radio B and save as B.img (or alternatively, open a recently saved image from B)
3. in radio B's layout, do file, import. change the type from "chirp files (*.chirp)" to "chirp radio images (*.img)"

This will engage the import feature, just as if you had gone through additional, intermediate steps of exporting to and importing from csv, which isnt completely necessary.

As others have pointed out, you can also just do copy and paste.


________________________________
 From: Dave C <cavanadd at frontier.com>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
Sent: Wednesday, December 11, 2013 12:55 AM
Subject: Re: [chirp_users] Programming Anytone mobile
 

Oh, and thanks for the tip on Import/Export.  It's been a long day and I 
missed trying that.  Looks like I can export my HT file as a .csv and 
then import it into a new file and load into the Anytone. Will mess 
around with it more tomorrow.

Dave
KG7HBQ


On 12/10/2013 10:22 PM, Tom Hayward wrote:
> Dave,
> >to move channel tables between two different radios, you will need to use export/import features.


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20131211/025f2a02/attachment.html