[chirp_users] Chirp and radio parameters not agreeing

Jim Unroe rock.unroe at gmail.com
Thu Aug 15 15:10:50 PDT 2013


On Thu, Aug 15, 2013 at 5:48 PM, Donald Stewart <djstewart at metrocast.net>wrote:

> With UV5R selected as the radio, I downloaded to chirp from the radio in
> the channel mode.  chirp said Loc 1 was 451.860000   Loc 2 was
> 462.725000.  then reading the radio in frequency mode I saw ch-1 was
> 451.872 and ch-2 was 470.637
>
> Hi Don,

It shouldn't matter if you are in VFO or MR mode when using CHIRP to read
from or write to your radio.

Would you please save these differing downloads and email them to me along
with a list of the frequencies that are in the radio?

Also do you have the Baofeng software installed? If you do, email me the
.dat file saved from the radio too.

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130815/8ba36cec/attachment-0002.html 


More information about the chirp_users mailing list