[chirp_users] Chirp and radio parameters not agreeing

Andrew ziltro at ziltro.com
Thu Aug 15 15:06:29 PDT 2013

I've just had a test with my UV-5RA... This could happen if your 
channels are duplex frequencies and you have Reverse turned on - then it 
will be displaying the TX frequency not the RX frequency. If there's an 
"R" in the display, press "*" and it should return to normal.



On 15/08/13 22:48, Donald Stewart wrote:
> With UV5R selected as the radio, I downloaded to chirp from the radio in
> the channel mode.  chirp said Loc 1 was 451.860000   Loc 2 was
> 462.725000.  then reading the radio in frequency mode I saw ch-1 was
> 451.872 and ch-2 was 470.637
> On 8/15/2013 5:29 PM, Andrew wrote:
>> How much do they differ? Is it the same amount on each channel?
>> And are you sure you have the radio in Channel Mode not Frequency Mode? :)
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users

More information about the chirp_users mailing list