[chirp_users] Step setting on radios

[Pat Anderson]

Trump me if I am mistaken, but the usual step value in the US is 5 mhz.


On Thu, Aug 29, 2013 at 9:14 PM, Mike Morrow <mike at primecareercollege.com>wrote:

> The step is the channel spacing amount.  You can set this on many radios
> from 25 to 2.5 MHz.  When you turn a tuning know in VFO mode, this is the
> amount the radio changes frequency by.  ****
>
> ** **
>
> If the radio’s step is too high, it will not allow entry of some
> frequencies and will do something (variable by radio) to go to the next
> higher or lower frequency which complies with the step value you have set.
> ****
>
> ** **
>
> Mike****
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130830/7048b041/attachment.html