[chirp_users] UV-5r

[KF6MXK]

Thank You
Phil KF6MXK
On 8/4/2013 3:07 PM, John LaMartina wrote:
>
> Phil,
>
> The following links may assist with the resolution.
>
> Drivers
>
> http://www.miklor.com/COM/UV_Drivers.php
>
> CHIRP
>
> http://www.miklor.com/COM/UV_CHIRP.php
>
> Check to FAQ at the bottom
>
> Hope this helps.
>
> John K3NXU
>
> http://www.miklor.com/uv5r
>
> *From:*chirp_users-bounces at intrepid.danplanet.com 
> <mailto:chirp_users-bounces at intrepid.danplanet.com> 
> [mailto:chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Jim 
> Unroe
> *Sent:* Sunday, August 04, 2013 2:53 PM
> *To:* Discussion of CHIRP
> *Subject:* Re: [chirp_users] UV-5r
>
> On Fri, Aug 2, 2013 at 11:04 PM, KF6MXK <pcornyn at bak.rr.com 
> <mailto:pcornyn at bak.rr.com>> wrote:
>
> I have programed many other radios and there has been a menu setting to
> get into program mode. I have connected my UV-5r to the computer and
> selected the correct Comm Port, nothing. What do i have to do to program
> this radio?
> Phil KF6MXk
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users

-- 
Sent From My Mancave Above Cable MP 358 Tehachapi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130804/f8492864/attachment.html