[chirp_users] UV5R+ and chirp trouble

[Jim Unroe]

On Tue, Apr 30, 2013 at 5:12 PM, <clark at clarkturnertuning.com> wrote:

> Thanks Ted.  That explains why the display is set to -and +. But the
> offset is listed as 0.000 and you cannot change the memory Ch offset once
> programmed. So it will not offset.  Even though the Chirp IMG file shows
> the offset.  I think its a newer firmware issue and something has changed
> stopping the programming.  There are three of us here and all three cannot
> get the radios to work unless they are programmed manual.
>
> C
>
> Clark,

This is not a firmware issue. If you can work the repeater in VFO/Frequency
mode and not in MR/Channel mode, you are programming the channel wrong with
CHIRP. Email me you CHIRP image file and I will look at it. I am sure this
can easily be cleared up. Send the image file to: uv5r [at] kc9hi [dot] net

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130430/4c7d4f69/attachment.html