[chirp_users] Version of Baofeng UV-5R not supported by CHIRP?

George Hale Jr. ghalejr at gmail.com
Wed Oct 24 15:52:09 PDT 2012

I was referring to the file that you can save with all the information for
each channel. I have both my UV-5R's loaded the same. But I could not make
the file, load it to one, then switch radios, and load it to the other. I
had to download the info from the new radio, before I could get it to load
the new channel file to the radio.

On Wed, Oct 24, 2012 at 4:33 PM, Dan Smith <dsmith at danplanet.com> wrote:

> > What you cannot do, is load one radio, then go to the other radio,
> > and load it.
> ...across versions of the UV-5R, correct. That's because they decided to
> change their memory layout for the later versions of the firmware.
> > When you go to the other version, you need to download from the
> > radio, the open the file with all your saved info, and upload it to
> > the new radio. In other words, download from the radio, even if you
> > do not intend to use the file, that seems to be what tells chirp what
> > version radio you have.
> I'm not sure what you're trying to say here, but CHIRP doesn't store any
> information about what radios (or versions) you have.
> --
> Dan Smith
> www.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121024/3a91529c/attachment-0002.html 

More information about the chirp_users mailing list