[chirp_users] BFB293

Marty Hartwell mhartwe at gmail.com
Sat Nov 3 10:17:31 PDT 2012

Hi Rafael

I will try to help. As a review of procedure. First
you need to get communication with the rig setup so
you can have a template of the memory, So when you
have communication set up and can click on the radio
tab at the top of the CHIRP screen you then click on
"download from radio" which will then show up on the
PC screen with a little window showing progress. Then
another screen showing contents of memory.
Now on the CHIRP screen under file click "save as"
and give it a name.
Now that you have the memory contents you can edit/add
more content and again save.
Now to the part of your question, On the radio tab again,
you now will see an option to "upload to radio" because you
have content in the program template that is ready to load.
As a note if you just want to you can open under file the
saved content to reload the memory positions.
I sometimes get things saved into memory positions on my
VX5r that I don't want, in the case of that rig I have to
do a reset that clears all memory so I can reload it with
the good stuff.
A person can have memory for several locations, say for
repeaters on east coast and west coast. A simple reset
and reload sets a rig up for either.

I hope this helps and that I understood you question too.

Marty kd8bj

On 11/03/2012 11:57 AM, Rafael Yerushalmi wrote:
> Hello there.
> How can i upload to radio with sw` BFB293 ?
> Rafael
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users

More information about the chirp_users mailing list