[chirp_users] Chirp not identifying Kenwood TM-V71

Mathew Mrosko chirp at matmrosko.com
Fri Feb 10 14:39:15 PST 2012


Dale,

FWIW, and hopefully you didn't buy the expensive Kenwood cable yet, I 
use this cheap cable with Chirp and my TM-V71A:
http://www.pccables.com/cgi-bin/orders6.cgi?action=Showitem&id=ID940742&partno=70810&search=DIN8&rsite=&rcode=

Also, as for that modem-manager process, it could be something udev 
spawns.  I recently switched from Ubuntu to Debian on all of my 
machines, otherwise I'd try to do a little more digging for you.

Mat WD4DDY

On 02/10/2012 01:53 PM, Dale Mosby wrote:
> Well thank you for the assistance in debugging. The V71A, remote 
> install kit,
> and programming cable were all purchased at the same time from Ham Radio
> Outlet (HRO) in the Portland, Oregon area.
>
> I made the incorrect assumption that this bundle of parts were all 
> going to
> work together. It now seems that HRO sold me the incorrect cable. They 
> confirmed
> this in my phone call with them just now.
>
> Sorry about starting out by blaming the software rather than the 
> hardware. :-)
>
> I will give another try with the correct cable and I suspect see 
> better results.
>
> Thanks & 73, Dale, K7FW
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20120210/44d3781f/attachment-0002.html 


More information about the chirp_users mailing list