[chirp_users] chirp_users Digest, Vol 48, Issue 6

Rafael Yerushalmi rafaely10 at gmail.com
Sat Dec 15 07:38:07 PST 2012


Hello there.

I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0
on win 7 becuse my computer have been with a virus but notning working with
the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow sigh .
when i operte chrip after a few ceconds the messege is " Radio did not
respond "
on xp it was working good ...
what is the setting for the com is it 1200 baud ? is it xon/xoff ?

need your help

best 73
Thanks



On Thu, Dec 13, 2012 at 10:00 PM, <
chirp_users-request at intrepid.danplanet.com> wrote:

> Send chirp_users mailing list submissions to
>         chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
>         chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
>         chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>    1. Ref: I need Help (WN6WJN - - Wassim)
>    2. Re: Ref: I need Help (Bob Nielsen)
>    3. Re: Ref: I need Help (Bobby Goins)
>    4. Re: Ref: I need Help (Jim Unroe)
>    5. Re: Ref: I need Help (Jim Unroe)
>    6. Re: Ref: I need Help (IZ3GME Marco)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 12 Dec 2012 15:15:00 -0800
> From: WN6WJN - - Wassim <wn6wjn at gmail.com>
> Subject: [chirp_users] Ref: I need Help
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
>         <CAPpvvnmuo+xvZuLdgKGcc-BzOhLS+ch1CSPP+=
> 03ZG2RBaAqBg at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Thanks Fred
>
> OK some more information.
>
> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
>
> I have the RT Systems USB cable for the FT60-R and an aftermarket USB cable
> for the UV-5R.
>
> I have installed the drivers for both above cables and verified the COM
> Port they are using. Both are COM4.
>
> I started CHIRP software, plugged in the RT Systems USB cable, held down
> the Moni key while turning on the FT60-R and the software responded with an
> error message stating:
>
> "An Error has occurred. Radio is not responding" with an OK button.
>
> Now I was told by a friend that the FT60-R has a problem conneting for the
> 1st time, but it will be easier there after. But then what are the tricks
> that will make it easier to connect the first time?
>
> Thanks
>
> 73
>
> Wassim
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/3e7ceb68/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Wed, 12 Dec 2012 15:41:59 -0800
> From: Bob Nielsen <n7xy at clearwire.net>
> Subject: Re: [chirp_users] Ref: I need Help
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <08EDC49F-60DD-4AEE-AD86-E38C0283327B at clearwire.net>
> Content-Type: text/plain; charset=iso-8859-1
>
> You may need to plug in the cable before starting CHIRP, so it picks the
> correct driver.
>
> Bob, N7XY
>
> On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <wn6wjn at gmail.com> wrote:
>
> > Thanks Fred
> >
> > OK some more information.
> >
> > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> >
> > I have the RT Systems USB cable for the FT60-R and an aftermarket USB
> cable for the UV-5R.
> >
> > I have installed the drivers for both above cables and verified the COM
> Port they are using. Both are COM4.
> >
> > I started CHIRP software, plugged in the RT Systems USB cable, held down
> the Moni key while turning on the FT60-R and the software responded with an
> error message stating:
> >
> > "An Error has occurred. Radio is not responding" with an OK button.
> >
> > Now I was told by a friend that the FT60-R has a problem conneting for
> the 1st time, but it will be easier there after. But then what are the
> tricks that will make it easier to connect the first time?
> >
> > Thanks
> >
> > 73
> >
> > Wassim
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
> _____
> Licensed since 1952
>
>
>
>
>
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 12 Dec 2012 19:17:18 -0500
> From: Bobby Goins <goins0497 at insightbb.com>
> Subject: Re: [chirp_users] Ref: I need Help
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <q62fty7w6ilhyd0n6vt0393n.1355356718821 at email.android.com>
> Content-Type: text/plain; charset=utf-8
>
> I unsuccessfully tried using a cheap aftermarket cord for my UV-5R+ on
> both Linux and Win7.  I never could get the radio to communicate.
>
> I ended up purchasing a cord from Valley Enterprises (no relation with the
> company) and it worked.  (No driver was needed for Linux.  I did need to
> download a driver for Win7.)
>
> I believe the cord was originally for a Kenwood KPG-22 radio.  (Valley's
> part# RPC-K1-UF.)
>
> ---
>
> Now for something fun... get a female SMA to PL259 adapter, and run your
> Baofeng through a mobile antenna.  You'll be happy! <grin>
>
>
>
>
>
> Bob Nielsen <n7xy at clearwire.net> wrote:
>
> >You may need to plug in the cable before starting CHIRP, so it picks the
> correct driver.
> >
> >Bob, N7XY
> >
> >On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <wn6wjn at gmail.com> wrote:
> >
> >> Thanks Fred
> >>
> >> OK some more information.
> >>
> >> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> >>
> >> I have the RT Systems USB cable for the FT60-R and an aftermarket USB
> cable for the UV-5R.
> >>
> >> I have installed the drivers for both above cables and verified the COM
> Port they are using. Both are COM4.
> >>
> >> I started CHIRP software, plugged in the RT Systems USB cable, held
> down the Moni key while turning on the FT60-R and the software responded
> with an error message stating:
> >>
> >> "An Error has occurred. Radio is not responding" with an OK button.
> >>
> >> Now I was told by a friend that the FT60-R has a problem conneting for
> the 1st time, but it will be easier there after. But then what are the
> tricks that will make it easier to connect the first time?
> >>
> >> Thanks
> >>
> >> 73
> >>
> >> Wassim
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> >
> >_____
> >Licensed since 1952
> >
> >
> >
> >
> >
> >
> >
> >_______________________________________________
> >chirp_users mailing list
> >chirp_users at intrepid.danplanet.com
> >http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> ------------------------------
>
> Message: 4
> Date: Wed, 12 Dec 2012 19:28:17 -0500
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Ref: I need Help
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CADnO8U4S=EOR_42NM4gxysKTWNHbzUMS0=
> v1kwePFwuNLsTgVA at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> V0.2.2 doesn't support the UV-5R. You need the latest daily build.
> Jim
> On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <wn6wjn at gmail.com> wrote:
>
> > Thanks Fred
> >
> > OK some more information.
> >
> > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> >
> > I have the RT Systems USB cable for the FT60-R and an aftermarket USB
> > cable for the UV-5R.
> >
> > I have installed the drivers for both above cables and verified the COM
> > Port they are using. Both are COM4.
> >
> > I started CHIRP software, plugged in the RT Systems USB cable, held down
> > the Moni key while turning on the FT60-R and the software responded with
> an
> > error message stating:
> >
> > "An Error has occurred. Radio is not responding" with an OK button.
> >
> > Now I was told by a friend that the FT60-R has a problem conneting for
> the
> > 1st time, but it will be easier there after. But then what are the tricks
> > that will make it easier to connect the first time?
> >
> > Thanks
> >
> > 73
> >
> > Wassim
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/f4be35aa/attachment-0001.html
>
> ------------------------------
>
> Message: 5
> Date: Wed, 12 Dec 2012 19:29:41 -0500
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Ref: I need Help
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CADnO8U6DAYeSuRdVOUukZ8fdeF5aFQcLYrBOT_JyQXZWAW8NZQ at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I meant to type v0.2.3. Sorry
> On Dec 12, 2012 7:28 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:
>
> > V0.2.2 doesn't support the UV-5R. You need the latest daily build.
> > Jim
> > On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <wn6wjn at gmail.com> wrote:
> >
> >> Thanks Fred
> >>
> >> OK some more information.
> >>
> >> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> >>
> >> I have the RT Systems USB cable for the FT60-R and an aftermarket USB
> >> cable for the UV-5R.
> >>
> >> I have installed the drivers for both above cables and verified the COM
> >> Port they are using. Both are COM4.
> >>
> >> I started CHIRP software, plugged in the RT Systems USB cable, held down
> >> the Moni key while turning on the FT60-R and the software responded
> with an
> >> error message stating:
> >>
> >> "An Error has occurred. Radio is not responding" with an OK button.
> >>
> >> Now I was told by a friend that the FT60-R has a problem conneting for
> >> the 1st time, but it will be easier there after. But then what are the
> >> tricks that will make it easier to connect the first time?
> >>
> >> Thanks
> >>
> >> 73
> >>
> >> Wassim
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>
> >>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/45a7f130/attachment-0001.html
>
> ------------------------------
>
> Message: 6
> Date: Thu, 13 Dec 2012 10:02:17 +0100
> From: IZ3GME Marco <iz3gme.marco at gmail.com>
> Subject: Re: [chirp_users] Ref: I need Help
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <50C99999.5080304 at gmail.com>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> Hi Wassim
>
> My suspect is that you simply miss a step: after starting chirp download
> you should tell to the radio to start clone-tx (from FT60 userm manual):
>
> 4. Rotate the DIAL job on each radio to select to ?F8 CLONE,?
> then press the [F/W] key momentarily.
> 5. The display will disappear for a moment, then the ?CLONE?
> notation will appear on the displays of both radios when the
> Clone mode is successfully activated in this step.
> 6. (don't do this!!!) On the Destination radio, press the MONI switch
> (?--RX- -? will appear on the LCD).
> 7. Press the PTT switch on the Source radio; ?- -TX- -? will appear
> on the Source radio, and the data from this radio will be transferred to
> the other radio
>
> In a similar way when you'll have to "save" to FT60 you have to put the
> radio in clone rx following the same procedure as above but doing step 6
> and not step 7 before to start chirp upload.
>
> Hope this can help
>
> 73 de IZ3GME Marco
>
>
> On 13/12/2012 00:15, WN6WJN - - Wassim wrote:
> > Thanks Fred
> >
> > OK some more information.
> >
> > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> >
> > I have the RT Systems USB cable for the FT60-R and an aftermarket USB
> > cable for the UV-5R.
> >
> > I have installed the drivers for both above cables and verified the COM
> > Port they are using. Both are COM4.
> >
> > I started CHIRP software, plugged in the RT Systems USB cable, held down
> > the Moni key while turning on the FT60-R and the software responded with
> > an error message stating:
> >
> > "An Error has occurred. Radio is not responding" with an OK button.
> >
> > Now I was told by a friend that the FT60-R has a problem conneting for
> > the 1st time, but it will be easier there after. But then what are the
> > tricks that will make it easier to connect the first time?
> >
> > Thanks
> >
> > 73
> >
> > Wassim
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
>
>
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 48, Issue 6
> ******************************************
>



-- 
Best wishess for you !!! ( :

Yerushalmi Rafael
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/1f1cb5f4/attachment-0002.html 


More information about the chirp_users mailing list