[chirp_users] Ref: I need Help

Jim Unroe rock.unroe at gmail.com
Wed Dec 12 16:28:17 PST 2012


V0.2.2 doesn't support the UV-5R. You need the latest daily build.
Jim
On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <wn6wjn at gmail.com> wrote:

> Thanks Fred
>
> OK some more information.
>
> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
>
> I have the RT Systems USB cable for the FT60-R and an aftermarket USB
> cable for the UV-5R.
>
> I have installed the drivers for both above cables and verified the COM
> Port they are using. Both are COM4.
>
> I started CHIRP software, plugged in the RT Systems USB cable, held down
> the Moni key while turning on the FT60-R and the software responded with an
> error message stating:
>
> "An Error has occurred. Radio is not responding" with an OK button.
>
> Now I was told by a friend that the FT60-R has a problem conneting for the
> 1st time, but it will be easier there after. But then what are the tricks
> that will make it easier to connect the first time?
>
> Thanks
>
> 73
>
> Wassim
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/f4be35aa/attachment-0002.html 


More information about the chirp_users mailing list