[chirp_users] chirp_users Digest, Vol 48, Issue 14
Rafael Yerushalmi
Sun Dec 16 11:29:39 PST 2012
how to check if it`s an older driver ?
it written : 3.2.0.0 date: 31.7.2007
do you know the port setting maybe this is the problem ?
thanks
On Sun, Dec 16, 2012 at 7:39 PM, <chirp_users-request at intrepid.danplanet.com
> wrote:
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Re: chirp_users Digest, Vol 48, Issue 11 (George Hale Jr.)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 16 Dec 2012 10:39:10 -0700
> From: "George Hale Jr." <ghalejr at gmail.com>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11
> To: JohnLa at usa.net, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAJfKeYD1N399DWFZnqDhf_1VxqYt722AtkrTKPzaPW=
> 6gi7CMQ at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I got that message, when windows loaded the newer driver. Check to be sure
> you have the older driver working.
>
> On Sun, Dec 16, 2012 at 10:28 AM, John LaMartina <JohnLa at usa.net> wrote:
>
> > The fact that you have no loop back would indicate no physical connection
> > to the board.
> > This would point to a bad cable.****
> >
> > ** **
> >
> > Anyone else have thoughts on this?****
> >
> > ** **
> >
> > John K3NXU****
> >
> > ** **
> >
> > *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> > chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Rafael
> > Yerushalmi
> > *Sent:* Sunday, December 16, 2012 11:36 AM
> > *To:* chirp_users at intrepid.danplanet.com
> > *Subject:* Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11****
> >
> > ** **
> >
> > Hello again...****
> >
> > ** **
> >
> > I run the sw` for finding the port & got the****
> >
> > messege :"com3 this port appears to be a cable without echo loopback
> ".**
> > **
> >
> > what does it main ?****
> >
> > thanks****
> >
> > ** **
> >
> > On Sun, Dec 16, 2012 at 6:29 PM, <
> > chirp_users-request at intrepid.danplanet.com> wrote:****
> >
> > Send chirp_users mailing list submissions to
> > chirp_users at intrepid.danplanet.com
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > or, via email, send a message with subject or body 'help' to
> > chirp_users-request at intrepid.danplanet.com
> >
> > You can reach the person managing the list at
> > chirp_users-owner at intrepid.danplanet.com
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of chirp_users digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Re: chirp_users Digest, Vol 48, Issue 10 (Rafael Yerushalmi)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Sun, 16 Dec 2012 18:29:05 +0200
> > From: Rafael Yerushalmi <rafaely10 at gmail.com>
> > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 10
> > To: chirp_users at intrepid.danplanet.com
> > Message-ID:
> > <CALiBrY6mzeR=nWWAPKTaQp4=
> > VxpNWLToo25V3Uc9Coz3kcz7YA at mail.gmail.com>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Hello there.
> > I upload again the driver 3.2.0.0 for the usb port com3 & also
> > give slight trimming of the cable plug side .
> > but the same messege.
> > thanks
> >
> >
> > On Sun, Dec 16, 2012 at 3:46 PM, <
> > chirp_users-request at intrepid.danplanet.com
> > > wrote:
> >
> > > Send chirp_users mailing list submissions to
> > > chirp_users at intrepid.danplanet.com
> > >
> > > To subscribe or unsubscribe via the World Wide Web, visit
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > or, via email, send a message with subject or body 'help' to
> > > chirp_users-request at intrepid.danplanet.com
> > >
> > > You can reach the person managing the list at
> > > chirp_users-owner at intrepid.danplanet.com
> > >
> > > When replying, please edit your Subject line so it is more specific
> > > than "Re: Contents of chirp_users digest..."
> > >
> > >
> > > Today's Topics:
> > >
> > > 1. Re: chirp_users Digest, Vol 48, Issue 8 (John LaMartina)
> > >
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Sun, 16 Dec 2012 08:45:53 -0500
> > > From: "John LaMartina" <JohnLa at usa.net>
> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8
> > > To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> > > Message-ID: <000f01cddb93$ab59d8c0$020d8a40$@net>
> > > Content-Type: text/plain; charset="us-ascii"
> > >
> > > If the cable is okay. the next step would be the driver.
> > >
> > > You mentioned using 3.2.0.0 which is correct for Windows 7. (XP
> > > automatically runs the correct driver)
> > >
> > >
> > >
> > > However, if you now plug the cable into a different USB port, Windows
> > will
> > > load the NEW driver for that port, not 3.2.0.0
> > >
> > > Below you mention com6 and com3 so it appears you are moving the cable
> > > from USB to USB.
> > >
> > > You will need to return to the original USB port or reload 3.2.0.0 to
> the
> > > new one.
> > >
> > >
> > >
> > > Check out the FAQ section at the bottom of this link.
> > >
> > > http://www.miklor.com/uv5r/UV5R-Drivers.html
> > >
> > >
> > >
> > > Let us know if this helps.
> > >
> > > John K3NXU
> > >
> > >
> > >
> > >
> > >
> > > From: chirp_users-bounces at intrepid.danplanet.com [mailto:
> > > chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Rafael
> > Yerushalmi
> > > Sent: Sunday, December 16, 2012 1:04 AM
> > > To: chirp_users at intrepid.danplanet.com
> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8
> > >
> > >
> > >
> > > Good morning ...
> > >
> > >
> > >
> > > 1- On the xp when its works (before the virus )the cable was ok, so the
> > >
> > > cable issue is ok( i think ).
> > >
> > > 2- I opend a two different com ( com3/com6 ) but the same result.
> > >
> > >
> > >
> > > Thanks
> > >
> > >
> > >
> > > On Sat, Dec 15, 2012 at 9:10 PM, <
> > > chirp_users-request at intrepid.danplanet.com> wrote:
> > >
> > > Send chirp_users mailing list submissions to
> > > chirp_users at intrepid.danplanet.com
> > >
> > > To subscribe or unsubscribe via the World Wide Web, visit
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > or, via email, send a message with subject or body 'help' to
> > > chirp_users-request at intrepid.danplanet.com
> > >
> > > You can reach the person managing the list at
> > > chirp_users-owner at intrepid.danplanet.com
> > >
> > > When replying, please edit your Subject line so it is more specific
> > > than "Re: Contents of chirp_users digest..."
> > >
> > >
> > > Today's Topics:
> > >
> > > 1. Re: chirp_users Digest, Vol 48, Issue 6 (John LaMartina)
> > > 2. Re: chirp_users Digest, Vol 48, Issue 6 (william coulson)
> > >
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Sat, 15 Dec 2012 11:44:16 -0500
> > > From: "John LaMartina" <JohnLa at usa.net>
> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6
> > > To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> > > Message-ID: <000601cddae3$6c632280$45296780$@net>
> > > Content-Type: text/plain; charset="us-ascii"
> > >
> > > The error message indicates that your cable is not plugged in all the
> > way.
> > > A common problem as Baofeng doesn't manufacture their own cables.
> > > See: http://www.miklor.com/uv5r/UV5R-ErrorMess.html
> > >
> > > If you haven't already, check out the UV5R User's Guide
> > > http://www.miklor.com/uv5r/UserGuide
> > >
> > > Enjoy your new Toy...
> > > John K3NXU
> > >
> > >
> > > From: chirp_users-bounces at intrepid.danplanet.com [mailto:
> > > chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Rafael
> > Yerushalmi
> > > Sent: Saturday, December 15, 2012 10:38 AM
> > > To: chirp_users at intrepid.danplanet.com
> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6
> > >
> > > Hello there.
> > >
> > > I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0
> > > on win 7 becuse my computer have been with a virus but notning working
> > with
> > > the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow
> sigh .
> > > when I operate chirp after a few seconds the message is " Radio did not
> > > respond "
> > > on xp it was working good ...
> > > what is the setting for the com is it 1200 baud ? is it xon/xoff ?
> > >
> > > Need your help
> > >
> > > best 73
> > > Thanks
> > >
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> > >
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/6efb8f37/attachment-0001.html
> > >
> > > ------------------------------
> > >
> > > Message: 2
> > > Date: Sat, 15 Dec 2012 11:09:44 -0800
> > > From: "william coulson" <wcoulson730 at gmail.com>
> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6
> > > To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
> > > Message-ID: <E5B1B60E83F0447E8CA3F4C068554DA1 at williamcoulsPC>
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > try a different COM PORT
> > >
> > > Bill
> > > ----- Original Message -----
> > > From: Rafael Yerushalmi
> > > To: chirp_users at intrepid.danplanet.com
> > > Sent: Saturday, December 15, 2012 7:38 AM
> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6
> > >
> > >
> > > Hello there.
> > >
> > >
> > > I have a UV5R BFB251 . i put the latest chrip & the usb driver
> 3.2.0.0
> > > on win 7 becuse my computer have been with a virus but notning
> working
> > > with
> > > the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow
> > sigh .
> > > when i operte chrip after a few ceconds the messege is " Radio did
> not
> > > respond "
> > > on xp it was working good ...
> > > what is the setting for the com is it 1200 baud ? is it xon/xoff ?
> > > need your help
> > >
> > > best 73
> > > Thanks
> > >
> > >
> > >
> > > On Thu, Dec 13, 2012 at 10:00 PM, <
> > > chirp_users-request at intrepid.danplanet.com> wrote:
> > >
> > > Send chirp_users mailing list submissions to
> > > chirp_users at intrepid.danplanet.com
> > >
> > > To subscribe or unsubscribe via the World Wide Web, visit
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > or, via email, send a message with subject or body 'help' to
> > > chirp_users-request at intrepid.danplanet.com
> > >
> > > You can reach the person managing the list at
> > > chirp_users-owner at intrepid.danplanet.com
> > >
> > > When replying, please edit your Subject line so it is more specific
> > > than "Re: Contents of chirp_users digest..."
> > >
> > >
> > > Today's Topics:
> > >
> > > 1. Ref: I need Help (WN6WJN - - Wassim)
> > > 2. Re: Ref: I need Help (Bob Nielsen)
> > > 3. Re: Ref: I need Help (Bobby Goins)
> > > 4. Re: Ref: I need Help (Jim Unroe)
> > > 5. Re: Ref: I need Help (Jim Unroe)
> > > 6. Re: Ref: I need Help (IZ3GME Marco)
> > >
> > >
> > >
> > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Wed, 12 Dec 2012 15:15:00 -0800
> > > From: WN6WJN - - Wassim <wn6wjn at gmail.com>
> > > Subject: [chirp_users] Ref: I need Help
> > > To: chirp_users at intrepid.danplanet.com
> > > Message-ID:
> > > <CAPpvvnmuo+xvZuLdgKGcc-BzOhLS+ch1CSPP+=
> > > 03ZG2RBaAqBg at mail.gmail.com>
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > Thanks Fred
> > >
> > > OK some more information.
> > >
> > > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> > >
> > > I have the RT Systems USB cable for the FT60-R and an aftermarket
> USB
> > > cable
> > > for the UV-5R.
> > >
> > > I have installed the drivers for both above cables and verified the
> > COM
> > > Port they are using. Both are COM4.
> > >
> > > I started CHIRP software, plugged in the RT Systems USB cable, held
> > > down
> > > the Moni key while turning on the FT60-R and the software responded
> > > with an
> > > error message stating:
> > >
> > > "An Error has occurred. Radio is not responding" with an OK button.
> > >
> > > Now I was told by a friend that the FT60-R has a problem conneting
> > for
> > > the
> > > 1st time, but it will be easier there after. But then what are the
> > > tricks
> > > that will make it easier to connect the first time?
> > >
> > > Thanks
> > >
> > > 73
> > >
> > > Wassim
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> > >
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/3e7ceb68/attachment-0001.html
> > >
> > > ------------------------------
> > >
> > > Message: 2
> > > Date: Wed, 12 Dec 2012 15:41:59 -0800
> > > From: Bob Nielsen <n7xy at clearwire.net>
> > > Subject: Re: [chirp_users] Ref: I need Help
> > > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > > Message-ID: <08EDC49F-60DD-4AEE-AD86-E38C0283327B at clearwire.net>
> > > Content-Type: text/plain; charset=iso-8859-1
> > >
> > > You may need to plug in the cable before starting CHIRP, so it
> picks
> > > the correct driver.
> > >
> > > Bob, N7XY
> > >
> > > On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <wn6wjn at gmail.com>
> > > wrote:
> > >
> > > > Thanks Fred
> > > >
> > > > OK some more information.
> > > >
> > > > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit
> machine.
> > > >
> > > > I have the RT Systems USB cable for the FT60-R and an aftermarket
> > > USB cable for the UV-5R.
> > > >
> > > > I have installed the drivers for both above cables and verified
> the
> > > COM Port they are using. Both are COM4.
> > > >
> > > > I started CHIRP software, plugged in the RT Systems USB cable,
> held
> > > down the Moni key while turning on the FT60-R and the
> > > software responded with an error message stating:
> > > >
> > > > "An Error has occurred. Radio is not responding" with an OK
> button.
> > > >
> > > > Now I was told by a friend that the FT60-R has a problem
> conneting
> > > for the 1st time, but it will be easier there after. But
> > > then what are the tricks that will make it easier to connect the first
> > > time?
> > > >
> > > > Thanks
> > > >
> > > > 73
> > > >
> > > > Wassim
> > > > _______________________________________________
> > > > chirp_users mailing list
> > > > chirp_users at intrepid.danplanet.com
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >
> > >
> > >
> > > _____
> > > Licensed since 1952
> > > ------------------------------
> > > Message: 3
> > > Date: Wed, 12 Dec 2012 19:17:18 -0500
> > > From: Bobby Goins <goins0497 at insightbb.com>
> > > Subject: Re: [chirp_users] Ref: I need Help
> > > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > > Message-ID: <
> > q62fty7w6ilhyd0n6vt0393n.1355356718821 at email.android.com>
> > > Content-Type: text/plain; charset=utf-8
> > >
> > > I unsuccessfully tried using a cheap aftermarket cord for my UV-5R+
> > on
> > > both Linux and Win7. I never could get the radio to
> > > communicate.
> > >
> > > I ended up purchasing a cord from Valley Enterprises (no relation
> > with
> > > the company) and it worked. (No driver was needed for
> > > Linux. I did need to download a driver for Win7.)
> > >
> > > I believe the cord was originally for a Kenwood KPG-22 radio.
> > > (Valley's part# RPC-K1-UF.)
> > > ---
> > > Now for something fun... get a female SMA to PL259 adapter, and run
> > > your Baofeng through a mobile antenna. You'll be happy!
> > > <grin>
> > >
> > >
> > >
> > >
> > > Bob Nielsen <n7xy at clearwire.net> wrote:
> > >
> > > >You may need to plug in the cable before starting CHIRP, so it
> picks
> > > the correct driver.
> > > >
> > > >Bob, N7XY
> > > >
> > > >On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <wn6wjn at gmail.com>
> > > wrote:
> > > >
> > > >> Thanks Fred
> > > >>
> > > >> OK some more information.
> > > >>
> > > >> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit
> machine.
> > > >>
> > > >> I have the RT Systems USB cable for the FT60-R and an
> aftermarket
> > > USB cable for the UV-5R.
> > > >>
> > > >> I have installed the drivers for both above cables and verified
> > the
> > > COM Port they are using. Both are COM4.
> > > >>
> > > >> I started CHIRP software, plugged in the RT Systems USB cable,
> > held
> > > down the Moni key while turning on the FT60-R and the
> > > software responded with an error message stating:
> > > >>
> > > >> "An Error has occurred. Radio is not responding" with an OK
> > button.
> > > >>
> > > >> Now I was told by a friend that the FT60-R has a problem
> conneting
> > > for the 1st time, but it will be easier there after. But
> > > then what are the tricks that will make it easier to connect the first
> > > time?
> > > >>
> > > >> Thanks
> > > >>
> > > >> 73
> > > >>
> > > >> Wassim
> > > >> _______________________________________________
> > > >> chirp_users mailing list
> > > >> chirp_users at intrepid.danplanet.com
> > > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > >
> > > >
> > > >
> > > >_____
> > > >Licensed since 1952
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >_______________________________________________
> > > >chirp_users mailing list
> > > >chirp_users at intrepid.danplanet.com
> > > >http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >
> > > ------------------------------
> > >
> > > Message: 4
> > > Date: Wed, 12 Dec 2012 19:28:17 -0500
> > > From: Jim Unroe <rock.unroe at gmail.com>
> > > Subject: Re: [chirp_users] Ref: I need Help
> > > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > > Message-ID:
> > > <CADnO8U4S=EOR_42NM4gxysKTWNHbzUMS0=
> > > v1kwePFwuNLsTgVA at mail.gmail.com>
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > V0.2.2 doesn't support the UV-5R. You need the latest daily build.
> > > Jim
> > > On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <wn6wjn at gmail.com>
> > wrote:
> > >
> > > > Thanks Fred
> > > >
> > > > OK some more information.
> > > >
> > > > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit
> machine.
> > > >
> > > > I have the RT Systems USB cable for the FT60-R and an aftermarket
> > USB
> > > > cable for the UV-5R.
> > > >
> > > > I have installed the drivers for both above cables and verified
> the
> > > COM
> > > > Port they are using. Both are COM4.
> > > >
> > > > I started CHIRP software, plugged in the RT Systems USB cable,
> held
> > > down
> > > > the Moni key while turning on the FT60-R and the software
> responded
> > > with an
> > > > error message stating:
> > > >
> > > > "An Error has occurred. Radio is not responding" with an OK
> button.
> > > >
> > > > Now I was told by a friend that the FT60-R has a problem
> conneting
> > > for the
> > > > 1st time, but it will be easier there after. But then what are
> the
> > > tricks
> > > > that will make it easier to connect the first time?
> > > >
> > > > Thanks
> > > >
> > > > 73
> > > >
> > > > Wassim
> > > >
> > > > _______________________________________________
> > > > chirp_users mailing list
> > > > chirp_users at intrepid.danplanet.com
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > >
> > > >
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> > >
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/f4be35aa/attachment-0001.html
> > >
> > > ------------------------------
> > >
> > > Message: 5
> > > Date: Wed, 12 Dec 2012 19:29:41 -0500
> > > From: Jim Unroe <rock.unroe at gmail.com>
> > > Subject: Re: [chirp_users] Ref: I need Help
> > > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > > Message-ID:
> > > <
> > > CADnO8U6DAYeSuRdVOUukZ8fdeF5aFQcLYrBOT_JyQXZWAW8NZQ at mail.gmail.com>
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > I meant to type v0.2.3. Sorry
> > > On Dec 12, 2012 7:28 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:
> > >
> > > > V0.2.2 doesn't support the UV-5R. You need the latest daily
> build.
> > > > Jim
> > > > On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <wn6wjn at gmail.com>
> > > wrote:
> > > >
> > > >> Thanks Fred
> > > >>
> > > >> OK some more information.
> > > >>
> > > >> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit
> machine.
> > > >>
> > > >> I have the RT Systems USB cable for the FT60-R and an
> aftermarket
> > > USB
> > > >> cable for the UV-5R.
> > > >>
> > > >> I have installed the drivers for both above cables and verified
> > the
> > > COM
> > > >> Port they are using. Both are COM4.
> > > >>
> > > >> I started CHIRP software, plugged in the RT Systems USB cable,
> > held
> > > down
> > > >> the Moni key while turning on the FT60-R and the software
> > responded
> > > with an
> > > >> error message stating:
> > > >>
> > > >> "An Error has occurred. Radio is not responding" with an OK
> > button.
> > > >>
> > > >> Now I was told by a friend that the FT60-R has a problem
> conneting
> > > for
> > > >> the 1st time, but it will be easier there after. But then what
> are
> > > the
> > > >> tricks that will make it easier to connect the first time?
> > > >>
> > > >> Thanks
> > > >>
> > > >> 73
> > > >>
> > > >> Wassim
> > > >>
> > > >> _______________________________________________
> > > >> chirp_users mailing list
> > > >> chirp_users at intrepid.danplanet.com
> > > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > >>
> > > >>
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> > >
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/45a7f130/attachment-0001.html
> > >
> > > ------------------------------
> > >
> > > Message: 6
> > > Date: Thu, 13 Dec 2012 10:02:17 +0100
> > > From: IZ3GME Marco <iz3gme.marco at gmail.com>
> > > Subject: Re: [chirp_users] Ref: I need Help
> > > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > > Message-ID: <50C99999.5080304 at gmail.com>
> > > Content-Type: text/plain; charset=windows-1252; format=flowed
> > >
> > > Hi Wassim
> > >
> > > My suspect is that you simply miss a step: after starting chirp
> > > download
> > > you should tell to the radio to start clone-tx (from FT60 userm
> > > manual):
> > >
> > > 4. Rotate the DIAL job on each radio to select to ?F8 CLONE,?
> > > then press the [F/W] key momentarily.
> > > 5. The display will disappear for a moment, then the ?CLONE?
> > > notation will appear on the displays of both radios when the
> > > Clone mode is successfully activated in this step.
> > > 6. (don't do this!!!) On the Destination radio, press the MONI
> switch
> > > (?--RX- -? will appear on the LCD).
> > > 7. Press the PTT switch on the Source radio; ?- -TX- -? will appear
> > > on the Source radio, and the data from this radio will be
> transferred
> > > to
> > > the other radio
> > >
> > > In a similar way when you'll have to "save" to FT60 you have to put
> > the
> > > radio in clone rx following the same procedure as above but doing
> > step
> > > 6
> > > and not step 7 before to start chirp upload.
> > >
> > > Hope this can help
> > >
> > > 73 de IZ3GME Marco
> > >
> > >
> > > On 13/12/2012 00:15, WN6WJN - - Wassim wrote:
> > > > Thanks Fred
> > > >
> > > > OK some more information.
> > > >
> > > > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit
> machine.
> > > >
> > > > I have the RT Systems USB cable for the FT60-R and an aftermarket
> > USB
> > > > cable for the UV-5R.
> > > >
> > > > I have installed the drivers for both above cables and verified
> the
> > > COM
> > > > Port they are using. Both are COM4.
> > > >
> > > > I started CHIRP software, plugged in the RT Systems USB cable,
> held
> > > down
> > > > the Moni key while turning on the FT60-R and the software
> responded
> > > with
> > > > an error message stating:
> > > >
> > > > "An Error has occurred. Radio is not responding" with an OK
> button.
> > > >
> > > > Now I was told by a friend that the FT60-R has a problem
> conneting
> > > for
> > > > the 1st time, but it will be easier there after. But then what
> are
> > > the
> > > > tricks that will make it easier to connect the first time?
> > > >
> > > > Thanks
> > > >
> > > > 73
> > > >
> > > > Wassim
> > > >
> > > >
> > > > _______________________________________________
> > > > chirp_users mailing list
> > > > chirp_users at intrepid.danplanet.com
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > >
> > >
> > >
> > >
> > > ------------------------------
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >
> > >
> > > End of chirp_users Digest, Vol 48, Issue 6
> > > ******************************************
> > >
> > >
> > >
> > >
> > >
> > >
> > > --
> > > Best wishess for you !!! ( :
> > >
> > > Yerushalmi Rafael
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------------
> > >
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> > >
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/a1133cb5/attachment.html
> > >
> > > ------------------------------
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >
> > >
> > > End of chirp_users Digest, Vol 48, Issue 8
> > > ******************************************
> > >
> > >
> > >
> > >
> > > --
> > > Best wishess for you !!! ( :
> > >
> > > Yerushalmi Rafael
> > >
> > >
> > >
> > >
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> > >
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/ee813b49/attachment.html
> > >
> > > ------------------------------
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >
> > >
> > > End of chirp_users Digest, Vol 48, Issue 10
> > > *******************************************
> > >
> >
> >
> >
> > --
> > Best wishess for you !!! ( :
> >
> > Yerushalmi Rafael
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/f93f9612/attachment.html
> >
> > ------------------------------
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> > End of chirp_users Digest, Vol 48, Issue 11
> > ***********************************************
> >
> >
> >
> > ****
> >
> > ** **
> >
> > --
> > Best wishess for you !!! ( :
> >
> > Yerushalmi Rafael
> >
> >
> > ****
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/d19254fe/attachment.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 48, Issue 14
> *******************************************
>
--
Best wishess for you !!! ( :
Yerushalmi Rafael
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/31487596/attachment.html
More information about the chirp_users
mailing list