[chirp_users] chirp_users Digest, Vol 48, Issue 11
John LaMartina
Sun Dec 16 09:28:07 PST 2012
The fact that you have no loop back would indicate no physical connection to the board.
This would point to a bad cable.
Anyone else have thoughts on this?
John K3NXU
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Rafael Yerushalmi
Sent: Sunday, December 16, 2012 11:36 AM
To: chirp_users at intrepid.danplanet.com
Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11
Hello again...
I run the sw` for finding the port & got the
messege :"com3 this port appears to be a cable without echo loopback ".
what does it main ?
thanks
On Sun, Dec 16, 2012 at 6:29 PM, <chirp_users-request at intrepid.danplanet.com> wrote:
Send chirp_users mailing list submissions to
chirp_users at intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
chirp_users-request at intrepid.danplanet.com
You can reach the person managing the list at
chirp_users-owner at intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."
Today's Topics:
1. Re: chirp_users Digest, Vol 48, Issue 10 (Rafael Yerushalmi)
----------------------------------------------------------------------
Message: 1
Date: Sun, 16 Dec 2012 18:29:05 +0200
From: Rafael Yerushalmi <rafaely10 at gmail.com>
Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 10
To: chirp_users at intrepid.danplanet.com
Message-ID:
<CALiBrY6mzeR=nWWAPKTaQp4=VxpNWLToo25V3Uc9Coz3kcz7YA at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hello there.
I upload again the driver 3.2.0.0 for the usb port com3 & also
give slight trimming of the cable plug side .
but the same messege.
thanks
On Sun, Dec 16, 2012 at 3:46 PM, <chirp_users-request at intrepid.danplanet.com
> wrote:
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Re: chirp_users Digest, Vol 48, Issue 8 (John LaMartina)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 16 Dec 2012 08:45:53 -0500
> From: "John LaMartina" <JohnLa at usa.net>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> Message-ID: <000f01cddb93$ab59d8c0$020d8a40$@net>
> Content-Type: text/plain; charset="us-ascii"
>
> If the cable is okay. the next step would be the driver.
>
> You mentioned using 3.2.0.0 which is correct for Windows 7. (XP
> automatically runs the correct driver)
>
>
>
> However, if you now plug the cable into a different USB port, Windows will
> load the NEW driver for that port, not 3.2.0.0
>
> Below you mention com6 and com3 so it appears you are moving the cable
> from USB to USB.
>
> You will need to return to the original USB port or reload 3.2.0.0 to the
> new one.
>
>
>
> Check out the FAQ section at the bottom of this link.
>
> http://www.miklor.com/uv5r/UV5R-Drivers.html
>
>
>
> Let us know if this helps.
>
> John K3NXU
>
>
>
>
>
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Rafael Yerushalmi
> Sent: Sunday, December 16, 2012 1:04 AM
> To: chirp_users at intrepid.danplanet.com
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8
>
>
>
> Good morning ...
>
>
>
> 1- On the xp when its works (before the virus )the cable was ok, so the
>
> cable issue is ok( i think ).
>
> 2- I opend a two different com ( com3/com6 ) but the same result.
>
>
>
> Thanks
>
>
>
> On Sat, Dec 15, 2012 at 9:10 PM, <
> chirp_users-request at intrepid.danplanet.com> wrote:
>
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Re: chirp_users Digest, Vol 48, Issue 6 (John LaMartina)
> 2. Re: chirp_users Digest, Vol 48, Issue 6 (william coulson)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 15 Dec 2012 11:44:16 -0500
> From: "John LaMartina" <JohnLa at usa.net>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> Message-ID: <000601cddae3$6c632280$45296780$@net>
> Content-Type: text/plain; charset="us-ascii"
>
> The error message indicates that your cable is not plugged in all the way.
> A common problem as Baofeng doesn't manufacture their own cables.
> See: http://www.miklor.com/uv5r/UV5R-ErrorMess.html
>
> If you haven't already, check out the UV5R User's Guide
> http://www.miklor.com/uv5r/UserGuide
>
> Enjoy your new Toy...
> John K3NXU
>
>
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Rafael Yerushalmi
> Sent: Saturday, December 15, 2012 10:38 AM
> To: chirp_users at intrepid.danplanet.com
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6
>
> Hello there.
>
> I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0
> on win 7 becuse my computer have been with a virus but notning working with
> the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow sigh .
> when I operate chirp after a few seconds the message is " Radio did not
> respond "
> on xp it was working good ...
> what is the setting for the com is it 1200 baud ? is it xon/xoff ?
>
> Need your help
>
> best 73
> Thanks
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/6efb8f37/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Sat, 15 Dec 2012 11:09:44 -0800
> From: "william coulson" <wcoulson730 at gmail.com>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6
> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
> Message-ID: <E5B1B60E83F0447E8CA3F4C068554DA1 at williamcoulsPC>
> Content-Type: text/plain; charset="iso-8859-1"
>
> try a different COM PORT
>
> Bill
> ----- Original Message -----
> From: Rafael Yerushalmi
> To: chirp_users at intrepid.danplanet.com
> Sent: Saturday, December 15, 2012 7:38 AM
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6
>
>
> Hello there.
>
>
> I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0
> on win 7 becuse my computer have been with a virus but notning working
> with
> the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow sigh .
> when i operte chrip after a few ceconds the messege is " Radio did not
> respond "
> on xp it was working good ...
> what is the setting for the com is it 1200 baud ? is it xon/xoff ?
> need your help
>
> best 73
> Thanks
>
>
>
> On Thu, Dec 13, 2012 at 10:00 PM, <
> chirp_users-request at intrepid.danplanet.com> wrote:
>
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Ref: I need Help (WN6WJN - - Wassim)
> 2. Re: Ref: I need Help (Bob Nielsen)
> 3. Re: Ref: I need Help (Bobby Goins)
> 4. Re: Ref: I need Help (Jim Unroe)
> 5. Re: Ref: I need Help (Jim Unroe)
> 6. Re: Ref: I need Help (IZ3GME Marco)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 12 Dec 2012 15:15:00 -0800
> From: WN6WJN - - Wassim <wn6wjn at gmail.com>
> Subject: [chirp_users] Ref: I need Help
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
> <CAPpvvnmuo+xvZuLdgKGcc-BzOhLS+ch1CSPP+=
> 03ZG2RBaAqBg at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Thanks Fred
>
> OK some more information.
>
> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
>
> I have the RT Systems USB cable for the FT60-R and an aftermarket USB
> cable
> for the UV-5R.
>
> I have installed the drivers for both above cables and verified the COM
> Port they are using. Both are COM4.
>
> I started CHIRP software, plugged in the RT Systems USB cable, held
> down
> the Moni key while turning on the FT60-R and the software responded
> with an
> error message stating:
>
> "An Error has occurred. Radio is not responding" with an OK button.
>
> Now I was told by a friend that the FT60-R has a problem conneting for
> the
> 1st time, but it will be easier there after. But then what are the
> tricks
> that will make it easier to connect the first time?
>
> Thanks
>
> 73
>
> Wassim
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/3e7ceb68/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Wed, 12 Dec 2012 15:41:59 -0800
> From: Bob Nielsen <n7xy at clearwire.net>
> Subject: Re: [chirp_users] Ref: I need Help
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <08EDC49F-60DD-4AEE-AD86-E38C0283327B at clearwire.net>
> Content-Type: text/plain; charset=iso-8859-1
>
> You may need to plug in the cable before starting CHIRP, so it picks
> the correct driver.
>
> Bob, N7XY
>
> On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <wn6wjn at gmail.com>
> wrote:
>
> > Thanks Fred
> >
> > OK some more information.
> >
> > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> >
> > I have the RT Systems USB cable for the FT60-R and an aftermarket
> USB cable for the UV-5R.
> >
> > I have installed the drivers for both above cables and verified the
> COM Port they are using. Both are COM4.
> >
> > I started CHIRP software, plugged in the RT Systems USB cable, held
> down the Moni key while turning on the FT60-R and the
> software responded with an error message stating:
> >
> > "An Error has occurred. Radio is not responding" with an OK button.
> >
> > Now I was told by a friend that the FT60-R has a problem conneting
> for the 1st time, but it will be easier there after. But
> then what are the tricks that will make it easier to connect the first
> time?
> >
> > Thanks
> >
> > 73
> >
> > Wassim
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
> _____
> Licensed since 1952
> ------------------------------
> Message: 3
> Date: Wed, 12 Dec 2012 19:17:18 -0500
> From: Bobby Goins <goins0497 at insightbb.com>
> Subject: Re: [chirp_users] Ref: I need Help
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <q62fty7w6ilhyd0n6vt0393n.1355356718821 at email.android.com>
> Content-Type: text/plain; charset=utf-8
>
> I unsuccessfully tried using a cheap aftermarket cord for my UV-5R+ on
> both Linux and Win7. I never could get the radio to
> communicate.
>
> I ended up purchasing a cord from Valley Enterprises (no relation with
> the company) and it worked. (No driver was needed for
> Linux. I did need to download a driver for Win7.)
>
> I believe the cord was originally for a Kenwood KPG-22 radio.
> (Valley's part# RPC-K1-UF.)
> ---
> Now for something fun... get a female SMA to PL259 adapter, and run
> your Baofeng through a mobile antenna. You'll be happy!
> <grin>
>
>
>
>
> Bob Nielsen <n7xy at clearwire.net> wrote:
>
> >You may need to plug in the cable before starting CHIRP, so it picks
> the correct driver.
> >
> >Bob, N7XY
> >
> >On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <wn6wjn at gmail.com>
> wrote:
> >
> >> Thanks Fred
> >>
> >> OK some more information.
> >>
> >> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> >>
> >> I have the RT Systems USB cable for the FT60-R and an aftermarket
> USB cable for the UV-5R.
> >>
> >> I have installed the drivers for both above cables and verified the
> COM Port they are using. Both are COM4.
> >>
> >> I started CHIRP software, plugged in the RT Systems USB cable, held
> down the Moni key while turning on the FT60-R and the
> software responded with an error message stating:
> >>
> >> "An Error has occurred. Radio is not responding" with an OK button.
> >>
> >> Now I was told by a friend that the FT60-R has a problem conneting
> for the 1st time, but it will be easier there after. But
> then what are the tricks that will make it easier to connect the first
> time?
> >>
> >> Thanks
> >>
> >> 73
> >>
> >> Wassim
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> >
> >_____
> >Licensed since 1952
> >
> >
> >
> >
> >
> >
> >
> >_______________________________________________
> >chirp_users mailing list
> >chirp_users at intrepid.danplanet.com
> >http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> ------------------------------
>
> Message: 4
> Date: Wed, 12 Dec 2012 19:28:17 -0500
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Ref: I need Help
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CADnO8U4S=EOR_42NM4gxysKTWNHbzUMS0=
> v1kwePFwuNLsTgVA at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> V0.2.2 doesn't support the UV-5R. You need the latest daily build.
> Jim
> On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <wn6wjn at gmail.com> wrote:
>
> > Thanks Fred
> >
> > OK some more information.
> >
> > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> >
> > I have the RT Systems USB cable for the FT60-R and an aftermarket USB
> > cable for the UV-5R.
> >
> > I have installed the drivers for both above cables and verified the
> COM
> > Port they are using. Both are COM4.
> >
> > I started CHIRP software, plugged in the RT Systems USB cable, held
> down
> > the Moni key while turning on the FT60-R and the software responded
> with an
> > error message stating:
> >
> > "An Error has occurred. Radio is not responding" with an OK button.
> >
> > Now I was told by a friend that the FT60-R has a problem conneting
> for the
> > 1st time, but it will be easier there after. But then what are the
> tricks
> > that will make it easier to connect the first time?
> >
> > Thanks
> >
> > 73
> >
> > Wassim
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/f4be35aa/attachment-0001.html
>
> ------------------------------
>
> Message: 5
> Date: Wed, 12 Dec 2012 19:29:41 -0500
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Ref: I need Help
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <
> CADnO8U6DAYeSuRdVOUukZ8fdeF5aFQcLYrBOT_JyQXZWAW8NZQ at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I meant to type v0.2.3. Sorry
> On Dec 12, 2012 7:28 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:
>
> > V0.2.2 doesn't support the UV-5R. You need the latest daily build.
> > Jim
> > On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <wn6wjn at gmail.com>
> wrote:
> >
> >> Thanks Fred
> >>
> >> OK some more information.
> >>
> >> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> >>
> >> I have the RT Systems USB cable for the FT60-R and an aftermarket
> USB
> >> cable for the UV-5R.
> >>
> >> I have installed the drivers for both above cables and verified the
> COM
> >> Port they are using. Both are COM4.
> >>
> >> I started CHIRP software, plugged in the RT Systems USB cable, held
> down
> >> the Moni key while turning on the FT60-R and the software responded
> with an
> >> error message stating:
> >>
> >> "An Error has occurred. Radio is not responding" with an OK button.
> >>
> >> Now I was told by a friend that the FT60-R has a problem conneting
> for
> >> the 1st time, but it will be easier there after. But then what are
> the
> >> tricks that will make it easier to connect the first time?
> >>
> >> Thanks
> >>
> >> 73
> >>
> >> Wassim
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>
> >>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/45a7f130/attachment-0001.html
>
> ------------------------------
>
> Message: 6
> Date: Thu, 13 Dec 2012 10:02:17 +0100
> From: IZ3GME Marco <iz3gme.marco at gmail.com>
> Subject: Re: [chirp_users] Ref: I need Help
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <50C99999.5080304 at gmail.com>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> Hi Wassim
>
> My suspect is that you simply miss a step: after starting chirp
> download
> you should tell to the radio to start clone-tx (from FT60 userm
> manual):
>
> 4. Rotate the DIAL job on each radio to select to ?F8 CLONE,?
> then press the [F/W] key momentarily.
> 5. The display will disappear for a moment, then the ?CLONE?
> notation will appear on the displays of both radios when the
> Clone mode is successfully activated in this step.
> 6. (don't do this!!!) On the Destination radio, press the MONI switch
> (?--RX- -? will appear on the LCD).
> 7. Press the PTT switch on the Source radio; ?- -TX- -? will appear
> on the Source radio, and the data from this radio will be transferred
> to
> the other radio
>
> In a similar way when you'll have to "save" to FT60 you have to put the
> radio in clone rx following the same procedure as above but doing step
> 6
> and not step 7 before to start chirp upload.
>
> Hope this can help
>
> 73 de IZ3GME Marco
>
>
> On 13/12/2012 00:15, WN6WJN - - Wassim wrote:
> > Thanks Fred
> >
> > OK some more information.
> >
> > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> >
> > I have the RT Systems USB cable for the FT60-R and an aftermarket USB
> > cable for the UV-5R.
> >
> > I have installed the drivers for both above cables and verified the
> COM
> > Port they are using. Both are COM4.
> >
> > I started CHIRP software, plugged in the RT Systems USB cable, held
> down
> > the Moni key while turning on the FT60-R and the software responded
> with
> > an error message stating:
> >
> > "An Error has occurred. Radio is not responding" with an OK button.
> >
> > Now I was told by a friend that the FT60-R has a problem conneting
> for
> > the 1st time, but it will be easier there after. But then what are
> the
> > tricks that will make it easier to connect the first time?
> >
> > Thanks
> >
> > 73
> >
> > Wassim
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
>
>
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 48, Issue 6
> ******************************************
>
>
>
>
>
>
> --
> Best wishess for you !!! ( :
>
> Yerushalmi Rafael
>
>
>
>
>
>
>
> ------------------------------------------------------------------------------
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/a1133cb5/attachment.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 48, Issue 8
> ******************************************
>
>
>
>
> --
> Best wishess for you !!! ( :
>
> Yerushalmi Rafael
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/ee813b49/attachment.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 48, Issue 10
> *******************************************
>
--
Best wishess for you !!! ( :
Yerushalmi Rafael
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/f93f9612/attachment.html
------------------------------
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
End of chirp_users Digest, Vol 48, Issue 11
*******************************************
--
Best wishess for you !!! ( :
Yerushalmi Rafael
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/7386767f/attachment.html
More information about the chirp_users
mailing list