[chirp_users] New Install with OSX Lion

Craig Ludwig craiglud at me.com
Sat Nov 5 03:17:30 PDT 2011


ok, it must be a bad cable. I received a new kawamall cable for my vx7r and it works just fine downloading from the radio. I will now order a new cable for the 8800 and go from there! 

Thanks for your work on this! Now i can stop running windows on my mac. That was the last bit of software i needed to have available on my mac.


Craig

On Nov 1, 2011, at 4:48 PM, Dan Smith wrote:

>> When I have the kawamall device plugged in this is the one shows up
>> in the list, if I unplug the device this one is no longer available.
> 
> Okay, I'd still like to see the debug log.
> 
> Here's something you can try, to rule out issues with the cable, 
> adapter, radio, and driver:
> 
> Find a terminal program and connect it to your /dev/cu.usbserial device, 
> at 9600 baud. Then initiate your clone from the radio side and see if 
> you see the model header show up in the terminal. For the FT-8800, this 
> should be "AH018". If you see it, then we can start looking at CHIRP. If 
> you don't then you should start looking at the above-mentioned links in 
> the chain.
> 
> Thanks!
> 
> -- 
> Dan Smith
> www.danplanet.com
> KK7DS
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users




More information about the chirp_users mailing list