[chirp_users] New Install with OSX Lion

Craig Ludwig craiglud at me.com
Tue Nov 1 13:59:08 PDT 2011


The device selected is '/dev/cu.usbserial'

When I have the kawamall device plugged in this is the one shows up in the list, if I unplug the device this one is no longer available. 


Craig
craig at iludwig.com

On Nov 1, 2011, at 10:55 AM, Dan Smith <dsmith at danplanet.com> wrote:

>> E. select the select the 'usbserial' device from the list
> 
> Can you tell me exactly which device is selected?
> 
>> About one second goes by then I get error on radio and error reported in chirp.
> 
> The rest of the procedure sounds correct (thanks for the detail). It 
> really sounds like the wrong device is being opened and CHIRP reads 
> nothing (and fails) and the radio gets no ACK (and fails).
> 
> Can you send me the debug.log after reproducing the fail just so I can 
> see if there's anything else there?
> 
> I have neither a Mac nor an FT-8800, although I do know that the 8800 
> driver is actively used and my 7800 (which is the same driver) seems to 
> be fine.
> 
> What kind of cable is this? It's not a recent RTSystems cable is it?
> 
> -- 
> Dan Smith
> www.danplanet.com
> KK7DS
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users




More information about the chirp_users mailing list