[chirp_users] [CHIRP] #89: Not all frequencies showing

[Dan Smith]

> The bad news is (and I verified by rolling it back to see if this
> existed with the previous version) is when it reads memory channel 12,
> it is displaying a slight difference in the actual setting.

So the older build shows the proper frequency and the new one does not? 
  That runs contrary to some of my testing, but I also have done some 
work on the functions that detect 12.5 and 6.25 step frequencies 
recently, so maybe something has changed.

If you could file another bug for this issue, I'd appreciate it.  I'll 
take a look.

> Another issue that is exhibited is, if a write the 800MHz frequency to
> the channel via the radio key pad, it is masked by VFO B as it isn't a
> supported channel. If I use the SW to write a 800MHz frequency then,
> even though it isn't supported by VFO B, it shows up when moving through
> the VFO B memory channels.
> Also, if I read the memory with the SW. Then write in a new frequency on
> a new memory channel, then write it to the radio, the previously masked
> frequencies stay masked.
> If a change is made to an already existing memory channel, it becomes
> unmasked to VFO B even if it is in that 800MHZ range.

Ah, okay, I know why that is.  If you can file a bug for this one too 
(just to keep things organized) I'll get this resolved.

Thanks!

-- 
Dan Smith
www.danplanet.com
KK7DS