[chirp_users] CHIRP 0.1.8

Dan Smith dsmith at danplanet.com
Fri Feb 6 12:15:22 PST 2009


Hi Dave,

> I realise that you are currently working on a 0.1.9beta at the
> moment, but I've come across a couple of small problems with the
> release version of 0.1.8 which I don't think have been identified or
> addressed in the recent change logs.
> 
> When importing a CSV file into an IC-2820 with CHIRP all looks fine,
> however if you then open it up with the CS-2820 program some, not
> all, of the DSQL fields display "error" and the CODE field displays
> "127" instead of "00".  This is occuring on some DV memory channels,
> but fairly consistently.  I cleaned up a ICF file, then went through
> the process a couple of times importing a CSV file through CHIRP and
> it happened on each occasion.
> 
> I can't replicate the problem on my IC-92AD, so it may only be
> isolated to the IC-2820H.
> 
> Unfortunately I'm not in a position to send you a dodgy icf file or
> chirp csv file at the moment.
> 
> On a secondary issue, I discovered yesterday when importing a CSV
> file into the IC-92AD, with CHIRP 0.1.8, that if a frequency is out
> of range (example: 136.6375, instead of 146.6375) then CHIRP locked
> up and had to be killed / restarted.

Just so you don't think you're being ignored, this is in my pipeline to
look at.  There are just a lot of things there already :)

Thanks!

-- 
Dan Smith
dsmith#danplanet.com, s/#/@/
www.danplanet.com
KK7DS




More information about the chirp_users mailing list