# HG changeset patch # User Jens Jensen # Date 1378921402 18000 # Wed Sep 11 12:43:22 2013 -0500 # Node ID e242397a4c489a2515c6c38682ccfdd5766fce91 # Parent c60b1cdee0f0549b7c1ae56507b3738778fc5b5d adding settings and banks support for VX-2. #833 diff -r c60b1cdee0f0 -r e242397a4c48 chirp/vx2.py --- a/chirp/vx2.py Mon Sep 09 14:06:23 2013 -0700 +++ b/chirp/vx2.py Wed Sep 11 12:43:22 2013 -0500 @@ -14,19 +14,100 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . -from chirp import chirp_common, yaesu_clone, directory -from chirp import bitwise +from chirp import chirp_common, yaesu_clone, directory, bitwise +from chirp.settings import RadioSetting, RadioSettingGroup, \ + RadioSettingValueInteger, RadioSettingValueList, \ + RadioSettingValueBoolean, RadioSettingValueString +import os, traceback, re + +if os.getenv("CHIRP_DEBUG"): + CHIRP_DEBUG = True +else: + CHIRP_DEBUG = False MEM_FORMAT = """ #seekto 0x7F52; u8 checksum; +#seekto 0x005A; +u8 banksoff1; +#seekto 0x00DA; +u8 banksoff2; + +#seekto 0x0068; +u16 prioritychan; + +#seekto 0x110; +struct { + u8 unk1; + u8 unk2; + u8 nfm_sql; + u8 wfm_sql; + u8 rfsql; + u8 vfomode:1, + cwid_en:1, + scan_lamp:1, + unk3:1, + ars:1, + beep:1, + split:1, + dtmfmode:1; + u8 busyled:1, + unk4:2, + bclo:1, + edgebeep:1, + unk5:2, + txsave:1; + u8 unk6:2, + smartsearch:1, + unk7:1, + artsinterval:1, + unk8:1, + hmrv:1, + moni_tcall:1; + u8 unk9:5, + dcsrev:1, + unk10:1, + mwmode:1; + u8 internet_mode:1, + internet_key:1, + wx_alert:1, + unk11:2, + att:1, + unk12:2; + u8 lamp; + u8 dimmer; + u8 rxsave; + u8 resume; + u8 chcounter; + u8 openmsgmode; + u8 openmsg[6]; + u8 cwid[6]; + u8 unk13[26]; + u8 artsbeep; + u8 bell; + u8 apo; + u8 tot; + u8 lock; + u8 mymenu; + u8 unk14[4]; + u8 emergmode; + +} settings; + +#seekto 0x0192; +struct { + u8 digits[16]; +} dtmf[9]; + #seekto 0x016A; -u16 bank_use[20]; +struct { + u16 in_use; +} bank_used[20]; #seekto 0x05C2; struct { - u16 channel[100]; + u16 channels[100]; } banks[20]; #seekto 0x1562; @@ -41,8 +122,7 @@ odd_masked:1; } flags[500]; -#seekto 0x17C2; -struct { +struct mem_struct { u8 unknown1:2, txnarrow:1, clk:1, @@ -61,8 +141,15 @@ u8 unknown5:1, dcs:7; u8 unknown6; +}; -} memory[1000]; +#seekto 0x17C2; +struct mem_struct memory[1000]; +struct { + struct mem_struct lower; + struct mem_struct upper; +} pms[50]; + """ VX2_DUPLEX = ["", "-", "+", "split"] @@ -77,32 +164,90 @@ ("\x00" * 13) + "*" + "\x00\x00,'|\x00\x00\x00\x00" + \ ("\x00" * 64)) +DTMFCHARSET = list("0123456789ABCD*#") + POWER_LEVELS = [chirp_common.PowerLevel("High", watts=1.50), chirp_common.PowerLevel("Low", watts=0.10)] -class VX2Bank(chirp_common.Bank): - """A VX2 Bank""" - def get_name(self): - _bank = self._model._radio._memobj.banks[self.index] - name = "bank_" + str(self.index + 1) - return name +class VX2BankModel(chirp_common.BankModel): + """A VX-2 bank model""" -class VX2BankModel(chirp_common.MTOBankModel): - """A VX-2 bank model""" def get_num_mappings(self): - return len(self._radio._memobj.banks) + return len(self.get_mappings()) def get_mappings(self): - _banks = self._radio._memobj.banks + banks = self._radio._memobj.banks + bank_mappings = [] + for index, _bank in enumerate(banks): + bank = chirp_common.Bank(self, "%i" % index, "b%i" % (index + 1)) + bank.index = index + bank_mappings.append(bank) + + return bank_mappings + + def _get_channel_numbers_in_bank(self, bank): + _bank_used = self._radio._memobj.bank_used[bank.index] + if _bank_used.in_use == 0xFFFF: + return set() + + _members = self._radio._memobj.banks[bank.index] + return set([int(ch) + 1 for ch in _members.channels if ch != 0xFFFF]) + + def _update_bank_with_channel_numbers(self, bank, channels_in_bank): + _members = self._radio._memobj.banks[bank.index] + if len(channels_in_bank) > len(_members.channels): + raise Exception("Too many entries in bank %d" % bank.index) + + empty = 0 + for index, channel_number in enumerate(sorted(channels_in_bank)): + _members.channels[index] = channel_number - 1 + empty = index + 1 + for index in range(empty, len(_members.channels)): + _members.channels[index] = 0xFFFF + + def add_memory_to_mapping(self, memory, bank): + channels_in_bank = self._get_channel_numbers_in_bank(bank) + channels_in_bank.add(memory.number) + self._update_bank_with_channel_numbers(bank, channels_in_bank) + + _bank_used = self._radio._memobj.bank_used[bank.index] + _bank_used.in_use = 0x0000 + + # also needed for unit to recognize banks? + self._radio._memobj.banksoff1 = 0x00 + self._radio._memobj.banksoff2 = 0x00 + # todo: turn back off (0xFF) when all banks are empty? + + def remove_memory_from_mapping(self, memory, bank): + channels_in_bank = self._get_channel_numbers_in_bank(bank) + try: + channels_in_bank.remove(memory.number) + except KeyError: + raise Exception("Memory %i is not in bank %s. Cannot remove" % \ + (memory.number, bank)) + self._update_bank_with_channel_numbers(bank, channels_in_bank) + + if not channels_in_bank: + _bank_used = self._radio._memobj.bank_used[bank.index] + _bank_used.in_use = 0xFFFF + + def get_mapping_memories(self, bank): + memories = [] + for channel in self._get_channel_numbers_in_bank(bank): + memories.append(self._radio.get_memory(channel)) + + return memories + + def get_memory_mappings(self, memory): banks = [] - for i in range(0, self.get_num_mappings()): - bank = VX2Bank(self, "%i" % i, "Bank-%i" % i) - bank.index = i - banks.append(bank) + for bank in self.get_mappings(): + if memory.number in self._get_channel_numbers_in_bank(bank): + banks.append(bank) + return banks + def _wipe_memory(mem): - # TODO: implement memory wipe? mem.set_raw("\x00" * (mem.size() / 8)) @directory.register @@ -116,7 +261,8 @@ def get_features(self): rf = chirp_common.RadioFeatures() - rf.has_bank = False # TODO: add bank support + rf.has_bank = True + rf.has_settings = True rf.has_dtcs_polarity = False rf.valid_modes = list(set(VX2_MODES)) rf.valid_tmodes = list(VX2_TMODES) @@ -246,4 +392,287 @@ def get_bank_model(self): return VX2BankModel(self) + def _decode_chars(self, inarr): + if CHIRP_DEBUG: + print "@_decode_chars, type: %s" % type(inarr) + print inarr + outstr = "" + for i in inarr: + if i == 0xFF: + break + outstr += CHARSET[i & 0x7F] + return outstr.rstrip() + + def _encode_chars(self, instr, length = 6): + if CHIRP_DEBUG: + print "@_encode_chars, type: %s" % type(instr) + print instr + outarr = [] + instr = str(instr) + for i in range(0, length): + if i < len(instr): + outarr.append(CHARSET.index(instr[i])) + else: + outarr.append(0xFF) + return outarr + + def get_settings(self): + _settings = self._memobj.settings + basic = RadioSettingGroup("basic", "Basic") + dtmf = RadioSettingGroup("dtmf", "DTMF") + arts = RadioSettingGroup("arts", "ARTS") + top = RadioSettingGroup("top", "All Settings", basic, arts, dtmf) + options = [ "off", "30m", "1h", "3h", "5h", "8h" ] + rs = RadioSetting("apo", "APO time (hrs)", + RadioSettingValueList(options, + options[_settings.apo])) + basic.append(rs) + + rs = RadioSetting("ars", "Auto Repeater Shift", + RadioSettingValueBoolean(_settings.ars)) + basic.append(rs) + + rs = RadioSetting("att", "Attenuation", + RadioSettingValueBoolean(_settings.att)) + basic.append(rs) + + rs = RadioSetting("bclo", "Busy Channel Lockout", + RadioSettingValueBoolean(_settings.bclo)) + basic.append(rs) + + rs = RadioSetting("beep", "Beep", + RadioSettingValueBoolean(_settings.beep)) + basic.append(rs) + + options = [ "off", "1", "3", "5", "8", "cont"] + rs = RadioSetting("bell", "Bell", + RadioSettingValueList(options, + options[_settings.bell])) + basic.append(rs) + + rs = RadioSetting("busyled", "Busy LED", + RadioSettingValueBoolean(_settings.busyled)) + basic.append(rs) + + options = [ "5", "10", "50", "100" ] + rs = RadioSetting("chcounter", "Channel Counter (MHz)", + RadioSettingValueList(options, + options[_settings.chcounter])) + basic.append(rs) + + rs = RadioSetting("dcsrev", "DCS Reverse", + RadioSettingValueBoolean(_settings.dcsrev)) + basic.append(rs) + + options = map(str, range(0,12+1)) + rs = RadioSetting("dimmer", "Dimmer", + RadioSettingValueList(options, options[_settings.dimmer])) + basic.append(rs) + + rs = RadioSetting("edgebeep", "Edge Beep", + RadioSettingValueBoolean(_settings.edgebeep)) + basic.append(rs) + + options = [ "beep", "strobe", "bp+str", "beam", "bp+beam", "cw", "bp+cw" ] + rs = RadioSetting("emergmode", "Emergency Mode", + RadioSettingValueList(options, + options[_settings.emergmode])) + basic.append(rs) + + options = ["Home", "Reverse"] + rs = RadioSetting("hmrv", "HM/RV key", + RadioSettingValueList(options, options[_settings.hmrv])) + basic.append(rs) + + options = ["My Menu", "Internet"] + rs = RadioSetting("internet_key", "Internet key", + RadioSettingValueList(options, options[_settings.internet_key])) + basic.append(rs) + + options = ["1 APO","2 AR BEP","3 AR INT","4 ARS","5 ATT","6 BCLO","7 BEEP","8 BELL", + "9 BSYLED","10 CH CNT","11 CK SFT","12 CW ID","13 DC VLT","14 DCS CD","15 DCS RV", + "16 DIMMER","17 DTMF","18 DTMF S","19 EDG BP","20 EMG S","21 HLFDEV","22 HM/RV", + "23 INT MD","24 LAMP","25 LOCK","26 M/T-CL","27 MW MD","28 NAME","29 NM SET", + "30 OPNMSG","31 RESUME","32 RF SQL","33 RPT","34 RX MD","35 RXSAVE","36 S SCH", + "37 SCNLMP","38 SHIFT","39 SKIP","40 SPLIT","41 SQL","42 SQL TYP","43 STEP", + "44 TN FRQ","45 TOT","46 TXSAVE","47 VFO MD","48 WX ALT"] + + rs = RadioSetting("mymenu", "My Menu function", + RadioSettingValueList(options, options[_settings.mymenu])) + basic.append(rs) + + options = ["wires", "link"] + rs = RadioSetting("internet_mode", "Internet mode", + RadioSettingValueList(options, options[_settings.internet_mode])) + basic.append(rs) + + options = ["key", "cont", "off"] + rs = RadioSetting("lamp", "Lamp mode", + RadioSettingValueList(options, options[_settings.lamp])) + basic.append(rs) + + options = ["key", "dial", "key+dial", "ptt", "key+ptt", "dial+ptt", "all"] + rs = RadioSetting("lock", "Lock mode", + RadioSettingValueList(options, options[_settings.lock])) + basic.append(rs) + + options = ["monitor", "tone call"] + rs = RadioSetting("moni_tcall", "MONI key", + RadioSettingValueList(options, options[_settings.moni_tcall])) + basic.append(rs) + + options = ["lower", "next"] + rs = RadioSetting("mwmode", "Memory write mode", + RadioSettingValueList(options, options[_settings.mwmode])) + basic.append(rs) + + options = map(str, range(0,15+1)) + rs = RadioSetting("nfm_sql", "NFM Sql", + RadioSettingValueList(options, options[_settings.nfm_sql])) + basic.append(rs) + + options = map(str, range(0,8+1)) + rs = RadioSetting("wfm_sql", "WFM Sql", + RadioSettingValueList(options, options[_settings.wfm_sql])) + basic.append(rs) + + options = ["off", "dc", "msg"] + rs = RadioSetting("openmsgmode", "Opening message", + RadioSettingValueList(options, options[_settings.openmsgmode])) + basic.append(rs) + + #todo handle opening message + + #todo: handle priority channel field + + options = ["3s","5s","10s","busy","hold"] + rs = RadioSetting("resume", "Resume", + RadioSettingValueList(options, options[_settings.resume])) + basic.append(rs) + + options = ["off"] + map(str,range(1,9+1)) + rs = RadioSetting("rfsql", "RF Sql", + RadioSettingValueList(options,options[_settings.rfsql])) + basic.append(rs) + + options = ["off","200ms","300ms","500ms","1s","2s"] + rs = RadioSetting("rxsave", "RX pwr save", + RadioSettingValueList(options, options[_settings.rxsave])) + basic.append(rs) + + options = ["single","cont"] + rs = RadioSetting("smartsearch", "Smart search", + RadioSettingValueList(options, options[_settings.smartsearch])) + basic.append(rs) + + rs = RadioSetting("scan_lamp", "Scan lamp", + RadioSettingValueBoolean(_settings.scan_lamp)) + basic.append(rs) + + rs = RadioSetting("split", "Split", + RadioSettingValueBoolean(_settings.split)) + basic.append(rs) + + options = ["off","1","3","5","10"] + rs = RadioSetting("tot", "TOT (mins)", + RadioSettingValueList(options, options[_settings.tot])) + basic.append(rs) + + rs = RadioSetting("txsave", "TX pwr save", + RadioSettingValueBoolean(_settings.txsave)) + basic.append(rs) + + options = ["all", "band"] + rs = RadioSetting("vfomode", "VFO mode", + RadioSettingValueList(options, options[_settings.vfomode])) + basic.append(rs) + + rs = RadioSetting("wx_alert", "WX Alert", + RadioSettingValueBoolean(_settings.wx_alert)) + basic.append(rs) + + + #todo: handle WX ch labels + + # arts settings (ar beep, ar int, cwid en, cwid field) + options = ["15s", "25s"] + rs = RadioSetting("artsinterval", "ARTS Interval", + RadioSettingValueList(options, options[_settings.artsinterval])) + arts.append(rs) + + options = ["off", "in range", "always"] + rs = RadioSetting("artsbeep", "ARTS Beep", + RadioSettingValueList(options, options[_settings.artsbeep])) + arts.append(rs) + + rs = RadioSetting("cwid_en", "CWID Enable", + RadioSettingValueBoolean(_settings.cwid_en)) + arts.append(rs) + + cwid = RadioSettingValueString(0, 6, self._decode_chars(_settings.cwid.get_value())) + cwid.set_charset(CHARSET) + rs = RadioSetting("cwid", "CWID", cwid) + arts.append(rs) + + # setup dtmf + options = ["manual", "auto"] + rs = RadioSetting("dtmfmode", "DTMF mode", + RadioSettingValueList(options, options[_settings.dtmfmode])) + dtmf.append(rs) + + for i in range(0,8+1): + name = "dtmf" + str(i+1) + dtmfsetting = self._memobj.dtmf[i] + #dtmflen = getattr(_settings, objname + "_len") + dtmfstr = "" + for c in dtmfsetting.digits: + if c < len(DTMFCHARSET): + dtmfstr += DTMFCHARSET[c] + if CHIRP_DEBUG: + print dtmfstr + dtmfentry = RadioSettingValueString(0, 16, dtmfstr) + dtmfentry.set_charset(DTMFCHARSET + list(" ")) + rs = RadioSetting(name, name.upper(), dtmfentry) + dtmf.append(rs) + + return top + + def set_settings(self, uisettings): + for element in uisettings: + if not isinstance(element, RadioSetting): + self.set_settings(element) + continue + if not element.changed(): + continue + try: + setting = element.get_name() + if re.match('dtmf\d', setting): + # set dtmf fields + dtmfstr = str(element.value).strip() + newval = [] + for i in range(0,16): + if i < len(dtmfstr): + newval.append(DTMFCHARSET.index(dtmfstr[i])) + else: + newval.append(0xFF) + if CHIRP_DEBUG: + print newval + idx = int(setting[-1:]) - 1 + _settings = self._memobj.dtmf[idx] + _settings.digits = newval + continue + _settings = self._memobj.settings + oldval = getattr(_settings, setting) + newval = element.value + if setting == "cwid": + newval = self._encode_chars(newval) + if CHIRP_DEBUG: + print "Setting %s(%s) <= %s" % (setting, + oldval, newval) + setattr(_settings, setting, newval) + except Exception, e: + print element.get_name() + raise + + \ No newline at end of file