[chirp_devel] Build test results: Successful

[Build System]

Tested changes:

[Dan Smith <dsmith at danplanet.com>] Add IC-7610 and fix IC-7300

Somehow the initial apply of the 7300 support duplicated some lines
in the memory structure that prevented proper parsing of memory
channels. This worked for reading memories, but would break when
we went to send memories to the radio as we were writing past the
end of our buffer. I'm not sure how this went unnoticed for the
last two years, but this patch fixes it.

[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281

[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141

[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281

[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292

[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269

[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231

[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212

[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214

[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117

[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181

[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176

[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172

[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels

[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122

[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166

[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163

[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145



Full log:

[...truncated 1541 lines...]
test_copy_all (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 copy all ... ok
test_detect (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 detect ... ok
test_edges (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 edges ... ok
test_settings (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 settings ... ok
test_banks (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode settings ... ok
test_banks (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 brute force ... ok
test_clone (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 clone ... ok
test_copy_all (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 copy all ... ok
test_detect (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 detect ... ok
test_edges (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 edges ... ok
test_settings (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 settings ... ok
test_banks (tests.TestCase_RadtelT18)
Testing Radtel T18 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadtelT18)
Testing Radtel T18 brute force ... ok
test_clone (tests.TestCase_RadtelT18)
Testing Radtel T18 clone ... ok
test_copy_all (tests.TestCase_RadtelT18)
Testing Radtel T18 copy all ... ok
test_detect (tests.TestCase_RadtelT18)
Testing Radtel T18 detect ... ok
test_edges (tests.TestCase_RadtelT18)
Testing Radtel T18 edges ... ok
test_settings (tests.TestCase_RadtelT18)
Testing Radtel T18 settings ... ok
test_banks (tests.TestCase_IcomID31A)
Testing Icom ID-31A banks ... ok
test_brute_force (tests.TestCase_IcomID31A)
Testing Icom ID-31A brute force ... ok
test_clone (tests.TestCase_IcomID31A)
Testing Icom ID-31A clone ... ok
test_copy_all (tests.TestCase_IcomID31A)
Testing Icom ID-31A copy all ... ok
test_detect (tests.TestCase_IcomID31A)
Testing Icom ID-31A detect ... ok
test_edges (tests.TestCase_IcomID31A)
Testing Icom ID-31A edges ... ok
test_settings (tests.TestCase_IcomID31A)
Testing Icom ID-31A settings ... ok
test_banks (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 banks ... ok
test_brute_force (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 brute force ... ok
test_clone (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 clone ... ok
test_copy_all (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 copy all ... ok
test_detect (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 detect ... ok
test_edges (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 edges ... ok
test_settings (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 brute force ... ok
test_clone (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 clone ... ok
test_copy_all (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 copy all ... ok
test_detect (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 detect ... ok
test_edges (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 edges ... ok
test_settings (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 settings ... ok
test_banks (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 brute force ... ok
test_clone (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 clone ... ok
test_copy_all (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 copy all ... ok
test_detect (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 detect ... ok
test_edges (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 edges ... ok
test_settings (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 settings ... ok
test_banks (tests.TestCase_RetevisRB85)
Testing Retevis RB85 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB85)
Testing Retevis RB85 brute force ... ok
test_clone (tests.TestCase_RetevisRB85)
Testing Retevis RB85 clone ... ok
test_copy_all (tests.TestCase_RetevisRB85)
Testing Retevis RB85 copy all ... ok
test_detect (tests.TestCase_RetevisRB85)
Testing Retevis RB85 detect ... ok
test_edges (tests.TestCase_RetevisRB85)
Testing Retevis RB85 edges ... ok
test_settings (tests.TestCase_RetevisRB85)
Testing Retevis RB85 settings ... ok
test_banks (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E banks ... ok
test_brute_force (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E brute force ... ok
test_clone (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E clone ... ok
test_copy_all (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E copy all ... ok
test_detect (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E detect ... ok
test_edges (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E edges ... ok
test_settings (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E settings ... ok
test_banks (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode settings ... ok
test_banks (tests.TestCase_RetevisRT95)
Testing Retevis RT95 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT95)
Testing Retevis RT95 brute force ... ok
test_clone (tests.TestCase_RetevisRT95)
Testing Retevis RT95 clone ... ok
test_copy_all (tests.TestCase_RetevisRT95)
Testing Retevis RT95 copy all ... ok
test_detect (tests.TestCase_RetevisRT95)
Testing Retevis RT95 detect ... ok
test_edges (tests.TestCase_RetevisRT95)
Testing Retevis RT95 edges ... ok
test_settings (tests.TestCase_RetevisRT95)
Testing Retevis RT95 settings ... ok
test_banks (tests.TestCase_RetevisRA85)
Testing Retevis RA85 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRA85)
Testing Retevis RA85 brute force ... ok
test_clone (tests.TestCase_RetevisRA85)
Testing Retevis RA85 clone ... ok
test_copy_all (tests.TestCase_RetevisRA85)
Testing Retevis RA85 copy all ... ok
test_detect (tests.TestCase_RetevisRA85)
Testing Retevis RA85 detect ... ok
test_edges (tests.TestCase_RetevisRA85)
Testing Retevis RA85 edges ... ok
test_settings (tests.TestCase_RetevisRA85)
Testing Retevis RA85 settings ... ok
test_banks (tests.TestCase_RetevisRT1)
Testing Retevis RT1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT1)
Testing Retevis RT1 brute force ... ok
test_clone (tests.TestCase_RetevisRT1)
Testing Retevis RT1 clone ... ok
test_copy_all (tests.TestCase_RetevisRT1)
Testing Retevis RT1 copy all ... ok
test_detect (tests.TestCase_RetevisRT1)
Testing Retevis RT1 detect ... ok
test_edges (tests.TestCase_RetevisRT1)
Testing Retevis RT1 edges ... ok
test_settings (tests.TestCase_RetevisRT1)
Testing Retevis RT1 settings ... ok
test_banks (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 brute force ... ok
test_clone (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 clone ... ok
test_copy_all (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 copy all ... ok
test_detect (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 detect ... ok
test_edges (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 edges ... ok
test_settings (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 settings ... ok
test_banks (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 brute force ... ok
test_clone (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 clone ... ok
test_copy_all (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 copy all ... ok
test_detect (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 detect ... ok
test_edges (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 edges ... ok
test_settings (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 settings ... ok
test_banks (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R banks ... ok
test_brute_force (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R brute force ... ok
test_clone (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R clone ... ok
test_copy_all (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R copy all ... ok
test_detect (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R detect ... ok
test_edges (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R edges ... ok
test_settings (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R settings ... ok
test_banks (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode settings ... ok
test_banks (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 brute force ... ok
test_clone (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 clone ... ok
test_copy_all (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 copy all ... ok
test_detect (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 detect ... ok
test_edges (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 edges ... ok
test_settings (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRB15)
Testing Retevis RB15 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB15)
Testing Retevis RB15 brute force ... ok
test_clone (tests.TestCase_RetevisRB15)
Testing Retevis RB15 clone ... ok
test_copy_all (tests.TestCase_RetevisRB15)
Testing Retevis RB15 copy all ... ok
test_detect (tests.TestCase_RetevisRB15)
Testing Retevis RB15 detect ... ok
test_edges (tests.TestCase_RetevisRB15)
Testing Retevis RB15 edges ... ok
test_settings (tests.TestCase_RetevisRB15)
Testing Retevis RB15 settings ... ok
test_banks (tests.TestCase_AbbreeAR518)
Testing Abbree AR-518 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AbbreeAR518)
Testing Abbree AR-518 brute force ... ok
test_clone (tests.TestCase_AbbreeAR518)
Testing Abbree AR-518 clone ... ok
test_copy_all (tests.TestCase_AbbreeAR518)
Testing Abbree AR-518 copy all ... ok
test_detect (tests.TestCase_AbbreeAR518)
Testing Abbree AR-518 detect ... ok
test_edges (tests.TestCase_AbbreeAR518)
Testing Abbree AR-518 edges ... ok
test_settings (tests.TestCase_AbbreeAR518)
Testing Abbree AR-518 settings ... ok
test_banks (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR banks ... ok
test_brute_force (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR brute force ... ok
test_clone (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR clone ... ok
test_copy_all (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR copy all ... ok
test_detect (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR detect ... ok
test_edges (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR edges ... ok
test_settings (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR settings ... ok
test_banks (tests.TestCase_RetevisRT16)
Testing Retevis RT16 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT16)
Testing Retevis RT16 brute force ... ok
test_clone (tests.TestCase_RetevisRT16)
Testing Retevis RT16 clone ... ok
test_copy_all (tests.TestCase_RetevisRT16)
Testing Retevis RT16 copy all ... ok
test_detect (tests.TestCase_RetevisRT16)
Testing Retevis RT16 detect ... ok
test_edges (tests.TestCase_RetevisRT16)
Testing Retevis RT16 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT16)
Testing Retevis RT16 settings ... ok
test_banks (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S brute force ... ok
test_clone (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S clone ... ok
test_copy_all (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S copy all ... ok
test_detect (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S detect ... ok
test_edges (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S edges ... ok
test_settings (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S settings ... ok
test_banks (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A brute force ... ok
test_clone (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A clone ... ok
test_copy_all (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A copy all ... ok
test_detect (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A detect ... ok
test_edges (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A edges ... ok
test_settings (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A settings ... ok
test_banks (tests.TestCase_WouxunKG935G)
Testing Wouxun KG-935G banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG935G)
Testing Wouxun KG-935G brute force ... ok
test_clone (tests.TestCase_WouxunKG935G)
Testing Wouxun KG-935G clone ... ok
test_copy_all (tests.TestCase_WouxunKG935G)
Testing Wouxun KG-935G copy all ... ok
test_detect (tests.TestCase_WouxunKG935G)
Testing Wouxun KG-935G detect ... ok
test_edges (tests.TestCase_WouxunKG935G)
Testing Wouxun KG-935G edges ... ok
test_settings (tests.TestCase_WouxunKG935G)
Testing Wouxun KG-935G settings ... ok
test_banks (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF brute force ... ok
test_clone (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF clone ... ok
test_copy_all (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF copy all ... ok
test_detect (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF detect ... ok
test_edges (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF edges ... ok
test_settings (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF settings ... ok
test_banks (tests.TestCase_RetevisRB17)
Testing Retevis RB17 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17)
Testing Retevis RB17 brute force ... ok
test_clone (tests.TestCase_RetevisRB17)
Testing Retevis RB17 clone ... ok
test_copy_all (tests.TestCase_RetevisRB17)
Testing Retevis RB17 copy all ... ok
test_detect (tests.TestCase_RetevisRB17)
Testing Retevis RB17 detect ... ok
test_edges (tests.TestCase_RetevisRB17)
Testing Retevis RB17 edges ... ok
test_settings (tests.TestCase_RetevisRB17)
Testing Retevis RB17 settings ... ok
test_banks (tests.TestCase_AbbreeAR63)
Testing Abbree AR-63 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AbbreeAR63)
Testing Abbree AR-63 brute force ... ok
test_clone (tests.TestCase_AbbreeAR63)
Testing Abbree AR-63 clone ... ok
test_copy_all (tests.TestCase_AbbreeAR63)
Testing Abbree AR-63 copy all ... ok
test_detect (tests.TestCase_AbbreeAR63)
Testing Abbree AR-63 detect ... ok
test_edges (tests.TestCase_AbbreeAR63)
Testing Abbree AR-63 edges ... ok
test_settings (tests.TestCase_AbbreeAR63)
Testing Abbree AR-63 settings ... ok
test_banks (tests.TestCase_RetevisRT19)
Testing Retevis RT19 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT19)
Testing Retevis RT19 brute force ... ok
test_clone (tests.TestCase_RetevisRT19)
Testing Retevis RT19 clone ... ok
test_copy_all (tests.TestCase_RetevisRT19)
Testing Retevis RT19 copy all ... ok
test_detect (tests.TestCase_RetevisRT19)
Testing Retevis RT19 detect ... ok
test_edges (tests.TestCase_RetevisRT19)
Testing Retevis RT19 edges ... ok
test_settings (tests.TestCase_RetevisRT19)
Testing Retevis RT19 settings ... ok
test_banks (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D banks ... ok
test_brute_force (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D brute force ... ok
test_clone (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D clone ... ok
test_copy_all (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D copy all ... ok
test_detect (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D detect ... ok
test_edges (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D edges ... ok
test_settings (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D settings ... ok
test_banks (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE banks ... ok
test_brute_force (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE brute force ... ok
test_clone (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE clone ... ok
test_copy_all (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE copy all ... ok
test_detect (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE detect ... ok
test_edges (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE edges ... ok
test_settings (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE settings ... ok
test_banks (tests.TestCase_IcomID51)
Testing Icom ID-51 banks ... ok
test_brute_force (tests.TestCase_IcomID51)
Testing Icom ID-51 brute force ... ok
test_clone (tests.TestCase_IcomID51)
Testing Icom ID-51 clone ... ok
test_copy_all (tests.TestCase_IcomID51)
Testing Icom ID-51 copy all ... ok
test_detect (tests.TestCase_IcomID51)
Testing Icom ID-51 detect ... ok
test_edges (tests.TestCase_IcomID51)
Testing Icom ID-51 edges ... ok
test_settings (tests.TestCase_IcomID51)
Testing Icom ID-51 settings ... ok
test_banks (tests.TestCase_TYTTH350)
Testing TYT TH-350 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH350)
Testing TYT TH-350 brute force ... ok
test_clone (tests.TestCase_TYTTH350)
Testing TYT TH-350 clone ... ok
test_copy_all (tests.TestCase_TYTTH350)
Testing TYT TH-350 copy all ... ok
test_detect (tests.TestCase_TYTTH350)
Testing TYT TH-350 detect ... ok
test_edges (tests.TestCase_TYTTH350)
Testing TYT TH-350 edges ... ok
test_settings (tests.TestCase_TYTTH350)
Testing TYT TH-350 settings ... ok
test_banks (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF brute force ... ok
test_clone (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF clone ... ok
test_copy_all (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF copy all ... ok
test_detect (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF detect ... ok
test_edges (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF edges ... ok
test_settings (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF settings ... ok
test_banks (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 brute force ... ok
test_clone (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 copy all ... ok
test_detect (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 detect ... ok
test_edges (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 edges ... ok
test_settings (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 settings ... ok
test_banks (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A brute force ... ok
test_clone (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A clone ... ok
test_copy_all (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A copy all ... ok
test_detect (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A detect ... ok
test_edges (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A edges ... ok
test_settings (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A settings ... ok
test_banks (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M brute force ... ok
test_clone (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M clone ... ok
test_copy_all (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M copy all ... ok
test_detect (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M detect ... ok
test_edges (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M edges ... ok
test_settings (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M settings ... ok
test_banks (tests.TestCase_RetevisRT21)
Testing Retevis RT21 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT21)
Testing Retevis RT21 brute force ... ok
test_clone (tests.TestCase_RetevisRT21)
Testing Retevis RT21 clone ... ok
test_copy_all (tests.TestCase_RetevisRT21)
Testing Retevis RT21 copy all ... ok
test_detect (tests.TestCase_RetevisRT21)
Testing Retevis RT21 detect ... ok
test_edges (tests.TestCase_RetevisRT21)
Testing Retevis RT21 edges ... ok
test_settings (tests.TestCase_RetevisRT21)
Testing Retevis RT21 settings ... ok
test_banks (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV brute force ... ok
test_clone (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV clone ... ok
test_copy_all (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV copy all ... ok
test_detect (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV detect ... ok
test_edges (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV edges ... ok
test_settings (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV settings ... ok
test_banks (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R banks ... ok
test_brute_force (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R brute force ... ok
test_clone (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R clone ... ok
test_copy_all (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R copy all ... ok
test_detect (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R detect ... ok
test_edges (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R edges ... ok
test_settings (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R settings ... ok
test_banks (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 brute force ... ok
test_clone (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 clone ... ok
test_copy_all (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 copy all ... ok
test_detect (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 detect ... ok
test_edges (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 edges ... ok
test_settings (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 settings ... ok
test_banks (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P brute force ... ok
test_clone (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P clone ... ok
test_copy_all (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P copy all ... ok
test_detect (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P detect ... ok
test_edges (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P edges ... ok
test_settings (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P settings ... ok
test_banks (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D detect ... ok
test_edges (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D edges ... ok
test_settings (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D settings ... ok
test_banks (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 banks ... ok
test_brute_force (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 brute force ... ok
test_clone (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 copy all ... ok
test_detect (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 detect ... ok
test_edges (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 edges ... ok
test_settings (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 settings ... ok
test_banks (tests.TestCase_RetevisRT22)
Testing Retevis RT22 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22)
Testing Retevis RT22 brute force ... ok
test_clone (tests.TestCase_RetevisRT22)
Testing Retevis RT22 clone ... ok
test_copy_all (tests.TestCase_RetevisRT22)
Testing Retevis RT22 copy all ... ok
test_detect (tests.TestCase_RetevisRT22)
Testing Retevis RT22 detect ... ok
test_edges (tests.TestCase_RetevisRT22)
Testing Retevis RT22 edges ... ok
test_settings (tests.TestCase_RetevisRT22)
Testing Retevis RT22 settings ... ok
test_banks (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG brute force ... ok
test_clone (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG clone ... ok
test_copy_all (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG copy all ... ok
test_detect (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG detect ... ok
test_edges (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG edges ... ok
test_settings (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 brute force ... ok
test_clone (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 clone ... ok
test_copy_all (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 copy all ... ok
test_detect (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 detect ... ok
test_edges (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 edges ... ok
test_settings (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 settings ... ok
test_banks (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus banks ... ok
test_brute_force (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus brute force ... ok
test_clone (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus clone ... ok
test_copy_all (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus copy all ... ok
test_detect (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus detect ... ok
test_edges (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus edges ... ok
test_settings (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus settings ... ok
test_banks (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 brute force ... ok
test_clone (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 clone ... ok
test_copy_all (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 copy all ... ok
test_detect (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 detect ... ok
test_edges (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 edges ... ok
test_settings (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 settings ... ok
test_banks (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus detect ... ok
test_edges (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus edges ... ok
test_settings (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus settings ... ok
test_banks (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V brute force ... ok
test_clone (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V clone ... ok
test_copy_all (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V copy all ... ok
test_detect (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V detect ... ok
test_edges (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V edges ... ok
test_settings (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V settings ... ok
test_banks (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 brute force ... ok
test_clone (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 clone ... ok
test_copy_all (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 copy all ... ok
test_detect (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 detect ... ok
test_edges (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 edges ... ok
test_settings (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 settings ... ok
test_banks (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS brute force ... ok
test_clone (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS clone ... ok
test_copy_all (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS copy all ... ok
test_detect (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS detect ... ok
test_edges (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS edges ... ok
test_settings (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS settings ... ok
test_banks (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S brute force ... ok
test_clone (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S clone ... ok
test_copy_all (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S copy all ... ok
test_detect (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S detect ... ok
test_edges (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S edges ... ok
test_settings (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S settings ... ok
test_banks (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 brute force ... ok
test_clone (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 clone ... ok
test_copy_all (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 copy all ... ok
test_detect (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 detect ... ok
test_edges (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 edges ... ok
test_settings (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND brute force ... ok
test_clone (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND clone ... ok
test_copy_all (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND copy all ... ok
test_detect (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND detect ... ok
test_edges (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND edges ... ok
test_settings (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND settings ... ok
test_banks (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E detect ... ok
test_edges (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E edges ... ok
test_settings (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E settings ... ok
test_banks (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 detect ... ok
test_edges (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 edges ... ok
test_settings (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRB18)
Testing Retevis RB18 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB18)
Testing Retevis RB18 brute force ... ok
test_clone (tests.TestCase_RetevisRB18)
Testing Retevis RB18 clone ... ok
test_copy_all (tests.TestCase_RetevisRB18)
Testing Retevis RB18 copy all ... ok
test_detect (tests.TestCase_RetevisRB18)
Testing Retevis RB18 detect ... ok
test_edges (tests.TestCase_RetevisRB18)
Testing Retevis RB18 edges ... ok
test_settings (tests.TestCase_RetevisRB18)
Testing Retevis RB18 settings ... ok
test_banks (tests.TestCase_IcomID800H)
Testing Icom ID-800H banks ... ok
test_brute_force (tests.TestCase_IcomID800H)
Testing Icom ID-800H brute force ... ok
test_clone (tests.TestCase_IcomID800H)
Testing Icom ID-800H clone ... ok
test_copy_all (tests.TestCase_IcomID800H)
Testing Icom ID-800H copy all ... ok
test_detect (tests.TestCase_IcomID800H)
Testing Icom ID-800H detect ... ok
test_edges (tests.TestCase_IcomID800H)
Testing Icom ID-800H edges ... ok
test_settings (tests.TestCase_IcomID800H)
Testing Icom ID-800H settings ... ok
test_banks (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S brute force ... ok
test_clone (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S clone ... ok
test_copy_all (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S copy all ... ok
test_detect (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S detect ... ok
test_edges (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S edges ... ok
test_settings (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S settings ... ok
test_banks (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) detect ... ok
test_edges (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) edges ... ok
test_settings (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) settings ... ok
test_banks (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 brute force ... ok
test_clone (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 clone ... ok
test_copy_all (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 copy all ... ok
test_detect (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 detect ... ok
test_edges (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 edges ... ok
test_settings (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R detect ... ok
test_edges (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R edges ... ok
test_settings (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A brute force ... ok
test_clone (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A copy all ... ok
test_detect (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A detect ... ok
test_edges (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A edges ... ok
test_settings (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A settings ... ok
test_banks (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 brute force ... ok
test_clone (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 clone ... ok
test_copy_all (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 copy all ... ok
test_detect (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 detect ... ok
test_edges (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 edges ... ok
test_settings (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 settings ... ok
test_banks (tests.TestCase_RetevisRB19)
Testing Retevis RB19 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB19)
Testing Retevis RB19 brute force ... ok
test_clone (tests.TestCase_RetevisRB19)
Testing Retevis RB19 clone ... ok
test_copy_all (tests.TestCase_RetevisRB19)
Testing Retevis RB19 copy all ... ok
test_detect (tests.TestCase_RetevisRB19)
Testing Retevis RB19 detect ... ok
test_edges (tests.TestCase_RetevisRB19)
Testing Retevis RB19 edges ... ok
test_settings (tests.TestCase_RetevisRB19)
Testing Retevis RB19 settings ... ok
test_banks (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 brute force ... ok
test_clone (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 clone ... ok
test_copy_all (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 copy all ... ok
test_detect (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 detect ... ok
test_edges (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 edges ... ok
test_settings (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 settings ... ok
test_banks (tests.TestCase_RetevisRT23)
Testing Retevis RT23 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT23)
Testing Retevis RT23 brute force ... ok
test_clone (tests.TestCase_RetevisRT23)
Testing Retevis RT23 clone ... ok
test_copy_all (tests.TestCase_RetevisRT23)
Testing Retevis RT23 copy all ... ok
test_detect (tests.TestCase_RetevisRT23)
Testing Retevis RT23 detect ... ok
test_edges (tests.TestCase_RetevisRT23)
Testing Retevis RT23 edges ... ok
test_settings (tests.TestCase_RetevisRT23)
Testing Retevis RT23 settings ... ok
test_banks (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T brute force ... ok
test_clone (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T clone ... ok
test_copy_all (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T copy all ... ok
test_detect (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T detect ... ok
test_edges (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T edges ... ok
test_settings (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 brute force ... ok
test_clone (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 copy all ... ok
test_detect (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 detect ... ok
test_edges (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 edges ... ok
test_settings (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 settings ... ok
test_banks (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus brute force ... ok
test_clone (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus copy all ... ok
test_detect (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus detect ... ok
test_edges (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus edges ... ok
test_settings (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus settings ... ok
test_banks (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M brute force ... ok
test_clone (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M clone ... ok
test_copy_all (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M copy all ... ok
test_detect (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M detect ... ok
test_edges (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M edges ... ok
test_settings (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M settings ... ok
test_banks (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 brute force ... ok
test_clone (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 copy all ... ok
test_detect (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 detect ... ok
test_edges (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 edges ... ok
test_settings (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 settings ... ok
test_banks (tests.TestCase_IcomID880H)
Testing Icom ID-880H banks ... ok
test_brute_force (tests.TestCase_IcomID880H)
Testing Icom ID-880H brute force ... ok
test_clone (tests.TestCase_IcomID880H)
Testing Icom ID-880H clone ... ok
test_copy_all (tests.TestCase_IcomID880H)
Testing Icom ID-880H copy all ... ok
test_detect (tests.TestCase_IcomID880H)
Testing Icom ID-880H detect ... ok
test_edges (tests.TestCase_IcomID880H)
Testing Icom ID-880H edges ... ok
test_settings (tests.TestCase_IcomID880H)
Testing Icom ID-880H settings ... ok
test_banks (tests.TestCase_RetevisRB19P)
Testing Retevis RB19P banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB19P)
Testing Retevis RB19P brute force ... ok
test_clone (tests.TestCase_RetevisRB19P)
Testing Retevis RB19P clone ... ok
test_copy_all (tests.TestCase_RetevisRB19P)
Testing Retevis RB19P copy all ... ok
test_detect (tests.TestCase_RetevisRB19P)
Testing Retevis RB19P detect ... ok
test_edges (tests.TestCase_RetevisRB19P)
Testing Retevis RB19P edges ... ok
test_settings (tests.TestCase_RetevisRB19P)
Testing Retevis RB19P settings ... ok
test_banks (tests.TestCase_RetevisRT26)
Testing Retevis RT26 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT26)
Testing Retevis RT26 brute force ... ok
test_clone (tests.TestCase_RetevisRT26)
Testing Retevis RT26 clone ... ok
test_copy_all (tests.TestCase_RetevisRT26)
Testing Retevis RT26 copy all ... ok
test_detect (tests.TestCase_RetevisRT26)
Testing Retevis RT26 detect ... ok
test_edges (tests.TestCase_RetevisRT26)
Testing Retevis RT26 edges ... ok
test_settings (tests.TestCase_RetevisRT26)
Testing Retevis RT26 settings ... ok
test_banks (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P brute force ... ok
test_clone (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P clone ... ok
test_copy_all (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P copy all ... ok
test_detect (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P detect ... ok
test_edges (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P edges ... ok
test_settings (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P settings ... ok
test_banks (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R brute force ... ok
test_clone (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R clone ... ok
test_copy_all (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R copy all ... ok
test_detect (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R detect ... ok
test_edges (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R edges ... ok
test_settings (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) detect ... ok
test_edges (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) edges ... ok
test_settings (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) settings ... ok
test_banks (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV brute force ... ok
test_clone (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV clone ... ok
test_copy_all (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV copy all ... ok
test_detect (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV detect ... ok
test_edges (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV edges ... ok
test_settings (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV settings ... ok
test_banks (tests.TestCase_RetevisRB23)
Testing Retevis RB23 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB23)
Testing Retevis RB23 brute force ... ok
test_clone (tests.TestCase_RetevisRB23)
Testing Retevis RB23 clone ... ok
test_copy_all (tests.TestCase_RetevisRB23)
Testing Retevis RB23 copy all ... ok
test_detect (tests.TestCase_RetevisRB23)
Testing Retevis RB23 detect ... ok
test_edges (tests.TestCase_RetevisRB23)
Testing Retevis RB23 edges ... ok
test_settings (tests.TestCase_RetevisRB23)
Testing Retevis RB23 settings ... ok
test_banks (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M brute force ... ok
test_clone (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M clone ... ok
test_copy_all (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M copy all ... ok
test_detect (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M detect ... ok
test_edges (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M edges ... ok
test_settings (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M brute force ... ok
test_clone (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M copy all ... ok
test_detect (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M detect ... ok
test_edges (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M edges ... ok
test_settings (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT29UHF)
Testing Retevis RT29_UHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT29UHF)
Testing Retevis RT29_UHF brute force ... ok
test_clone (tests.TestCase_RetevisRT29UHF)
Testing Retevis RT29_UHF clone ... ok
test_copy_all (tests.TestCase_RetevisRT29UHF)
Testing Retevis RT29_UHF copy all ... ok
test_detect (tests.TestCase_RetevisRT29UHF)
Testing Retevis RT29_UHF detect ... ok
test_edges (tests.TestCase_RetevisRT29UHF)
Testing Retevis RT29_UHF edges ... ok
test_settings (tests.TestCase_RetevisRT29UHF)
Testing Retevis RT29_UHF settings ... ok
test_banks (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 brute force ... ok
test_clone (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 clone ... ok
test_copy_all (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 copy all ... ok
test_detect (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 detect ... ok
test_edges (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 edges ... ok
test_settings (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 banks ... ok
test_brute_force (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 brute force ... ok
test_clone (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 copy all ... ok
test_detect (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 detect ... ok
test_edges (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 edges ... ok
test_settings (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRB26)
Testing Retevis RB26 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB26)
Testing Retevis RB26 brute force ... ok
test_clone (tests.TestCase_RetevisRB26)
Testing Retevis RB26 clone ... ok
test_copy_all (tests.TestCase_RetevisRB26)
Testing Retevis RB26 copy all ... ok
test_detect (tests.TestCase_RetevisRB26)
Testing Retevis RB26 detect ... ok
test_edges (tests.TestCase_RetevisRB26)
Testing Retevis RB26 edges ... ok
test_settings (tests.TestCase_RetevisRB26)
Testing Retevis RB26 settings ... ok
test_banks (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M brute force ... ok
test_clone (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M copy all ... ok
test_detect (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M detect ... ok
test_edges (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M edges ... ok
test_settings (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K brute force ... ok
test_clone (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K clone ... ok
test_copy_all (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K copy all ... ok
test_detect (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K detect ... ok
test_edges (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K edges ... ok
test_settings (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K settings ... ok
test_banks (tests.TestCase_RetevisRT29VHF)
Testing Retevis RT29_VHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT29VHF)
Testing Retevis RT29_VHF brute force ... ok
test_clone (tests.TestCase_RetevisRT29VHF)
Testing Retevis RT29_VHF clone ... ok
test_copy_all (tests.TestCase_RetevisRT29VHF)
Testing Retevis RT29_VHF copy all ... ok
test_detect (tests.TestCase_RetevisRT29VHF)
Testing Retevis RT29_VHF detect ... ok
test_edges (tests.TestCase_RetevisRT29VHF)
Testing Retevis RT29_VHF edges ... ok
test_settings (tests.TestCase_RetevisRT29VHF)
Testing Retevis RT29_VHF settings ... ok
test_banks (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M brute force ... ok
test_clone (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M clone ... ok
test_copy_all (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M copy all ... ok
test_detect (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M detect ... ok
test_edges (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M edges ... ok
test_settings (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M settings ... ok
test_banks (tests.TestCase_RetevisRB27)
Testing Retevis RB27 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB27)
Testing Retevis RB27 brute force ... ok
test_clone (tests.TestCase_RetevisRB27)
Testing Retevis RB27 clone ... ok
test_copy_all (tests.TestCase_RetevisRB27)
Testing Retevis RB27 copy all ... ok
test_detect (tests.TestCase_RetevisRB27)
Testing Retevis RB27 detect ... ok
test_edges (tests.TestCase_RetevisRB27)
Testing Retevis RB27 edges ... ok
test_settings (tests.TestCase_RetevisRB27)
Testing Retevis RB27 settings ... ok
test_banks (tests.TestCase_QYTKT8R)
Testing QYT KT-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT8R)
Testing QYT KT-8R brute force ... ok
test_clone (tests.TestCase_QYTKT8R)
Testing QYT KT-8R clone ... ok
test_copy_all (tests.TestCase_QYTKT8R)
Testing QYT KT-8R copy all ... ok
test_detect (tests.TestCase_QYTKT8R)
Testing QYT KT-8R detect ... ok
test_edges (tests.TestCase_QYTKT8R)
Testing QYT KT-8R edges ... ok
test_settings (tests.TestCase_QYTKT8R)
Testing QYT KT-8R settings ... ok
test_banks (tests.TestCase_RetevisRT40B)
Testing Retevis RT40B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT40B)
Testing Retevis RT40B brute force ... ok
test_clone (tests.TestCase_RetevisRT40B)
Testing Retevis RT40B clone ... ok
test_copy_all (tests.TestCase_RetevisRT40B)
Testing Retevis RT40B copy all ... ok
test_detect (tests.TestCase_RetevisRT40B)
Testing Retevis RT40B detect ... ok
test_edges (tests.TestCase_RetevisRT40B)
Testing Retevis RT40B edges ... ok
test_settings (tests.TestCase_RetevisRT40B)
Testing Retevis RT40B settings ... ok
test_banks (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH brute force ... ok
test_clone (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH clone ... ok
test_copy_all (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH copy all ... ok
test_detect (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH detect ... ok
test_edges (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH edges ... ok
test_settings (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH settings ... ok
test_banks (tests.TestCase_RetevisRB27B)
Testing Retevis RB27B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB27B)
Testing Retevis RB27B brute force ... ok
test_clone (tests.TestCase_RetevisRB27B)
Testing Retevis RB27B clone ... ok
test_copy_all (tests.TestCase_RetevisRB27B)
Testing Retevis RB27B copy all ... ok
test_detect (tests.TestCase_RetevisRB27B)
Testing Retevis RB27B detect ... ok
test_edges (tests.TestCase_RetevisRB27B)
Testing Retevis RB27B edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB27B)
Testing Retevis RB27B settings ... ok
test_banks (tests.TestCase_QYTKTWP12)
Testing QYT KT-WP12 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKTWP12)
Testing QYT KT-WP12 brute force ... ok
test_clone (tests.TestCase_QYTKTWP12)
Testing QYT KT-WP12 clone ... ok
test_copy_all (tests.TestCase_QYTKTWP12)
Testing QYT KT-WP12 copy all ... ok
test_detect (tests.TestCase_QYTKTWP12)
Testing QYT KT-WP12 detect ... ok
test_edges (tests.TestCase_QYTKTWP12)
Testing QYT KT-WP12 edges ... ok
test_settings (tests.TestCase_QYTKTWP12)
Testing QYT KT-WP12 settings ... ok
test_banks (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D banks ... ok
test_brute_force (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D brute force ... ok
test_clone (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D clone ... ok
test_copy_all (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D copy all ... ok
test_detect (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D detect ... ok
test_edges (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D edges ... ok
test_settings (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D settings ... ok
test_banks (tests.TestCase_RetevisRT47)
Testing Retevis RT47 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT47)
Testing Retevis RT47 brute force ... ok
test_clone (tests.TestCase_RetevisRT47)
Testing Retevis RT47 clone ... ok
test_copy_all (tests.TestCase_RetevisRT47)
Testing Retevis RT47 copy all ... ok
test_detect (tests.TestCase_RetevisRT47)
Testing Retevis RT47 detect ... ok
test_edges (tests.TestCase_RetevisRT47)
Testing Retevis RT47 edges ... ok
test_settings (tests.TestCase_RetevisRT47)
Testing Retevis RT47 settings ... ok
test_banks (tests.TestCase_RetevisRB27V)
Testing Retevis RB27V banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB27V)
Testing Retevis RB27V brute force ... ok
test_clone (tests.TestCase_RetevisRB27V)
Testing Retevis RB27V clone ... ok
test_copy_all (tests.TestCase_RetevisRB27V)
Testing Retevis RB27V copy all ... ok
test_detect (tests.TestCase_RetevisRB27V)
Testing Retevis RB27V detect ... ok
test_edges (tests.TestCase_RetevisRB27V)
Testing Retevis RB27V edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB27V)
Testing Retevis RB27V settings ... ok
test_banks (tests.TestCase_KYDIP620)
Testing KYD IP-620 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KYDIP620)
Testing KYD IP-620 brute force ... ok
test_clone (tests.TestCase_KYDIP620)
Testing KYD IP-620 clone ... ok
test_copy_all (tests.TestCase_KYDIP620)
Testing KYD IP-620 copy all ... ok
test_detect (tests.TestCase_KYDIP620)
Testing KYD IP-620 detect ... ok
test_edges (tests.TestCase_KYDIP620)
Testing KYD IP-620 edges ... ok
test_settings (tests.TestCase_KYDIP620)
Testing KYD IP-620 settings ... ok
test_banks (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D brute force ... ok
test_clone (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D clone ... ok
test_copy_all (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D copy all ... ok
test_detect (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D detect ... ok
test_edges (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D edges ... ok
test_settings (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D settings ... ok
test_banks (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R banks ... ok
test_brute_force (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R brute force ... ok
test_clone (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R clone ... ok
test_copy_all (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R copy all ... ok
test_detect (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R detect ... ok
test_edges (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R edges ... ok
test_settings (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R settings ... ok
test_banks (tests.TestCase_RetevisRB615)
Testing Retevis RB615 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB615)
Testing Retevis RB615 brute force ... ok
test_clone (tests.TestCase_RetevisRB615)
Testing Retevis RB615 clone ... ok
test_copy_all (tests.TestCase_RetevisRB615)
Testing Retevis RB615 copy all ... ok
test_detect (tests.TestCase_RetevisRB615)
Testing Retevis RB615 detect ... ok
test_edges (tests.TestCase_RetevisRB615)
Testing Retevis RB615 edges ... ok
test_settings (tests.TestCase_RetevisRB615)
Testing Retevis RB615 settings ... ok
test_banks (tests.TestCase_RetevisRT47V)
Testing Retevis RT47V banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT47V)
Testing Retevis RT47V brute force ... ok
test_clone (tests.TestCase_RetevisRT47V)
Testing Retevis RT47V clone ... ok
test_copy_all (tests.TestCase_RetevisRT47V)
Testing Retevis RT47V copy all ... ok
test_detect (tests.TestCase_RetevisRT47V)
Testing Retevis RT47V detect ... ok
test_edges (tests.TestCase_RetevisRT47V)
Testing Retevis RT47V edges ... ok
test_settings (tests.TestCase_RetevisRT47V)
Testing Retevis RT47V settings ... ok
test_banks (tests.TestCase_KYDNC630A)
Testing KYD NC-630A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KYDNC630A)
Testing KYD NC-630A brute force ... ok
test_clone (tests.TestCase_KYDNC630A)
Testing KYD NC-630A clone ... ok
test_copy_all (tests.TestCase_KYDNC630A)
Testing KYD NC-630A copy all ... ok
test_detect (tests.TestCase_KYDNC630A)
Testing KYD NC-630A detect ... ok
test_edges (tests.TestCase_KYDNC630A)
Testing KYD NC-630A edges ... ok
test_settings (tests.TestCase_KYDNC630A)
Testing KYD NC-630A settings ... ok
test_banks (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) brute force ... ok
test_clone (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) clone ... ok
test_copy_all (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) copy all ... ok
test_detect (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) detect ... ok
test_edges (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) edges ... ok
test_settings (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) settings ... ok
test_banks (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G banks ... ok
test_brute_force (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G brute force ... ok
test_clone (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G clone ... ok
test_copy_all (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G copy all ... ok
test_detect (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G detect ... ok
test_edges (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G edges ... ok
test_settings (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G settings ... ok
test_banks (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 brute force ... ok
test_clone (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 copy all ... ok
test_detect (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 detect ... ok
test_edges (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 edges ... ok
test_settings (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 settings ... ok

----------------------------------------------------------------------
Ran 1435 tests in 526.003s

OK (skipped=203)

struct memory {
  bbcd rx_freq[4];
  bbcd tx_freq[4];
  lbcd rx_tone[2];
  lbcd tx_tone[2];

  u8 unknown10:5,
     highpower:1,
     unknown11:2;
  u8 unknown20:4,
     narrow:1,
     unknown21:3;
  u8 unknown31:1,
     scanadd:1,
     unknown32:6;
  u8 unknown4;
};

struct name {
  char name[7];
};

#seekto 0x0010;
struct memory channels[128];

#seekto 0x08C0;
struct name names[128];

#seekto 0x2020;
struct memory vfo1;
struct memory vfo2;

style create: /chirp/.tox/style
style installdeps: pep8==1.6.2, future
style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
style run-test-pre: PYTHONHASHSEED='2707822765'
style run-test: commands[0] | python ./tools/cpep8.py
___________________________________ summary ____________________________________
  unit: commands succeeded
  driver: commands succeeded
  style: commands succeeded
  congratulations :)
Email was triggered for: Success
Sending email for trigger: Success