[chirp_devel] Build test results: Successful

Build System
Mon Jul 25 16:05:43 PDT 2022 

Tested changes:

[Dan Smith <dsmith at danplanet.com>] Merge branch 'master' of github.com:kk7ds/chirp

[Jim Unroe <rock.unroe at gmail.com>] New Model: BTECH GMRS-20V2

This patch adds support for the BTECH GMRS-20V2 mobile radio.

Resolves #9887

[Jim Unroe <rock.unroe at gmail.com>] [RB615] Add Retevis RB615

This patch adds support for the Retevis RB615

fixes to #8531

[Jim Unroe <rock.unroe at gmail.com>] [RB15] Add Retevis RB15

This patch adds support for the Retevis RB15

related to #8531

[Jim Unroe <rock.unroe at gmail.com>] [FRS-A1] Add BTECH FRS-A1

This patch adds support for the Baofeng Tech FRS-A1.

related to #9943

[Jim Unroe <rock.unroe at gmail.com>] [RB17A] Add settings: Compander and PF1 Key

This patch adds the following settings to the Retevis RB17A radio.

Compander
PF1 Key

fixes #9940

[Jim Unroe <rock.unroe at gmail.com>] [RT29] Add Retevis RT29 Radios

This patch adds support for the RT29 UHF and RT29 VHF radios.

Fixes #8581

[Jim Unroe <rock.unroe at gmail.com>] [RT21] Add 'Off' selection to 'Time-out timer' setting

The Retevis RT29's Time-out time setting has the following choices available:

Off + 15 through 600 seconds in 15 second steps

The RT21 driver currently only supports the following choices:

15 through 600 seconds in 15 second steps

The radios currently supported by this driver and use the 'Time-out timer'
setting, Retevis RT21 and RB17A, actually support the missing 'Off' choice.
Adding 'Off' to the 'Time-out timer' setting list will aid in the process of
adding support for the Retevis RT29 series of radios.

This patch refactors the 'Time-out timer' setting.

Prep work for #8581

[Jim Unroe <rock.unroe at gmail.com>] [RT21] Rework 'Scramble Type' setting

I don't know what I was thinking when I created the code for the 'Scramble
Type' setting support for the Retevis RT21 radio. I am reworking it now to
aid in the process of adding support for the Retevis RT29 series of radios.

The setting, which used RadioSettingValueList(), was updated to use
RadioSettingValueInteger().

This patch refactors the 'Scramble Type' setting.

Prep work for #8581

[Oleksandr Kravchuk <sashko at users.noreply.github.com>] Add SE Jakradio 155MHz version to stock config (#26)

Jaktradio (hunting radio) is a communication radio used for hunting,
wildlife care, forestry, agriculture and outdoor life, etc. in Sweden.

[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281

[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141

[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281

[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292

[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269

[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231

[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212

[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214

[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117

[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181

[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176

[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172

[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels

[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122

[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166

[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163

[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145



Full log:

[...truncated 1387 lines...]
test_copy_all (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 detect ... ok
test_edges (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 edges ... ok
test_settings (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 settings ... ok
test_banks (tests.TestCase_RetevisRB619)
Testing Retevis RB619 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB619)
Testing Retevis RB619 brute force ... ok
test_clone (tests.TestCase_RetevisRB619)
Testing Retevis RB619 clone ... ok
test_copy_all (tests.TestCase_RetevisRB619)
Testing Retevis RB619 copy all ... ok
test_detect (tests.TestCase_RetevisRB619)
Testing Retevis RB619 detect ... ok
test_edges (tests.TestCase_RetevisRB619)
Testing Retevis RB619 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB619)
Testing Retevis RB619 settings ... ok
test_banks (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 brute force ... ok
test_clone (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 copy all ... ok
test_detect (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 detect ... ok
test_edges (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 edges ... ok
test_settings (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 settings ... ok
test_banks (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A brute force ... ok
test_clone (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A clone ... ok
test_copy_all (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A copy all ... ok
test_detect (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A detect ... ok
test_edges (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A edges ... ok
test_settings (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 brute force ... ok
test_clone (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 clone ... ok
test_copy_all (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 copy all ... ok
test_detect (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 detect ... ok
test_edges (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 edges ... ok
test_settings (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 settings ... ok
test_banks (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 brute force ... ok
test_clone (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 clone ... ok
test_copy_all (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 copy all ... ok
test_detect (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 detect ... ok
test_edges (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 edges ... ok
test_settings (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 settings ... ok
test_banks (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 brute force ... ok
test_clone (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 clone ... ok
test_copy_all (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 copy all ... ok
test_detect (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 detect ... ok
test_edges (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 edges ... ok
test_settings (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 settings ... ok
test_banks (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 detect ... ok
test_edges (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 edges ... ok
test_settings (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 settings ... ok
test_banks (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D banks ... ok
test_brute_force (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D brute force ... ok
test_clone (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D clone ... ok
test_copy_all (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D copy all ... ok
test_detect (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D detect ... ok
test_edges (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D edges ... ok
test_settings (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D settings ... ok
test_banks (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR banks ... ok
test_brute_force (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR brute force ... ok
test_clone (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR clone ... ok
test_copy_all (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR copy all ... ok
test_detect (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR detect ... ok
test_edges (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR edges ... ok
test_settings (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR settings ... ok
test_banks (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 detect ... ok
test_edges (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 edges ... ok
test_settings (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 settings ... ok
test_banks (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B brute force ... ok
test_clone (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B clone ... ok
test_copy_all (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B copy all ... ok
test_detect (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B detect ... ok
test_edges (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B settings ... ok
test_banks (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E brute force ... ok
test_clone (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E clone ... ok
test_copy_all (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E copy all ... ok
test_detect (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E detect ... ok
test_edges (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E edges ... ok
test_settings (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RadioddityR2)
Testing Radioddity R2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityR2)
Testing Radioddity R2 brute force ... ok
test_clone (tests.TestCase_RadioddityR2)
Testing Radioddity R2 clone ... ok
test_copy_all (tests.TestCase_RadioddityR2)
Testing Radioddity R2 copy all ... ok
test_detect (tests.TestCase_RadioddityR2)
Testing Radioddity R2 detect ... ok
test_edges (tests.TestCase_RadioddityR2)
Testing Radioddity R2 edges ... ok
test_settings (tests.TestCase_RadioddityR2)
Testing Radioddity R2 settings ... ok
test_banks (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D detect ... ok
test_edges (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D edges ... ok
test_settings (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D settings ... ok
test_banks (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 brute force ... ok
test_clone (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 clone ... ok
test_copy_all (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 copy all ... ok
test_detect (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 detect ... ok
test_edges (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 edges ... ok
test_settings (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 brute force ... ok
test_clone (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 clone ... ok
test_copy_all (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 copy all ... ok
test_detect (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 detect ... ok
test_edges (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 edges ... ok
test_settings (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 settings ... ok
test_banks (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 brute force ... ok
test_clone (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 clone ... ok
test_copy_all (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 copy all ... ok
test_detect (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 detect ... ok
test_edges (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 edges ... ok
test_settings (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 settings ... ok
test_banks (tests.TestCase_RetevisRB75)
Testing Retevis RB75 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB75)
Testing Retevis RB75 brute force ... ok
test_clone (tests.TestCase_RetevisRB75)
Testing Retevis RB75 clone ... ok
test_copy_all (tests.TestCase_RetevisRB75)
Testing Retevis RB75 copy all ... ok
test_detect (tests.TestCase_RetevisRB75)
Testing Retevis RB75 detect ... ok
test_edges (tests.TestCase_RetevisRB75)
Testing Retevis RB75 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB75)
Testing Retevis RB75 settings ... ok
test_banks (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 brute force ... ok
test_clone (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 copy all ... ok
test_detect (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 detect ... ok
test_edges (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 edges ... ok
test_settings (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 settings ... ok
test_banks (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 detect ... ok
test_edges (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 edges ... ok
test_settings (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 settings ... ok
test_banks (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus brute force ... ok
test_clone (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus clone ... ok
test_copy_all (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus copy all ... ok
test_detect (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus detect ... ok
test_edges (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus edges ... ok
test_settings (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus settings ... ok
test_banks (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G brute force ... ok
test_clone (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G clone ... ok
test_copy_all (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G copy all ... ok
test_detect (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G detect ... ok
test_edges (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G edges ... ok
test_settings (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G settings ... ok
test_banks (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus detect ... ok
test_edges (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus edges ... ok
test_settings (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus settings ... ok
test_banks (tests.TestCase_RetevisRB85)
Testing Retevis RB85 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB85)
Testing Retevis RB85 brute force ... ok
test_clone (tests.TestCase_RetevisRB85)
Testing Retevis RB85 clone ... ok
test_copy_all (tests.TestCase_RetevisRB85)
Testing Retevis RB85 copy all ... ok
test_detect (tests.TestCase_RetevisRB85)
Testing Retevis RB85 detect ... ok
test_edges (tests.TestCase_RetevisRB85)
Testing Retevis RB85 edges ... ok
test_settings (tests.TestCase_RetevisRB85)
Testing Retevis RB85 settings ... ok
test_banks (tests.TestCase_IcomID31A)
Testing Icom ID-31A banks ... ok
test_brute_force (tests.TestCase_IcomID31A)
Testing Icom ID-31A brute force ... ok
test_clone (tests.TestCase_IcomID31A)
Testing Icom ID-31A clone ... ok
test_copy_all (tests.TestCase_IcomID31A)
Testing Icom ID-31A copy all ... ok
test_detect (tests.TestCase_IcomID31A)
Testing Icom ID-31A detect ... ok
test_edges (tests.TestCase_IcomID31A)
Testing Icom ID-31A edges ... ok
test_settings (tests.TestCase_IcomID31A)
Testing Icom ID-31A settings ... ok
test_banks (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 brute force ... ok
test_clone (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 clone ... ok
test_copy_all (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 copy all ... ok
test_detect (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 detect ... ok
test_edges (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 edges ... ok
test_settings (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 settings ... ok
test_banks (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 detect ... ok
test_edges (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 settings ... ok
test_banks (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D banks ... ok
test_brute_force (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D brute force ... ok
test_clone (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D clone ... ok
test_copy_all (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D copy all ... ok
test_detect (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D detect ... ok
test_edges (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D edges ... ok
test_settings (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D settings ... ok
test_banks (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 banks ... ok
test_brute_force (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 brute force ... ok
test_clone (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 clone ... ok
test_copy_all (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 copy all ... ok
test_detect (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 detect ... ok
test_edges (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 edges ... ok
test_settings (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 settings ... ok
test_banks (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV brute force ... ok
test_clone (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV clone ... ok
test_copy_all (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV copy all ... ok
test_detect (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV detect ... ok
test_edges (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV edges ... ok
test_settings (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV settings ... ok
test_banks (tests.TestCase_RetevisRT1)
Testing Retevis RT1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT1)
Testing Retevis RT1 brute force ... ok
test_clone (tests.TestCase_RetevisRT1)
Testing Retevis RT1 clone ... ok
test_copy_all (tests.TestCase_RetevisRT1)
Testing Retevis RT1 copy all ... ok
test_detect (tests.TestCase_RetevisRT1)
Testing Retevis RT1 detect ... ok
test_edges (tests.TestCase_RetevisRT1)
Testing Retevis RT1 edges ... ok
test_settings (tests.TestCase_RetevisRT1)
Testing Retevis RT1 settings ... ok
test_banks (tests.TestCase_RetevisRT95)
Testing Retevis RT95 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT95)
Testing Retevis RT95 brute force ... ok
test_clone (tests.TestCase_RetevisRT95)
Testing Retevis RT95 clone ... ok
test_copy_all (tests.TestCase_RetevisRT95)
Testing Retevis RT95 copy all ... ok
test_detect (tests.TestCase_RetevisRT95)
Testing Retevis RT95 detect ... ok
test_edges (tests.TestCase_RetevisRT95)
Testing Retevis RT95 edges ... ok
test_settings (tests.TestCase_RetevisRT95)
Testing Retevis RT95 settings ... ok
test_banks (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E detect ... ok
test_edges (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E edges ... ok
test_settings (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E settings ... ok
test_banks (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode settings ... ok
test_banks (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 brute force ... ok
test_clone (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 clone ... ok
test_copy_all (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 copy all ... ok
test_detect (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 detect ... ok
test_edges (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 edges ... ok
test_settings (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 settings ... ok
test_banks (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A detect ... ok
test_edges (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A edges ... ok
test_settings (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A settings ... ok
test_banks (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E banks ... ok
test_brute_force (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E brute force ... ok
test_clone (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E clone ... ok
test_copy_all (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E copy all ... ok
test_detect (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E detect ... ok
test_edges (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E edges ... ok
test_settings (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E settings ... ok
test_banks (tests.TestCase_RetevisRT16)
Testing Retevis RT16 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT16)
Testing Retevis RT16 brute force ... ok
test_clone (tests.TestCase_RetevisRT16)
Testing Retevis RT16 clone ... ok
test_copy_all (tests.TestCase_RetevisRT16)
Testing Retevis RT16 copy all ... ok
test_detect (tests.TestCase_RetevisRT16)
Testing Retevis RT16 detect ... ok
test_edges (tests.TestCase_RetevisRT16)
Testing Retevis RT16 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT16)
Testing Retevis RT16 settings ... ok
test_banks (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D brute force ... ok
test_clone (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D copy all ... ok
test_detect (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D detect ... ok
test_edges (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D edges ... ok
test_settings (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 brute force ... ok
test_clone (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 clone ... ok
test_copy_all (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 copy all ... ok
test_detect (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 detect ... ok
test_edges (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 edges ... ok
test_settings (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RadtelT18)
Testing Radtel T18 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadtelT18)
Testing Radtel T18 brute force ... ok
test_clone (tests.TestCase_RadtelT18)
Testing Radtel T18 clone ... ok
test_copy_all (tests.TestCase_RadtelT18)
Testing Radtel T18 copy all ... ok
test_detect (tests.TestCase_RadtelT18)
Testing Radtel T18 detect ... ok
test_edges (tests.TestCase_RadtelT18)
Testing Radtel T18 edges ... ok
test_settings (tests.TestCase_RadtelT18)
Testing Radtel T18 settings ... ok
test_banks (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B detect ... ok
test_edges (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B edges ... ok
test_settings (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B settings ... ok
test_banks (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 detect ... ok
test_edges (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 edges ... ok
test_settings (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 settings ... ok
test_banks (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A brute force ... ok
test_clone (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A copy all ... ok
test_detect (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A detect ... ok
test_edges (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A edges ... ok
test_settings (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A settings ... ok
test_banks (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R banks ... ok
test_brute_force (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R brute force ... ok
test_clone (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R clone ... ok
test_copy_all (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R copy all ... ok
test_detect (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R detect ... ok
test_edges (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R edges ... ok
test_settings (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R settings ... ok
test_banks (tests.TestCase_RetevisRT21)
Testing Retevis RT21 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT21)
Testing Retevis RT21 brute force ... ok
test_clone (tests.TestCase_RetevisRT21)
Testing Retevis RT21 clone ... ok
test_copy_all (tests.TestCase_RetevisRT21)
Testing Retevis RT21 copy all ... ok
test_detect (tests.TestCase_RetevisRT21)
Testing Retevis RT21 detect ... ok
test_edges (tests.TestCase_RetevisRT21)
Testing Retevis RT21 edges ... ok
test_settings (tests.TestCase_RetevisRT21)
Testing Retevis RT21 settings ... ok
test_banks (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode settings ... ok
test_banks (tests.TestCase_IcomID51)
Testing Icom ID-51 banks ... ok
test_brute_force (tests.TestCase_IcomID51)
Testing Icom ID-51 brute force ... ok
test_clone (tests.TestCase_IcomID51)
Testing Icom ID-51 clone ... ok
test_copy_all (tests.TestCase_IcomID51)
Testing Icom ID-51 copy all ... ok
test_detect (tests.TestCase_IcomID51)
Testing Icom ID-51 detect ... ok
test_edges (tests.TestCase_IcomID51)
Testing Icom ID-51 edges ... ok
test_settings (tests.TestCase_IcomID51)
Testing Icom ID-51 settings ... ok
test_banks (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A brute force ... ok
test_clone (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A clone ... ok
test_copy_all (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A copy all ... ok
test_detect (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A detect ... ok
test_edges (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A edges ... ok
test_settings (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A settings ... ok
test_banks (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG brute force ... ok
test_clone (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG clone ... ok
test_copy_all (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG copy all ... ok
test_detect (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG detect ... ok
test_edges (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG edges ... ok
test_settings (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B detect ... ok
test_edges (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B edges ... ok
test_settings (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B settings ... ok
test_banks (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 detect ... ok
test_edges (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 edges ... ok
test_settings (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 settings ... ok
test_banks (tests.TestCase_RetevisRT22)
Testing Retevis RT22 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22)
Testing Retevis RT22 brute force ... ok
test_clone (tests.TestCase_RetevisRT22)
Testing Retevis RT22 clone ... ok
test_copy_all (tests.TestCase_RetevisRT22)
Testing Retevis RT22 copy all ... ok
test_detect (tests.TestCase_RetevisRT22)
Testing Retevis RT22 detect ... ok
test_edges (tests.TestCase_RetevisRT22)
Testing Retevis RT22 edges ... ok
test_settings (tests.TestCase_RetevisRT22)
Testing Retevis RT22 settings ... ok
test_banks (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 brute force ... ok
test_clone (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 clone ... ok
test_copy_all (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 copy all ... ok
test_detect (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 detect ... ok
test_edges (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 edges ... ok
test_settings (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode settings ... ok
test_banks (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus brute force ... ok
test_clone (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus copy all ... ok
test_detect (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus detect ... ok
test_edges (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus edges ... ok
test_settings (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus settings ... ok
test_banks (tests.TestCase_TYTTH350)
Testing TYT TH-350 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH350)
Testing TYT TH-350 brute force ... ok
test_clone (tests.TestCase_TYTTH350)
Testing TYT TH-350 clone ... ok
test_copy_all (tests.TestCase_TYTTH350)
Testing TYT TH-350 copy all ... ok
test_detect (tests.TestCase_TYTTH350)
Testing TYT TH-350 detect ... ok
test_edges (tests.TestCase_TYTTH350)
Testing TYT TH-350 edges ... ok
test_settings (tests.TestCase_TYTTH350)
Testing TYT TH-350 settings ... ok
test_banks (tests.TestCase_IcomIC208H)
Testing Icom IC-208H banks ... ok
test_brute_force (tests.TestCase_IcomIC208H)
Testing Icom IC-208H brute force ... ok
test_clone (tests.TestCase_IcomIC208H)
Testing Icom IC-208H clone ... ok
test_copy_all (tests.TestCase_IcomIC208H)
Testing Icom IC-208H copy all ... ok
test_detect (tests.TestCase_IcomIC208H)
Testing Icom IC-208H detect ... ok
test_edges (tests.TestCase_IcomIC208H)
Testing Icom IC-208H edges ... ok
test_settings (tests.TestCase_IcomIC208H)
Testing Icom IC-208H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D banks ... ok
test_brute_force (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D brute force ... ok
test_clone (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D clone ... ok
test_copy_all (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D copy all ... ok
test_detect (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D detect ... ok
test_edges (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D edges ... ok
test_settings (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D settings ... ok
test_banks (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS brute force ... ok
test_clone (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS clone ... ok
test_copy_all (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS copy all ... ok
test_detect (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS detect ... ok
test_edges (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS edges ... ok
test_settings (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS settings ... ok
test_banks (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 brute force ... ok
test_clone (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 clone ... ok
test_copy_all (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 copy all ... ok
test_detect (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 detect ... ok
test_edges (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 edges ... ok
test_settings (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 settings ... ok
test_banks (tests.TestCase_RetevisRA85)
Testing Retevis RA85 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRA85)
Testing Retevis RA85 brute force ... ok
test_clone (tests.TestCase_RetevisRA85)
Testing Retevis RA85 clone ... ok
test_copy_all (tests.TestCase_RetevisRA85)
Testing Retevis RA85 copy all ... ok
test_detect (tests.TestCase_RetevisRA85)
Testing Retevis RA85 detect ... ok
test_edges (tests.TestCase_RetevisRA85)
Testing Retevis RA85 edges ... ok
test_settings (tests.TestCase_RetevisRA85)
Testing Retevis RA85 settings ... ok
test_banks (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode settings ... ok
test_banks (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D brute force ... ok
test_clone (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D copy all ... ok
test_detect (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D detect ... ok
test_edges (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D edges ... ok
test_settings (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P brute force ... ok
test_clone (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P clone ... ok
test_copy_all (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P copy all ... ok
test_detect (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P detect ... ok
test_edges (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P edges ... ok
test_settings (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P settings ... ok
test_banks (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H brute force ... ok
test_clone (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H clone ... ok
test_copy_all (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H copy all ... ok
test_detect (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H detect ... ok
test_edges (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H edges ... ok
test_settings (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus banks ... ok
test_brute_force (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus brute force ... ok
test_clone (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus clone ... ok
test_copy_all (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus copy all ... ok
test_detect (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus detect ... ok
test_edges (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus edges ... ok
test_settings (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus settings ... ok
test_banks (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S brute force ... ok
test_clone (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S clone ... ok
test_copy_all (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S copy all ... ok
test_detect (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S detect ... ok
test_edges (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S settings ... ok
test_banks (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M brute force ... ok
test_clone (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M clone ... ok
test_copy_all (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M copy all ... ok
test_detect (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M detect ... ok
test_edges (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M edges ... ok
test_settings (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M settings ... ok
test_banks (tests.TestCase_RetevisRB15)
Testing Retevis RB15 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB15)
Testing Retevis RB15 brute force ... ok
test_clone (tests.TestCase_RetevisRB15)
Testing Retevis RB15 clone ... ok
test_copy_all (tests.TestCase_RetevisRB15)
Testing Retevis RB15 copy all ... ok
test_detect (tests.TestCase_RetevisRB15)
Testing Retevis RB15 detect ... ok
test_edges (tests.TestCase_RetevisRB15)
Testing Retevis RB15 edges ... ok
test_settings (tests.TestCase_RetevisRB15)
Testing Retevis RB15 settings ... ok
test_banks (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 brute force ... ok
test_clone (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 clone ... ok
test_copy_all (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 copy all ... ok
test_detect (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 detect ... ok
test_edges (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 edges ... ok
test_settings (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 settings ... ok
test_banks (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 banks ... ok
test_brute_force (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 brute force ... ok
test_clone (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 clone ... ok
test_copy_all (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 copy all ... ok
test_detect (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 detect ... ok
test_edges (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 edges ... ok
test_settings (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 settings ... ok
test_banks (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF brute force ... ok
test_clone (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF clone ... ok
test_copy_all (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF copy all ... ok
test_detect (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF detect ... ok
test_edges (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF edges ... ok
test_settings (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF settings ... ok
test_banks (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M brute force ... ok
test_clone (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M copy all ... ok
test_detect (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M detect ... ok
test_edges (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M edges ... ok
test_settings (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT23)
Testing Retevis RT23 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT23)
Testing Retevis RT23 brute force ... ok
test_clone (tests.TestCase_RetevisRT23)
Testing Retevis RT23 clone ... ok
test_copy_all (tests.TestCase_RetevisRT23)
Testing Retevis RT23 copy all ... ok
test_detect (tests.TestCase_RetevisRT23)
Testing Retevis RT23 detect ... ok
test_edges (tests.TestCase_RetevisRT23)
Testing Retevis RT23 edges ... ok
test_settings (tests.TestCase_RetevisRT23)
Testing Retevis RT23 settings ... ok
test_banks (tests.TestCase_IcomID800H)
Testing Icom ID-800H banks ... ok
test_brute_force (tests.TestCase_IcomID800H)
Testing Icom ID-800H brute force ... ok
test_clone (tests.TestCase_IcomID800H)
Testing Icom ID-800H clone ... ok
test_copy_all (tests.TestCase_IcomID800H)
Testing Icom ID-800H copy all ... ok
test_detect (tests.TestCase_IcomID800H)
Testing Icom ID-800H detect ... ok
test_edges (tests.TestCase_IcomID800H)
Testing Icom ID-800H edges ... ok
test_settings (tests.TestCase_IcomID800H)
Testing Icom ID-800H settings ... ok
test_banks (tests.TestCase_RetevisRB17)
Testing Retevis RB17 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17)
Testing Retevis RB17 brute force ... ok
test_clone (tests.TestCase_RetevisRB17)
Testing Retevis RB17 clone ... ok
test_copy_all (tests.TestCase_RetevisRB17)
Testing Retevis RB17 copy all ... ok
test_detect (tests.TestCase_RetevisRB17)
Testing Retevis RB17 detect ... ok
test_edges (tests.TestCase_RetevisRB17)
Testing Retevis RB17 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17)
Testing Retevis RB17 settings ... ok
test_banks (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 banks ... ok
test_brute_force (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 brute force ... ok
test_clone (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 copy all ... ok
test_detect (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 detect ... ok
test_edges (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 edges ... ok
test_settings (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 settings ... ok
test_banks (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 banks ... ok
test_brute_force (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 brute force ... ok
test_clone (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 clone ... ok
test_copy_all (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 copy all ... ok
test_detect (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 detect ... ok
test_edges (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 edges ... ok
test_settings (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 settings ... ok
test_banks (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF brute force ... ok
test_clone (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF clone ... ok
test_copy_all (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF copy all ... ok
test_detect (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF detect ... ok
test_edges (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF edges ... ok
test_settings (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF settings ... ok
test_banks (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M brute force ... ok
test_clone (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M copy all ... ok
test_detect (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M detect ... ok
test_edges (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M edges ... ok
test_settings (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A brute force ... ok
test_clone (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A clone ... ok
test_copy_all (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A copy all ... ok
test_detect (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A detect ... ok
test_edges (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A settings ... ok
test_banks (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 brute force ... ok
test_clone (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 clone ... ok
test_copy_all (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 copy all ... ok
test_detect (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 detect ... ok
test_edges (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 edges ... ok
test_settings (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 settings ... ok
test_banks (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 banks ... ok
test_brute_force (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 brute force ... ok
test_clone (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 clone ... ok
test_copy_all (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 copy all ... ok
test_detect (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 detect ... ok
test_edges (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 edges ... ok
test_settings (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV brute force ... ok
test_clone (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV clone ... ok
test_copy_all (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV copy all ... ok
test_detect (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV detect ... ok
test_edges (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV edges ... ok
test_settings (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV settings ... ok
test_banks (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 brute force ... ok
test_clone (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 clone ... ok
test_copy_all (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 copy all ... ok
test_detect (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 detect ... ok
test_edges (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 edges ... ok
test_settings (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 settings ... ok
test_banks (tests.TestCase_IcomID880H)
Testing Icom ID-880H banks ... ok
test_brute_force (tests.TestCase_IcomID880H)
Testing Icom ID-880H brute force ... ok
test_clone (tests.TestCase_IcomID880H)
Testing Icom ID-880H clone ... ok
test_copy_all (tests.TestCase_IcomID880H)
Testing Icom ID-880H copy all ... ok
test_detect (tests.TestCase_IcomID880H)
Testing Icom ID-880H detect ... ok
test_edges (tests.TestCase_IcomID880H)
Testing Icom ID-880H edges ... ok
test_settings (tests.TestCase_IcomID880H)
Testing Icom ID-880H settings ... ok
test_banks (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P brute force ... ok
test_clone (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P clone ... ok
test_copy_all (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P copy all ... ok
test_detect (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P detect ... ok
test_edges (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P settings ... ok
test_banks (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 detect ... ok
test_edges (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 edges ... ok
test_settings (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 banks ... ok
test_brute_force (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 brute force ... ok
test_clone (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 clone ... ok
test_copy_all (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 copy all ... ok
test_detect (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 detect ... ok
test_edges (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 edges ... ok
test_settings (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 settings ... ok
test_banks (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 brute force ... ok
test_clone (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 clone ... ok
test_copy_all (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 copy all ... ok
test_detect (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 detect ... ok
test_edges (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 edges ... ok
test_settings (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 settings ... ok
test_banks (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M brute force ... ok
test_clone (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M clone ... ok
test_copy_all (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M copy all ... ok
test_detect (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M detect ... ok
test_edges (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M edges ... ok
test_settings (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND brute force ... ok
test_clone (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND clone ... ok
test_copy_all (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND copy all ... ok
test_detect (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND detect ... ok
test_edges (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND edges ... ok
test_settings (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND settings ... ok
test_banks (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V brute force ... ok
test_clone (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V clone ... ok
test_copy_all (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V copy all ... ok
test_detect (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V detect ... ok
test_edges (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V settings ... ok
test_banks (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 banks ... ok
test_brute_force (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 brute force ... ok
test_clone (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 clone ... ok
test_copy_all (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 copy all ... ok
test_detect (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 detect ... ok
test_edges (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 edges ... ok
test_settings (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R detect ... ok
test_edges (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R edges ... ok
test_settings (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S brute force ... ok
test_clone (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S clone ... ok
test_copy_all (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S copy all ... ok
test_detect (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S detect ... ok
test_edges (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S edges ... ok
test_settings (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S settings ... ok
test_banks (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M brute force ... ok
test_clone (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M clone ... ok
test_copy_all (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M copy all ... ok
test_detect (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M detect ... ok
test_edges (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M edges ... ok
test_settings (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M settings ... ok
test_banks (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) detect ... ok
test_edges (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) edges ... ok
test_settings (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) settings ... ok
test_banks (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D banks ... ok
test_brute_force (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D brute force ... ok
test_clone (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D clone ... ok
test_copy_all (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D copy all ... ok
test_detect (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D detect ... ok
test_edges (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D edges ... ok
test_settings (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D settings ... ok
test_banks (tests.TestCase_RetevisRB18)
Testing Retevis RB18 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB18)
Testing Retevis RB18 brute force ... ok
test_clone (tests.TestCase_RetevisRB18)
Testing Retevis RB18 clone ... ok
test_copy_all (tests.TestCase_RetevisRB18)
Testing Retevis RB18 copy all ... ok
test_detect (tests.TestCase_RetevisRB18)
Testing Retevis RB18 detect ... ok
test_edges (tests.TestCase_RetevisRB18)
Testing Retevis RB18 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB18)
Testing Retevis RB18 settings ... ok
test_banks (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR banks ... ok
test_brute_force (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR brute force ... ok
test_clone (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR clone ... ok
test_copy_all (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR copy all ... ok
test_detect (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR detect ... ok
test_edges (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR edges ... ok
test_settings (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR settings ... ok
test_banks (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 brute force ... ok
test_clone (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 clone ... ok
test_copy_all (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 copy all ... ok
test_detect (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 detect ... ok
test_edges (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 edges ... ok
test_settings (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 settings ... ok
test_banks (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 brute force ... ok
test_clone (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 clone ... ok
test_copy_all (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 copy all ... ok
test_detect (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 detect ... ok
test_edges (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 edges ... ok
test_settings (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 settings ... ok
test_banks (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R banks ... ok
test_brute_force (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R brute force ... ok
test_clone (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R clone ... ok
test_copy_all (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R copy all ... ok
test_detect (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R detect ... ok
test_edges (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R edges ... ok
test_settings (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R settings ... ok
test_banks (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 brute force ... ok
test_clone (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 copy all ... ok
test_detect (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 detect ... ok
test_edges (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 edges ... ok
test_settings (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 settings ... ok
test_banks (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE banks ... ok
test_brute_force (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE brute force ... ok
test_clone (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE clone ... ok
test_copy_all (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE copy all ... ok
test_detect (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE detect ... ok
test_edges (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE edges ... ok
test_settings (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE settings ... ok
test_banks (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) detect ... ok
test_edges (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) edges ... ok
test_settings (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) settings ... ok
test_banks (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R banks ... ok
test_brute_force (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R brute force ... ok
test_clone (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R clone ... ok
test_copy_all (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R copy all ... ok
test_detect (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R detect ... ok
test_edges (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R edges ... ok
test_settings (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R settings ... ok
test_banks (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 banks ... ok
test_brute_force (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 brute force ... ok
test_clone (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 copy all ... ok
test_detect (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 detect ... ok
test_edges (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 edges ... ok
test_settings (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 settings ... skipped 'Settings not supported'

----------------------------------------------------------------------
Ran 1358 tests in 543.661s

OK (skipped=209)

struct memory {
  bbcd rx_freq[4];
  bbcd tx_freq[4];
  lbcd rx_tone[2];
  lbcd tx_tone[2];

  u8 unknown10:5,
     highpower:1,
     unknown11:2;
  u8 unknown20:4,
     narrow:1,
     unknown21:3;
  u8 unknown31:1,
     scanadd:1,
     unknown32:6;
  u8 unknown4;
};

struct name {
  char name[7];
};

#seekto 0x0010;
struct memory channels[128];

#seekto 0x08C0;
struct name names[128];

#seekto 0x2020;
struct memory vfo1;
struct memory vfo2;

style create: /chirp/.tox/style
style installdeps: pep8==1.6.2, future
style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
style run-test-pre: PYTHONHASHSEED='3428868326'
style run-test: commands[0] | python ./tools/cpep8.py
___________________________________ summary ____________________________________
  unit: commands succeeded
  driver: commands succeeded
  style: commands succeeded
  congratulations :)
Email was triggered for: Success
Sending email for trigger: Success

More information about the chirp_devel mailing list