[chirp_devel] Build test results: Successful

Build System
Tue Feb 1 16:05:00 PST 2022 

Tested changes:

[Jim Unroe <rock.unroe at gmail.com>] [FRS-B1] Add BTECH FRS-B1 [patch 2 of 2]

This patch adds support for the Baofeng Tech FRS-B2.

related to #9734

[Jim Unroe <rock.unroe at gmail.com>] [FRS-B1] Driver Maintenance: radtel_t18.py [patch 1 of 2]

This patch reorders some of the settings to make it easier to add support
for additional radios. No features have been added to or removed from any of
the currently supported radio models.

related to #9734

[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281

[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141

[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281

[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292

[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269

[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231

[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212

[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214

[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117

[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181

[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176

[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172

[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels

[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122

[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166

[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163

[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145



Full log:

[...truncated 1163 lines...]
test_copy_all (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV copy all ... ok
test_detect (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV detect ... ok
test_edges (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV edges ... ok
test_settings (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV settings ... ok
test_banks (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R brute force ... ok
test_clone (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R clone ... ok
test_copy_all (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R copy all ... ok
test_detect (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R detect ... ok
test_edges (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R edges ... ok
test_settings (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R settings ... ok
test_banks (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H banks ... ok
test_brute_force (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H brute force ... ok
test_clone (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H clone ... ok
test_copy_all (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H copy all ... ok
test_detect (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H detect ... ok
test_edges (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H edges ... ok
test_settings (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H settings ... ok
test_banks (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K brute force ... ok
test_clone (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K clone ... ok
test_copy_all (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K copy all ... ok
test_detect (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K detect ... ok
test_edges (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K edges ... ok
test_settings (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K settings ... ok
test_banks (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D detect ... ok
test_edges (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D edges ... ok
test_settings (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D settings ... ok
test_banks (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E banks ... ok
test_brute_force (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E brute force ... ok
test_clone (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E clone ... ok
test_copy_all (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E copy all ... ok
test_detect (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E detect ... ok
test_edges (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E edges ... ok
test_settings (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E settings ... ok
test_banks (tests.TestCase_RetevisRB85)
Testing Retevis RB85 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB85)
Testing Retevis RB85 brute force ... ok
test_clone (tests.TestCase_RetevisRB85)
Testing Retevis RB85 clone ... ok
test_copy_all (tests.TestCase_RetevisRB85)
Testing Retevis RB85 copy all ... ok
test_detect (tests.TestCase_RetevisRB85)
Testing Retevis RB85 detect ... ok
test_edges (tests.TestCase_RetevisRB85)
Testing Retevis RB85 edges ... ok
test_settings (tests.TestCase_RetevisRB85)
Testing Retevis RB85 settings ... ok
test_banks (tests.TestCase_RetevisRT95)
Testing Retevis RT95 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT95)
Testing Retevis RT95 brute force ... ok
test_clone (tests.TestCase_RetevisRT95)
Testing Retevis RT95 clone ... ok
test_copy_all (tests.TestCase_RetevisRT95)
Testing Retevis RT95 copy all ... ok
test_detect (tests.TestCase_RetevisRT95)
Testing Retevis RT95 detect ... ok
test_edges (tests.TestCase_RetevisRT95)
Testing Retevis RT95 edges ... ok
test_settings (tests.TestCase_RetevisRT95)
Testing Retevis RT95 settings ... ok
test_banks (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) brute force ... ok
test_clone (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) clone ... ok
test_copy_all (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) copy all ... ok
test_detect (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) detect ... ok
test_edges (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) edges ... ok
test_settings (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) settings ... ok
test_banks (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII banks ... ok
test_brute_force (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII brute force ... ok
test_clone (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII clone ... ok
test_copy_all (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII copy all ... ok
test_detect (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII detect ... ok
test_edges (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII edges ... ok
test_settings (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII settings ... ok
test_banks (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R brute force ... ok
test_clone (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R clone ... ok
test_copy_all (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R copy all ... ok
test_detect (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R detect ... ok
test_edges (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R edges ... ok
test_settings (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R settings ... ok
test_banks (tests.TestCase_QYTKT8R)
Testing QYT KT-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT8R)
Testing QYT KT-8R brute force ... ok
test_clone (tests.TestCase_QYTKT8R)
Testing QYT KT-8R clone ... ok
test_copy_all (tests.TestCase_QYTKT8R)
Testing QYT KT-8R copy all ... ok
test_detect (tests.TestCase_QYTKT8R)
Testing QYT KT-8R detect ... ok
test_edges (tests.TestCase_QYTKT8R)
Testing QYT KT-8R edges ... ok
test_settings (tests.TestCase_QYTKT8R)
Testing QYT KT-8R settings ... ok
test_banks (tests.TestCase_IcomICP7)
Testing Icom IC-P7 banks ... ok
test_brute_force (tests.TestCase_IcomICP7)
Testing Icom IC-P7 brute force ... ok
test_clone (tests.TestCase_IcomICP7)
Testing Icom IC-P7 clone ... ok
test_copy_all (tests.TestCase_IcomICP7)
Testing Icom IC-P7 copy all ... ok
test_detect (tests.TestCase_IcomICP7)
Testing Icom IC-P7 detect ... ok
test_edges (tests.TestCase_IcomICP7)
Testing Icom IC-P7 edges ... ok
test_settings (tests.TestCase_IcomICP7)
Testing Icom IC-P7 settings ... ok
test_banks (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D brute force ... ok
test_clone (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D copy all ... ok
test_detect (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D detect ... ok
test_edges (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D edges ... ok
test_settings (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus detect ... ok
test_edges (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus edges ... ok
test_settings (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus settings ... ok
test_banks (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 brute force ... ok
test_clone (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 clone ... ok
test_copy_all (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 copy all ... ok
test_detect (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 detect ... ok
test_edges (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 edges ... ok
test_settings (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R banks ... ok
test_brute_force (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R brute force ... ok
test_clone (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R clone ... ok
test_copy_all (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R copy all ... ok
test_detect (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R detect ... ok
test_edges (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R edges ... ok
test_settings (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R settings ... ok
test_banks (tests.TestCase_RetevisRT1)
Testing Retevis RT1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT1)
Testing Retevis RT1 brute force ... ok
test_clone (tests.TestCase_RetevisRT1)
Testing Retevis RT1 clone ... ok
test_copy_all (tests.TestCase_RetevisRT1)
Testing Retevis RT1 copy all ... ok
test_detect (tests.TestCase_RetevisRT1)
Testing Retevis RT1 detect ... ok
test_edges (tests.TestCase_RetevisRT1)
Testing Retevis RT1 edges ... ok
test_settings (tests.TestCase_RetevisRT1)
Testing Retevis RT1 settings ... ok
test_banks (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G banks ... ok
test_brute_force (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G brute force ... ok
test_clone (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G clone ... ok
test_copy_all (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G copy all ... ok
test_detect (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G detect ... ok
test_edges (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G edges ... ok
test_settings (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G settings ... ok
test_banks (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R brute force ... ok
test_clone (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R clone ... ok
test_copy_all (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R copy all ... ok
test_detect (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R detect ... ok
test_edges (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R edges ... ok
test_settings (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R settings ... ok
test_banks (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D brute force ... ok
test_clone (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D clone ... ok
test_copy_all (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D copy all ... ok
test_detect (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D detect ... ok
test_edges (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D edges ... ok
test_settings (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D settings ... ok
test_banks (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A brute force ... ok
test_clone (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A clone ... ok
test_copy_all (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A copy all ... ok
test_detect (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A detect ... ok
test_edges (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A edges ... ok
test_settings (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A settings ... ok
test_banks (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV brute force ... ok
test_clone (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV clone ... ok
test_copy_all (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV copy all ... ok
test_detect (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV detect ... ok
test_edges (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV edges ... ok
test_settings (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV settings ... ok
test_banks (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E detect ... ok
test_edges (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E edges ... ok
test_settings (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E settings ... ok
test_banks (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A brute force ... ok
test_clone (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A clone ... ok
test_copy_all (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A copy all ... ok
test_detect (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A detect ... ok
test_edges (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A edges ... ok
test_settings (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A settings ... ok
test_banks (tests.TestCase_RetevisRT16)
Testing Retevis RT16 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT16)
Testing Retevis RT16 brute force ... ok
test_clone (tests.TestCase_RetevisRT16)
Testing Retevis RT16 clone ... ok
test_copy_all (tests.TestCase_RetevisRT16)
Testing Retevis RT16 copy all ... ok
test_detect (tests.TestCase_RetevisRT16)
Testing Retevis RT16 detect ... ok
test_edges (tests.TestCase_RetevisRT16)
Testing Retevis RT16 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT16)
Testing Retevis RT16 settings ... ok
test_banks (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 banks ... ok
test_brute_force (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 brute force ... ok
test_clone (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 clone ... ok
test_copy_all (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 copy all ... ok
test_detect (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 detect ... ok
test_edges (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 edges ... ok
test_settings (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 settings ... ok
test_banks (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 brute force ... ok
test_clone (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 clone ... ok
test_copy_all (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 copy all ... ok
test_detect (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 detect ... ok
test_edges (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 edges ... ok
test_settings (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 settings ... ok
test_banks (tests.TestCase_IcomICT70)
Testing Icom IC-T70 banks ... ok
test_brute_force (tests.TestCase_IcomICT70)
Testing Icom IC-T70 brute force ... ok
test_clone (tests.TestCase_IcomICT70)
Testing Icom IC-T70 clone ... ok
test_copy_all (tests.TestCase_IcomICT70)
Testing Icom IC-T70 copy all ... ok
test_detect (tests.TestCase_IcomICT70)
Testing Icom IC-T70 detect ... ok
test_edges (tests.TestCase_IcomICT70)
Testing Icom IC-T70 edges ... ok
test_settings (tests.TestCase_IcomICT70)
Testing Icom IC-T70 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D brute force ... ok
test_clone (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D clone ... ok
test_copy_all (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D copy all ... ok
test_detect (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D detect ... ok
test_edges (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D edges ... ok
test_settings (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D settings ... ok
test_banks (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D banks ... ok
test_brute_force (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D brute force ... ok
test_clone (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D clone ... ok
test_copy_all (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D copy all ... ok
test_detect (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D detect ... ok
test_edges (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D edges ... ok
test_settings (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D settings ... ok
test_banks (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 brute force ... ok
test_clone (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 copy all ... ok
test_detect (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 detect ... ok
test_edges (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 edges ... ok
test_settings (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 settings ... ok
test_banks (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R brute force ... ok
test_clone (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R clone ... ok
test_copy_all (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R copy all ... ok
test_detect (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R detect ... ok
test_edges (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R edges ... ok
test_settings (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R settings ... ok
test_banks (tests.TestCase_TYTTH350)
Testing TYT TH-350 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH350)
Testing TYT TH-350 brute force ... ok
test_clone (tests.TestCase_TYTTH350)
Testing TYT TH-350 clone ... ok
test_copy_all (tests.TestCase_TYTTH350)
Testing TYT TH-350 copy all ... ok
test_detect (tests.TestCase_TYTTH350)
Testing TYT TH-350 detect ... ok
test_edges (tests.TestCase_TYTTH350)
Testing TYT TH-350 edges ... ok
test_settings (tests.TestCase_TYTTH350)
Testing TYT TH-350 settings ... ok
test_banks (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus brute force ... ok
test_clone (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus copy all ... ok
test_detect (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus detect ... ok
test_edges (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus edges ... ok
test_settings (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus settings ... ok
test_banks (tests.TestCase_RetevisRT21)
Testing Retevis RT21 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT21)
Testing Retevis RT21 brute force ... ok
test_clone (tests.TestCase_RetevisRT21)
Testing Retevis RT21 clone ... ok
test_copy_all (tests.TestCase_RetevisRT21)
Testing Retevis RT21 copy all ... ok
test_detect (tests.TestCase_RetevisRT21)
Testing Retevis RT21 detect ... ok
test_edges (tests.TestCase_RetevisRT21)
Testing Retevis RT21 edges ... ok
test_settings (tests.TestCase_RetevisRT21)
Testing Retevis RT21 settings ... ok
test_banks (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 brute force ... ok
test_clone (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 clone ... ok
test_copy_all (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 copy all ... ok
test_detect (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 detect ... ok
test_edges (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 edges ... ok
test_settings (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H brute force ... ok
test_clone (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H clone ... ok
test_copy_all (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H copy all ... ok
test_detect (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H detect ... ok
test_edges (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H edges ... ok
test_settings (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 banks ... ok
test_brute_force (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 brute force ... ok
test_clone (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 clone ... ok
test_copy_all (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 copy all ... ok
test_detect (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 detect ... ok
test_edges (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 edges ... ok
test_settings (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 settings ... ok
test_banks (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 brute force ... ok
test_clone (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 clone ... ok
test_copy_all (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 copy all ... ok
test_detect (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 detect ... ok
test_edges (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 edges ... ok
test_settings (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 settings ... ok
test_banks (tests.TestCase_RetevisRT22)
Testing Retevis RT22 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22)
Testing Retevis RT22 brute force ... ok
test_clone (tests.TestCase_RetevisRT22)
Testing Retevis RT22 clone ... ok
test_copy_all (tests.TestCase_RetevisRT22)
Testing Retevis RT22 copy all ... ok
test_detect (tests.TestCase_RetevisRT22)
Testing Retevis RT22 detect ... ok
test_edges (tests.TestCase_RetevisRT22)
Testing Retevis RT22 edges ... ok
test_settings (tests.TestCase_RetevisRT22)
Testing Retevis RT22 settings ... ok
test_banks (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M brute force ... ok
test_clone (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M clone ... ok
test_copy_all (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M copy all ... ok
test_detect (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M detect ... ok
test_edges (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M edges ... ok
test_settings (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M settings ... ok
test_banks (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P brute force ... ok
test_clone (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P clone ... ok
test_copy_all (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P copy all ... ok
test_detect (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P detect ... ok
test_edges (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P edges ... ok
test_settings (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P settings ... ok
test_banks (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G banks ... ok
test_brute_force (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G brute force ... ok
test_clone (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G clone ... ok
test_copy_all (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G copy all ... ok
test_detect (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G detect ... ok
test_edges (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G edges ... ok
test_settings (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G settings ... ok
test_banks (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus brute force ... ok
test_clone (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus clone ... ok
test_copy_all (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus copy all ... ok
test_detect (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus detect ... ok
test_edges (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus edges ... ok
test_settings (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus settings ... ok
test_banks (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R brute force ... ok
test_clone (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R clone ... ok
test_copy_all (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R copy all ... ok
test_detect (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R detect ... ok
test_edges (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R edges ... ok
test_settings (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R settings ... ok
test_banks (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A brute force ... ok
test_clone (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A clone ... ok
test_copy_all (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A copy all ... ok
test_detect (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A detect ... ok
test_edges (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A edges ... ok
test_settings (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS brute force ... ok
test_clone (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS clone ... ok
test_copy_all (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS copy all ... ok
test_detect (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS detect ... ok
test_edges (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS edges ... ok
test_settings (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS settings ... ok
test_banks (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 banks ... ok
test_brute_force (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 brute force ... ok
test_clone (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 clone ... ok
test_copy_all (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 copy all ... ok
test_detect (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 detect ... ok
test_edges (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 edges ... ok
test_settings (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 brute force ... ok
test_clone (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 clone ... ok
test_copy_all (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 copy all ... ok
test_detect (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 detect ... ok
test_edges (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 edges ... ok
test_settings (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 settings ... ok
test_banks (tests.TestCase_RadioddityR2)
Testing Radioddity R2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityR2)
Testing Radioddity R2 brute force ... ok
test_clone (tests.TestCase_RadioddityR2)
Testing Radioddity R2 clone ... ok
test_copy_all (tests.TestCase_RadioddityR2)
Testing Radioddity R2 copy all ... ok
test_detect (tests.TestCase_RadioddityR2)
Testing Radioddity R2 detect ... ok
test_edges (tests.TestCase_RadioddityR2)
Testing Radioddity R2 edges ... ok
test_settings (tests.TestCase_RadioddityR2)
Testing Radioddity R2 settings ... ok
test_banks (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M brute force ... ok
test_clone (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M copy all ... ok
test_detect (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M detect ... ok
test_edges (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M edges ... ok
test_settings (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 banks ... ok
test_brute_force (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 brute force ... ok
test_clone (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 copy all ... ok
test_detect (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 detect ... ok
test_edges (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 edges ... ok
test_settings (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 settings ... ok
test_banks (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 detect ... ok
test_edges (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 edges ... ok
test_settings (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 settings ... ok
test_banks (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 banks ... ok
test_brute_force (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 brute force ... ok
test_clone (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 clone ... ok
test_copy_all (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 copy all ... ok
test_detect (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 detect ... ok
test_edges (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 edges ... ok
test_settings (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S brute force ... ok
test_clone (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S clone ... ok
test_copy_all (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S copy all ... ok
test_detect (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S detect ... ok
test_edges (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S settings ... ok
test_banks (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV brute force ... ok
test_clone (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV clone ... ok
test_copy_all (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV copy all ... ok
test_detect (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV detect ... ok
test_edges (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV edges ... ok
test_settings (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV settings ... ok
test_banks (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 brute force ... ok
test_clone (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 clone ... ok
test_copy_all (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 copy all ... ok
test_detect (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 detect ... ok
test_edges (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 settings ... ok
test_banks (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G brute force ... ok
test_clone (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G clone ... ok
test_copy_all (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G copy all ... ok
test_detect (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G detect ... ok
test_edges (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G edges ... ok
test_settings (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G settings ... ok
test_banks (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 banks ... ok
test_brute_force (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 brute force ... ok
test_clone (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 clone ... ok
test_copy_all (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 copy all ... ok
test_detect (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 detect ... ok
test_edges (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 edges ... ok
test_settings (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 settings ... ok
test_banks (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M brute force ... ok
test_clone (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M copy all ... ok
test_detect (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M detect ... ok
test_edges (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M edges ... ok
test_settings (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT23)
Testing Retevis RT23 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT23)
Testing Retevis RT23 brute force ... ok
test_clone (tests.TestCase_RetevisRT23)
Testing Retevis RT23 clone ... ok
test_copy_all (tests.TestCase_RetevisRT23)
Testing Retevis RT23 copy all ... ok
test_detect (tests.TestCase_RetevisRT23)
Testing Retevis RT23 detect ... ok
test_edges (tests.TestCase_RetevisRT23)
Testing Retevis RT23 edges ... ok
test_settings (tests.TestCase_RetevisRT23)
Testing Retevis RT23 settings ... ok
test_banks (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 brute force ... ok
test_clone (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 clone ... ok
test_copy_all (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 copy all ... ok
test_detect (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 detect ... ok
test_edges (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 edges ... ok
test_settings (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 settings ... ok
test_banks (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 brute force ... ok
test_clone (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 clone ... ok
test_copy_all (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 copy all ... ok
test_detect (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 detect ... ok
test_edges (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 edges ... ok
test_settings (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 settings ... ok
test_banks (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A brute force ... ok
test_clone (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A clone ... ok
test_copy_all (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A copy all ... ok
test_detect (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A detect ... ok
test_edges (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A edges ... ok
test_settings (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A detect ... ok
test_edges (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A edges ... ok
test_settings (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A settings ... ok
test_banks (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 detect ... ok
test_edges (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 edges ... ok
test_settings (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 settings ... ok
test_banks (tests.TestCase_RadtelT18)
Testing Radtel T18 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadtelT18)
Testing Radtel T18 brute force ... ok
test_clone (tests.TestCase_RadtelT18)
Testing Radtel T18 clone ... ok
test_copy_all (tests.TestCase_RadtelT18)
Testing Radtel T18 copy all ... ok
test_detect (tests.TestCase_RadtelT18)
Testing Radtel T18 detect ... ok
test_edges (tests.TestCase_RadtelT18)
Testing Radtel T18 edges ... ok
test_settings (tests.TestCase_RadtelT18)
Testing Radtel T18 settings ... ok
test_banks (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 detect ... ok
test_edges (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 edges ... ok
test_settings (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 settings ... ok
test_banks (tests.TestCase_RetevisRT26)
Testing Retevis RT26 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT26)
Testing Retevis RT26 brute force ... ok
test_clone (tests.TestCase_RetevisRT26)
Testing Retevis RT26 clone ... ok
test_copy_all (tests.TestCase_RetevisRT26)
Testing Retevis RT26 copy all ... ok
test_detect (tests.TestCase_RetevisRT26)
Testing Retevis RT26 detect ... ok
test_edges (tests.TestCase_RetevisRT26)
Testing Retevis RT26 edges ... ok
test_settings (tests.TestCase_RetevisRT26)
Testing Retevis RT26 settings ... ok
test_banks (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 banks ... ok
test_brute_force (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 brute force ... ok
test_clone (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 clone ... ok
test_copy_all (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 copy all ... ok
test_detect (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 detect ... ok
test_edges (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 edges ... ok
test_settings (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND brute force ... ok
test_clone (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND clone ... ok
test_copy_all (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND copy all ... ok
test_detect (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND detect ... ok
test_edges (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND edges ... ok
test_settings (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND settings ... ok
test_banks (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E brute force ... ok
test_clone (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E clone ... ok
test_copy_all (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E copy all ... ok
test_detect (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E detect ... ok
test_edges (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E edges ... ok
test_settings (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 detect ... ok
test_edges (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 edges ... ok
test_settings (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B detect ... ok
test_edges (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B edges ... ok
test_settings (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B settings ... ok
test_banks (tests.TestCase_RetevisRT622)
Testing Retevis RT622 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT622)
Testing Retevis RT622 brute force ... ok
test_clone (tests.TestCase_RetevisRT622)
Testing Retevis RT622 clone ... ok
test_copy_all (tests.TestCase_RetevisRT622)
Testing Retevis RT622 copy all ... ok
test_detect (tests.TestCase_RetevisRT622)
Testing Retevis RT622 detect ... ok
test_edges (tests.TestCase_RetevisRT622)
Testing Retevis RT622 edges ... ok
test_settings (tests.TestCase_RetevisRT622)
Testing Retevis RT622 settings ... ok
test_banks (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 detect ... ok
test_edges (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 edges ... ok
test_settings (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 settings ... ok
test_banks (tests.TestCase_RetevisRB17)
Testing Retevis RB17 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17)
Testing Retevis RB17 brute force ... ok
test_clone (tests.TestCase_RetevisRB17)
Testing Retevis RB17 clone ... ok
test_copy_all (tests.TestCase_RetevisRB17)
Testing Retevis RB17 copy all ... ok
test_detect (tests.TestCase_RetevisRB17)
Testing Retevis RB17 detect ... ok
test_edges (tests.TestCase_RetevisRB17)
Testing Retevis RB17 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17)
Testing Retevis RB17 settings ... ok
test_banks (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) detect ... ok
test_edges (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) edges ... ok
test_settings (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) settings ... ok
test_banks (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R detect ... ok
test_edges (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R edges ... ok
test_settings (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D banks ... ok
test_brute_force (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D brute force ... ok
test_clone (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D clone ... ok
test_copy_all (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D copy all ... ok
test_detect (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D detect ... ok
test_edges (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D edges ... ok
test_settings (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D settings ... ok
test_banks (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 detect ... ok
test_edges (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 settings ... ok
test_banks (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A brute force ... ok
test_clone (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A clone ... ok
test_copy_all (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A copy all ... ok
test_detect (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A detect ... ok
test_edges (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A settings ... ok
test_banks (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR banks ... ok
test_brute_force (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR brute force ... ok
test_clone (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR clone ... ok
test_copy_all (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR copy all ... ok
test_detect (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR detect ... ok
test_edges (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR edges ... ok
test_settings (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR settings ... ok
test_banks (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode settings ... ok
test_banks (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 brute force ... ok
test_clone (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 clone ... ok
test_copy_all (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 copy all ... ok
test_detect (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 detect ... ok
test_edges (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 edges ... ok
test_settings (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 settings ... ok
test_banks (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 brute force ... ok
test_clone (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 copy all ... ok
test_detect (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 detect ... ok
test_edges (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 edges ... ok
test_settings (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 settings ... ok
test_banks (tests.TestCase_IcomID31A)
Testing Icom ID-31A banks ... ok
test_brute_force (tests.TestCase_IcomID31A)
Testing Icom ID-31A brute force ... ok
test_clone (tests.TestCase_IcomID31A)
Testing Icom ID-31A clone ... ok
test_copy_all (tests.TestCase_IcomID31A)
Testing Icom ID-31A copy all ... ok
test_detect (tests.TestCase_IcomID31A)
Testing Icom ID-31A detect ... ok
test_edges (tests.TestCase_IcomID31A)
Testing Icom ID-31A edges ... ok
test_settings (tests.TestCase_IcomID31A)
Testing Icom ID-31A settings ... ok
test_banks (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V brute force ... ok
test_clone (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V clone ... ok
test_copy_all (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V copy all ... ok
test_detect (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V detect ... ok
test_edges (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V settings ... ok
test_banks (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 brute force ... ok
test_clone (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 clone ... ok
test_copy_all (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 copy all ... ok
test_detect (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 detect ... ok
test_edges (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 edges ... ok
test_settings (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 settings ... ok
test_banks (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R banks ... ok
test_brute_force (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R brute force ... ok
test_clone (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R clone ... ok
test_copy_all (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R copy all ... ok
test_detect (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R detect ... ok
test_edges (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R edges ... ok
test_settings (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R settings ... ok
test_banks (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 brute force ... ok
test_clone (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 copy all ... ok
test_detect (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 detect ... ok
test_edges (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 edges ... ok
test_settings (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 settings ... ok
test_banks (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 brute force ... ok
test_clone (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 copy all ... ok
test_detect (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 detect ... ok
test_edges (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 edges ... ok
test_settings (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 settings ... ok
test_banks (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode settings ... ok
test_banks (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE banks ... ok
test_brute_force (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE brute force ... ok
test_clone (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE clone ... ok
test_copy_all (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE copy all ... ok
test_detect (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE detect ... ok
test_edges (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE edges ... ok
test_settings (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE settings ... ok
test_banks (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M brute force ... ok
test_clone (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M clone ... ok
test_copy_all (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M copy all ... ok
test_detect (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M detect ... ok
test_edges (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M edges ... ok
test_settings (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 detect ... ok
test_edges (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 edges ... ok
test_settings (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 settings ... ok
test_banks (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 brute force ... ok
test_clone (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 clone ... ok
test_copy_all (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 copy all ... ok
test_detect (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 detect ... ok
test_edges (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 edges ... ok
test_settings (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 settings ... ok
test_banks (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) detect ... ok
test_edges (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) edges ... ok
test_settings (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) settings ... ok
test_banks (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode settings ... ok
test_banks (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R banks ... ok
test_brute_force (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R brute force ... ok
test_clone (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R clone ... ok
test_copy_all (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R copy all ... ok
test_detect (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R detect ... ok
test_edges (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R edges ... ok
test_settings (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R settings ... ok
test_banks (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 banks ... ok
test_brute_force (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 brute force ... ok
test_clone (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 copy all ... ok
test_detect (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 detect ... ok
test_edges (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 edges ... ok
test_settings (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode settings ... ok
test_banks (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R banks ... ok
test_brute_force (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R brute force ... ok
test_clone (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R clone ... ok
test_copy_all (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R copy all ... ok
test_detect (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R detect ... ok
test_edges (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R edges ... ok
test_settings (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R settings ... ok
test_banks (tests.TestCase_IcomID51)
Testing Icom ID-51 banks ... ok
test_brute_force (tests.TestCase_IcomID51)
Testing Icom ID-51 brute force ... ok
test_clone (tests.TestCase_IcomID51)
Testing Icom ID-51 clone ... ok
test_copy_all (tests.TestCase_IcomID51)
Testing Icom ID-51 copy all ... ok
test_detect (tests.TestCase_IcomID51)
Testing Icom ID-51 detect ... ok
test_edges (tests.TestCase_IcomID51)
Testing Icom ID-51 edges ... ok
test_settings (tests.TestCase_IcomID51)
Testing Icom ID-51 settings ... ok
test_banks (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D brute force ... ok
test_clone (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D clone ... ok
test_copy_all (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D copy all ... ok
test_detect (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D detect ... ok
test_edges (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D edges ... ok
test_settings (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D settings ... ok
test_banks (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 brute force ... ok
test_clone (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 copy all ... ok
test_detect (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 detect ... ok
test_edges (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 edges ... ok
test_settings (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF brute force ... ok
test_clone (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF clone ... ok
test_copy_all (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF copy all ... ok
test_detect (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF detect ... ok
test_edges (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF edges ... ok
test_settings (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF settings ... ok
test_banks (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF brute force ... ok
test_clone (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF clone ... ok
test_copy_all (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF copy all ... ok
test_detect (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF detect ... ok
test_edges (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF edges ... ok
test_settings (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF settings ... ok
test_banks (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus banks ... ok
test_brute_force (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus brute force ... ok
test_clone (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus clone ... ok
test_copy_all (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus copy all ... ok
test_detect (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus detect ... ok
test_edges (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus edges ... ok
test_settings (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus settings ... ok
test_banks (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D banks ... ok
test_brute_force (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D brute force ... ok
test_clone (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D clone ... ok
test_copy_all (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D copy all ... ok
test_detect (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D detect ... ok
test_edges (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D edges ... ok
test_settings (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D settings ... ok

----------------------------------------------------------------------
Ran 1246 tests in 496.611s

OK (skipped=188)

struct memory {
  bbcd rx_freq[4];
  bbcd tx_freq[4];
  lbcd rx_tone[2];
  lbcd tx_tone[2];

  u8 unknown10:5,
     highpower:1,
     unknown11:2;
  u8 unknown20:4,
     narrow:1,
     unknown21:3;
  u8 unknown31:1,
     scanadd:1,
     unknown32:6;
  u8 unknown4;
};

struct name {
  char name[7];
};

#seekto 0x0010;
struct memory channels[128];

#seekto 0x08C0;
struct name names[128];

#seekto 0x2020;
struct memory vfo1;
struct memory vfo2;

style create: /chirp/.tox/style
style installdeps: pep8==1.6.2, future
style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
style run-test-pre: PYTHONHASHSEED='1004288923'
style run-test: commands[0] | python ./tools/cpep8.py
___________________________________ summary ____________________________________
  unit: commands succeeded
  driver: commands succeeded
  style: commands succeeded
  congratulations :)
Email was triggered for: Success
Sending email for trigger: Success

More information about the chirp_devel mailing list