[chirp_devel] Build test results: Failure
Build System
Sun Aug 21 08:25:17 PDT 2022
Tested changes:
[Ran Katz <rankatz at gmail.com>] [tg_uv2p] (revised) Dont set a priority channel if empty or Broadcast-FM. Fixes fifth issue in #9939
Per Dan's suggestion changed implementation to a validation function and an exception to notify user of wrong input
[Ran Katz <rankatz at gmail.com>] [TG-UV2+] adding missing log messages in set_settings()
[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281
[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141
[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281
[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292
[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231
[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214
[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117
[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181
[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176
[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172
[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels
[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122
[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166
[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163
[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145
Full log:
[...truncated 1391 lines...]
test_edges (tests.TestCase_BTECHFRSA1)
Testing BTECH FRS-A1 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_BTECHFRSA1)
Testing BTECH FRS-A1 settings ... ok
test_banks (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B brute force ... ok
test_clone (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B clone ... ok
test_copy_all (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B copy all ... ok
test_detect (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B detect ... ok
test_edges (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB627B)
Testing Retevis RB627B settings ... ok
test_banks (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E brute force ... ok
test_clone (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E clone ... ok
test_copy_all (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E copy all ... ok
test_detect (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E detect ... ok
test_edges (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E edges ... ok
test_settings (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode settings ... ok
test_banks (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E banks ... ok
test_brute_force (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E brute force ... ok
test_clone (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E clone ... ok
test_copy_all (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E copy all ... ok
test_detect (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E detect ... ok
test_edges (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E edges ... ok
test_settings (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E settings ... ok
test_banks (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 brute force ... ok
test_clone (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 clone ... ok
test_copy_all (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 copy all ... ok
test_detect (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 detect ... ok
test_edges (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 edges ... ok
test_settings (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 brute force ... ok
test_clone (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 clone ... ok
test_copy_all (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 copy all ... ok
test_detect (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 detect ... ok
test_edges (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_BTECHFRSB1)
Testing BTECH FRS-B1 settings ... ok
test_banks (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R brute force ... ok
test_clone (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R clone ... ok
test_copy_all (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R copy all ... ok
test_detect (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R detect ... ok
test_edges (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R edges ... ok
test_settings (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R settings ... ok
test_banks (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 brute force ... ok
test_clone (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 clone ... ok
test_copy_all (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 copy all ... ok
test_detect (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 detect ... ok
test_edges (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 edges ... ok
test_settings (tests.TestCase_RetevisRT9000D220260)
Testing Retevis RT9000D_220-260 settings ... ok
test_banks (tests.TestCase_RetevisRB75)
Testing Retevis RB75 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB75)
Testing Retevis RB75 brute force ... ok
test_clone (tests.TestCase_RetevisRB75)
Testing Retevis RB75 clone ... ok
test_copy_all (tests.TestCase_RetevisRB75)
Testing Retevis RB75 copy all ... ok
test_detect (tests.TestCase_RetevisRB75)
Testing Retevis RB75 detect ... ok
test_edges (tests.TestCase_RetevisRB75)
Testing Retevis RB75 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB75)
Testing Retevis RB75 settings ... ok
test_banks (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R banks ... ok
test_brute_force (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R brute force ... ok
test_clone (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R clone ... ok
test_copy_all (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R copy all ... ok
test_detect (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R detect ... ok
test_edges (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R edges ... ok
test_settings (tests.TestCase_YaesuFT65R)
Testing Yaesu FT-65R settings ... ok
test_banks (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D banks ... ok
test_brute_force (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D brute force ... ok
test_clone (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D clone ... ok
test_copy_all (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D copy all ... ok
test_detect (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D detect ... ok
test_edges (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D edges ... ok
test_settings (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D settings ... ok
test_banks (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 brute force ... ok
test_clone (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 clone ... ok
test_copy_all (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 copy all ... ok
test_detect (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 detect ... ok
test_edges (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 edges ... ok
test_settings (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 settings ... ok
test_banks (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode settings ... ok
test_banks (tests.TestCase_IcomID31A)
Testing Icom ID-31A banks ... ok
test_brute_force (tests.TestCase_IcomID31A)
Testing Icom ID-31A brute force ... ok
test_clone (tests.TestCase_IcomID31A)
Testing Icom ID-31A clone ... ok
test_copy_all (tests.TestCase_IcomID31A)
Testing Icom ID-31A copy all ... ok
test_detect (tests.TestCase_IcomID31A)
Testing Icom ID-31A detect ... ok
test_edges (tests.TestCase_IcomID31A)
Testing Icom ID-31A edges ... ok
test_settings (tests.TestCase_IcomID31A)
Testing Icom ID-31A settings ... ok
test_banks (tests.TestCase_BTECHGMRS20V2)
Testing BTECH GMRS-20V2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRS20V2)
Testing BTECH GMRS-20V2 brute force ... ok
test_clone (tests.TestCase_BTECHGMRS20V2)
Testing BTECH GMRS-20V2 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRS20V2)
Testing BTECH GMRS-20V2 copy all ... ok
test_detect (tests.TestCase_BTECHGMRS20V2)
Testing BTECH GMRS-20V2 detect ... ok
test_edges (tests.TestCase_BTECHGMRS20V2)
Testing BTECH GMRS-20V2 edges ... ok
test_settings (tests.TestCase_BTECHGMRS20V2)
Testing BTECH GMRS-20V2 settings ... ok
test_banks (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R brute force ... ok
test_clone (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R clone ... ok
test_copy_all (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R copy all ... ok
test_detect (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R detect ... ok
test_edges (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R edges ... ok
test_settings (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R settings ... ok
test_banks (tests.TestCase_RetevisRB85)
Testing Retevis RB85 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB85)
Testing Retevis RB85 brute force ... ok
test_clone (tests.TestCase_RetevisRB85)
Testing Retevis RB85 clone ... ok
test_copy_all (tests.TestCase_RetevisRB85)
Testing Retevis RB85 copy all ... ok
test_detect (tests.TestCase_RetevisRB85)
Testing Retevis RB85 detect ... ok
test_edges (tests.TestCase_RetevisRB85)
Testing Retevis RB85 edges ... ok
test_settings (tests.TestCase_RetevisRB85)
Testing Retevis RB85 settings ... ok
test_banks (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 brute force ... ok
test_clone (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 clone ... ok
test_copy_all (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 copy all ... ok
test_detect (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 detect ... ok
test_edges (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 edges ... ok
test_settings (tests.TestCase_RetevisRT9000D400490)
Testing Retevis RT9000D_400-490 settings ... ok
test_banks (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode settings ... ok
test_banks (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 brute force ... ok
test_clone (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 clone ... ok
test_copy_all (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 copy all ... ok
test_detect (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 detect ... ok
test_edges (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 edges ... ok
test_settings (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 settings ... ok
test_banks (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 brute force ... ok
test_clone (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 clone ... ok
test_copy_all (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 copy all ... ok
test_detect (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 detect ... ok
test_edges (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 edges ... ok
test_settings (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 settings ... ok
test_banks (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D banks ... ok
test_brute_force (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D brute force ... ok
test_clone (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D clone ... ok
test_copy_all (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D copy all ... ok
test_detect (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D detect ... ok
test_edges (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D edges ... ok
test_settings (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D settings ... ok
test_banks (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 detect ... ok
test_edges (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 edges ... ok
test_settings (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 settings ... ok
test_banks (tests.TestCase_RetevisRT1)
Testing Retevis RT1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT1)
Testing Retevis RT1 brute force ... ok
test_clone (tests.TestCase_RetevisRT1)
Testing Retevis RT1 clone ... ok
test_copy_all (tests.TestCase_RetevisRT1)
Testing Retevis RT1 copy all ... ok
test_detect (tests.TestCase_RetevisRT1)
Testing Retevis RT1 detect ... ok
test_edges (tests.TestCase_RetevisRT1)
Testing Retevis RT1 edges ... ok
test_settings (tests.TestCase_RetevisRT1)
Testing Retevis RT1 settings ... ok
test_banks (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D brute force ... ok
test_clone (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D copy all ... ok
test_detect (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D detect ... ok
test_edges (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D edges ... ok
test_settings (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 brute force ... ok
test_clone (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 clone ... ok
test_copy_all (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 copy all ... ok
test_detect (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 detect ... ok
test_edges (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 edges ... ok
test_settings (tests.TestCase_RetevisRT9000D6688)
Testing Retevis RT9000D_66-88 settings ... ok
test_banks (tests.TestCase_IcomID51)
Testing Icom ID-51 banks ... ok
test_brute_force (tests.TestCase_IcomID51)
Testing Icom ID-51 brute force ... ok
test_clone (tests.TestCase_IcomID51)
Testing Icom ID-51 clone ... ok
test_copy_all (tests.TestCase_IcomID51)
Testing Icom ID-51 copy all ... ok
test_detect (tests.TestCase_IcomID51)
Testing Icom ID-51 detect ... ok
test_edges (tests.TestCase_IcomID51)
Testing Icom ID-51 edges ... ok
test_settings (tests.TestCase_IcomID51)
Testing Icom ID-51 settings ... ok
test_banks (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode settings ... ok
test_banks (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 brute force ... ok
test_clone (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 clone ... ok
test_copy_all (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 copy all ... ok
test_detect (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 detect ... ok
test_edges (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 edges ... ok
test_settings (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M brute force ... ok
test_clone (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M clone ... ok
test_copy_all (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M copy all ... ok
test_detect (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M detect ... ok
test_edges (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M edges ... ok
test_settings (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M settings ... ok
test_banks (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 brute force ... ok
test_clone (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 clone ... ok
test_copy_all (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 copy all ... ok
test_detect (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 detect ... ok
test_edges (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 edges ... ok
test_settings (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 settings ... ok
test_banks (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 detect ... ok
test_edges (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 edges ... ok
test_settings (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 settings ... ok
test_banks (tests.TestCase_RetevisRT16)
Testing Retevis RT16 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT16)
Testing Retevis RT16 brute force ... ok
test_clone (tests.TestCase_RetevisRT16)
Testing Retevis RT16 clone ... ok
test_copy_all (tests.TestCase_RetevisRT16)
Testing Retevis RT16 copy all ... ok
test_detect (tests.TestCase_RetevisRT16)
Testing Retevis RT16 detect ... ok
test_edges (tests.TestCase_RetevisRT16)
Testing Retevis RT16 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT16)
Testing Retevis RT16 settings ... ok
test_banks (tests.TestCase_RetevisRT95)
Testing Retevis RT95 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT95)
Testing Retevis RT95 brute force ... ok
test_clone (tests.TestCase_RetevisRT95)
Testing Retevis RT95 clone ... ok
test_copy_all (tests.TestCase_RetevisRT95)
Testing Retevis RT95 copy all ... ok
test_detect (tests.TestCase_RetevisRT95)
Testing Retevis RT95 detect ... ok
test_edges (tests.TestCase_RetevisRT95)
Testing Retevis RT95 edges ... ok
test_settings (tests.TestCase_RetevisRT95)
Testing Retevis RT95 settings ... ok
test_banks (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus brute force ... ok
test_clone (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus clone ... ok
test_copy_all (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus copy all ... ok
test_detect (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus detect ... ok
test_edges (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus edges ... ok
test_settings (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus settings ... ok
test_banks (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF brute force ... ok
test_clone (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF clone ... ok
test_copy_all (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF copy all ... ok
test_detect (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF detect ... ok
test_edges (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF edges ... ok
test_settings (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF settings ... ok
test_banks (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 brute force ... ok
test_clone (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 clone ... ok
test_copy_all (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 copy all ... ok
test_detect (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 detect ... ok
test_edges (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 edges ... ok
test_settings (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 brute force ... ok
test_clone (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 copy all ... ok
test_detect (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 detect ... ok
test_edges (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 edges ... ok
test_settings (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 settings ... ok
test_banks (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus banks ... ok
test_brute_force (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus brute force ... ok
test_clone (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus clone ... ok
test_copy_all (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus copy all ... ok
test_detect (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus detect ... ok
test_edges (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus edges ... ok
test_settings (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus settings ... ok
test_banks (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 banks ... ok
test_brute_force (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 brute force ... ok
test_clone (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 copy all ... ok
test_detect (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 detect ... ok
test_edges (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 edges ... ok
test_settings (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 settings ... ok
test_banks (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 brute force ... ok
test_clone (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 copy all ... ok
test_detect (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 detect ... ok
test_edges (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 edges ... ok
test_settings (tests.TestCase_BTECHGMRSV2)
Testing BTECH GMRS-V2 settings ... ok
test_banks (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 brute force ... ok
test_clone (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 clone ... ok
test_copy_all (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 copy all ... ok
test_detect (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 detect ... ok
test_edges (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 edges ... ok
test_settings (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT21)
Testing Retevis RT21 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT21)
Testing Retevis RT21 brute force ... ok
test_clone (tests.TestCase_RetevisRT21)
Testing Retevis RT21 clone ... ok
test_copy_all (tests.TestCase_RetevisRT21)
Testing Retevis RT21 copy all ... ok
test_detect (tests.TestCase_RetevisRT21)
Testing Retevis RT21 detect ... ok
test_edges (tests.TestCase_RetevisRT21)
Testing Retevis RT21 edges ... ok
test_settings (tests.TestCase_RetevisRT21)
Testing Retevis RT21 settings ... ok
test_banks (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV brute force ... ok
test_clone (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV clone ... ok
test_copy_all (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV copy all ... ok
test_detect (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV detect ... ok
test_edges (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV edges ... ok
test_settings (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV settings ... ok
test_banks (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 brute force ... ok
test_clone (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 clone ... ok
test_copy_all (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 copy all ... ok
test_detect (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 detect ... ok
test_edges (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 edges ... ok
test_settings (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 settings ... ok
test_banks (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF brute force ... ok
test_clone (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF clone ... ok
test_copy_all (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF copy all ... ok
test_detect (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF detect ... ok
test_edges (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF edges ... ok
test_settings (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF settings ... ok
test_banks (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A brute force ... ok
test_clone (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A clone ... ok
test_copy_all (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A copy all ... ok
test_detect (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A detect ... ok
test_edges (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A edges ... ok
test_settings (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A settings ... ok
test_banks (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 detect ... ok
test_edges (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 settings ... ok
test_banks (tests.TestCase_IcomID800H)
Testing Icom ID-800H banks ... ok
test_brute_force (tests.TestCase_IcomID800H)
Testing Icom ID-800H brute force ... ok
test_clone (tests.TestCase_IcomID800H)
Testing Icom ID-800H clone ... ok
test_copy_all (tests.TestCase_IcomID800H)
Testing Icom ID-800H copy all ... ok
test_detect (tests.TestCase_IcomID800H)
Testing Icom ID-800H detect ... ok
test_edges (tests.TestCase_IcomID800H)
Testing Icom ID-800H edges ... ok
test_settings (tests.TestCase_IcomID800H)
Testing Icom ID-800H settings ... ok
test_banks (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D detect ... ok
test_edges (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D edges ... ok
test_settings (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D settings ... ok
test_banks (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 brute force ... ok
test_clone (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 clone ... ok
test_copy_all (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 copy all ... ok
test_detect (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 detect ... ok
test_edges (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 edges ... ok
test_settings (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 settings ... ok
test_banks (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D brute force ... ok
test_clone (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D copy all ... ok
test_detect (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D detect ... ok
test_edges (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D edges ... ok
test_settings (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT22)
Testing Retevis RT22 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22)
Testing Retevis RT22 brute force ... ok
test_clone (tests.TestCase_RetevisRT22)
Testing Retevis RT22 clone ... ok
test_copy_all (tests.TestCase_RetevisRT22)
Testing Retevis RT22 copy all ... ok
test_detect (tests.TestCase_RetevisRT22)
Testing Retevis RT22 detect ... ok
test_edges (tests.TestCase_RetevisRT22)
Testing Retevis RT22 edges ... ok
test_settings (tests.TestCase_RetevisRT22)
Testing Retevis RT22 settings ... ok
test_banks (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A detect ... ok
test_edges (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A edges ... ok
test_settings (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A settings ... ok
test_banks (tests.TestCase_RadioddityR2)
Testing Radioddity R2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityR2)
Testing Radioddity R2 brute force ... ok
test_clone (tests.TestCase_RadioddityR2)
Testing Radioddity R2 clone ... ok
test_copy_all (tests.TestCase_RadioddityR2)
Testing Radioddity R2 copy all ... ok
test_detect (tests.TestCase_RadioddityR2)
Testing Radioddity R2 detect ... ok
test_edges (tests.TestCase_RadioddityR2)
Testing Radioddity R2 edges ... ok
test_settings (tests.TestCase_RadioddityR2)
Testing Radioddity R2 settings ... ok
test_banks (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV brute force ... ok
test_clone (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV clone ... ok
test_copy_all (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV copy all ... ok
test_detect (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV detect ... ok
test_edges (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV edges ... ok
test_settings (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV settings ... ok
test_banks (tests.TestCase_TYTTH350)
Testing TYT TH-350 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH350)
Testing TYT TH-350 brute force ... ok
test_clone (tests.TestCase_TYTTH350)
Testing TYT TH-350 clone ... ok
test_copy_all (tests.TestCase_TYTTH350)
Testing TYT TH-350 copy all ... ok
test_detect (tests.TestCase_TYTTH350)
Testing TYT TH-350 detect ... ok
test_edges (tests.TestCase_TYTTH350)
Testing TYT TH-350 edges ... ok
test_settings (tests.TestCase_TYTTH350)
Testing TYT TH-350 settings ... ok
test_banks (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 brute force ... ok
test_clone (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 clone ... ok
test_copy_all (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 copy all ... ok
test_detect (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 detect ... ok
test_edges (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 edges ... ok
test_settings (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 settings ... ok
test_banks (tests.TestCase_IcomID880H)
Testing Icom ID-880H banks ... ok
test_brute_force (tests.TestCase_IcomID880H)
Testing Icom ID-880H brute force ... ok
test_clone (tests.TestCase_IcomID880H)
Testing Icom ID-880H clone ... ok
test_copy_all (tests.TestCase_IcomID880H)
Testing Icom ID-880H copy all ... ok
test_detect (tests.TestCase_IcomID880H)
Testing Icom ID-880H detect ... ok
test_edges (tests.TestCase_IcomID880H)
Testing Icom ID-880H edges ... ok
test_settings (tests.TestCase_IcomID880H)
Testing Icom ID-880H settings ... ok
test_banks (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND brute force ... ok
test_clone (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND clone ... ok
test_copy_all (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND copy all ... ok
test_detect (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND detect ... ok
test_edges (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND edges ... ok
test_settings (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND settings ... ok
test_banks (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS brute force ... ok
test_clone (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS clone ... ok
test_copy_all (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS copy all ... ok
test_detect (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS detect ... ok
test_edges (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS edges ... ok
test_settings (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS settings ... ok
test_banks (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus detect ... ok
test_edges (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus edges ... ok
test_settings (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus settings ... ok
test_banks (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G brute force ... ok
test_clone (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G clone ... ok
test_copy_all (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G copy all ... ok
test_detect (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G detect ... ok
test_edges (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G edges ... ok
test_settings (tests.TestCase_RadioddityUV5G)
Testing Radioddity UV-5G settings ... ok
test_banks (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B detect ... ok
test_edges (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B edges ... ok
test_settings (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B settings ... ok
test_banks (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 brute force ... ok
test_clone (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 clone ... ok
test_copy_all (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 copy all ... ok
test_detect (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 detect ... ok
test_edges (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 edges ... ok
test_settings (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 settings ... ok
test_banks (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 banks ... ok
test_brute_force (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 brute force ... ok
test_clone (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 clone ... ok
test_copy_all (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 copy all ... ok
test_detect (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 detect ... ok
test_edges (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 edges ... ok
test_settings (tests.TestCase_YaesuVX2)
Testing Yaesu VX-2 settings ... ok
test_banks (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M brute force ... ok
test_clone (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M clone ... ok
test_copy_all (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M copy all ... ok
test_detect (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M detect ... ok
test_edges (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M edges ... ok
test_settings (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 brute force ... ok
test_clone (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 clone ... ok
test_copy_all (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 copy all ... ok
test_detect (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 detect ... ok
test_edges (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 edges ... ok
test_settings (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 settings ... ok
test_banks (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 detect ... ok
test_edges (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 edges ... ok
test_settings (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 settings ... ok
test_banks (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S brute force ... ok
test_clone (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S clone ... ok
test_copy_all (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S copy all ... ok
test_detect (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S detect ... ok
test_edges (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S settings ... ok
test_banks (tests.TestCase_RadtelT18)
Testing Radtel T18 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadtelT18)
Testing Radtel T18 brute force ... ok
test_clone (tests.TestCase_RadtelT18)
Testing Radtel T18 clone ... ok
test_copy_all (tests.TestCase_RadtelT18)
Testing Radtel T18 copy all ... ok
test_detect (tests.TestCase_RadtelT18)
Testing Radtel T18 detect ... ok
test_edges (tests.TestCase_RadtelT18)
Testing Radtel T18 edges ... ok
test_settings (tests.TestCase_RadtelT18)
Testing Radtel T18 settings ... ok
test_banks (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B detect ... ok
test_edges (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B edges ... ok
test_settings (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B settings ... ok
test_banks (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S brute force ... ok
test_clone (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S clone ... ok
test_copy_all (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S copy all ... ok
test_detect (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S detect ... ok
test_edges (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S edges ... ok
test_settings (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S settings ... ok
test_banks (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M brute force ... ok
test_clone (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M clone ... ok
test_copy_all (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M copy all ... ok
test_detect (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M detect ... ok
test_edges (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M edges ... ok
test_settings (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M settings ... ok
test_banks (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E detect ... ok
test_edges (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E edges ... ok
test_settings (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E settings ... ok
test_banks (tests.TestCase_RetevisRT23)
Testing Retevis RT23 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT23)
Testing Retevis RT23 brute force ... ok
test_clone (tests.TestCase_RetevisRT23)
Testing Retevis RT23 clone ... ok
test_copy_all (tests.TestCase_RetevisRT23)
Testing Retevis RT23 copy all ... ok
test_detect (tests.TestCase_RetevisRT23)
Testing Retevis RT23 detect ... ok
test_edges (tests.TestCase_RetevisRT23)
Testing Retevis RT23 edges ... ok
test_settings (tests.TestCase_RetevisRT23)
Testing Retevis RT23 settings ... ok
test_banks (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 brute force ... ok
test_clone (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 clone ... ok
test_copy_all (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 copy all ... ok
test_detect (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 detect ... ok
test_edges (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 edges ... ok
test_settings (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 settings ... ok
test_banks (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 banks ... ok
test_brute_force (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 brute force ... ok
test_clone (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 clone ... ok
test_copy_all (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 copy all ... ok
test_detect (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 detect ... ok
test_edges (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 edges ... ok
test_settings (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 settings ... ok
test_banks (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 detect ... ok
test_edges (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 edges ... ok
test_settings (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 settings ... ok
test_banks (tests.TestCase_RetevisRA85)
Testing Retevis RA85 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRA85)
Testing Retevis RA85 brute force ... ok
test_clone (tests.TestCase_RetevisRA85)
Testing Retevis RA85 clone ... ok
test_copy_all (tests.TestCase_RetevisRA85)
Testing Retevis RA85 copy all ... ok
test_detect (tests.TestCase_RetevisRA85)
Testing Retevis RA85 detect ... ok
test_edges (tests.TestCase_RetevisRA85)
Testing Retevis RA85 edges ... ok
test_settings (tests.TestCase_RetevisRA85)
Testing Retevis RA85 settings ... ok
test_banks (tests.TestCase_IcomIC208H)
Testing Icom IC-208H banks ... ok
test_brute_force (tests.TestCase_IcomIC208H)
Testing Icom IC-208H brute force ... ok
test_clone (tests.TestCase_IcomIC208H)
Testing Icom IC-208H clone ... ok
test_copy_all (tests.TestCase_IcomIC208H)
Testing Icom IC-208H copy all ... ok
test_detect (tests.TestCase_IcomIC208H)
Testing Icom IC-208H detect ... ok
test_edges (tests.TestCase_IcomIC208H)
Testing Icom IC-208H edges ... ok
test_settings (tests.TestCase_IcomIC208H)
Testing Icom IC-208H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A brute force ... ok
test_clone (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A copy all ... ok
test_detect (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A detect ... ok
test_edges (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A edges ... ok
test_settings (tests.TestCase_WouxunKGUV920PA)
Testing Wouxun KG-UV920P-A settings ... ok
test_banks (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 detect ... ok
test_edges (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 edges ... ok
test_settings (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 brute force ... ok
test_clone (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 clone ... ok
test_copy_all (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 copy all ... ok
test_detect (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 detect ... ok
test_edges (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 edges ... ok
test_settings (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 settings ... ok
test_banks (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 banks ... ok
test_brute_force (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 brute force ... ok
test_clone (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 clone ... ok
test_copy_all (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 copy all ... ok
test_detect (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 detect ... ok
test_edges (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 edges ... ok
test_settings (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRB15)
Testing Retevis RB15 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB15)
Testing Retevis RB15 brute force ... ok
test_clone (tests.TestCase_RetevisRB15)
Testing Retevis RB15 clone ... ok
test_copy_all (tests.TestCase_RetevisRB15)
Testing Retevis RB15 copy all ... ok
test_detect (tests.TestCase_RetevisRB15)
Testing Retevis RB15 detect ... ok
test_edges (tests.TestCase_RetevisRB15)
Testing Retevis RB15 edges ... ok
test_settings (tests.TestCase_RetevisRB15)
Testing Retevis RB15 settings ... ok
test_banks (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 brute force ... ok
test_clone (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 clone ... ok
test_copy_all (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 copy all ... ok
test_detect (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 detect ... ok
test_edges (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 edges ... ok
test_settings (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 settings ... ok
test_banks (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R detect ... ok
test_edges (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R edges ... ok
test_settings (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H brute force ... ok
test_clone (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H clone ... ok
test_copy_all (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H copy all ... ok
test_detect (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H detect ... ok
test_edges (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H edges ... ok
test_settings (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus brute force ... ok
test_clone (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus copy all ... ok
test_detect (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus detect ... ok
test_edges (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus edges ... ok
test_settings (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus settings ... ok
test_banks (tests.TestCase_RetevisRB17)
Testing Retevis RB17 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17)
Testing Retevis RB17 brute force ... ok
test_clone (tests.TestCase_RetevisRB17)
Testing Retevis RB17 clone ... ok
test_copy_all (tests.TestCase_RetevisRB17)
Testing Retevis RB17 copy all ... ok
test_detect (tests.TestCase_RetevisRB17)
Testing Retevis RB17 detect ... ok
test_edges (tests.TestCase_RetevisRB17)
Testing Retevis RB17 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17)
Testing Retevis RB17 settings ... ok
test_banks (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 banks ... ok
test_brute_force (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 brute force ... ok
test_clone (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 clone ... ok
test_copy_all (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 copy all ... ok
test_detect (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 detect ... ok
test_edges (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 edges ... ok
test_settings (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 settings ... ok
test_banks (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) detect ... ok
test_edges (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) edges ... ok
test_settings (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) settings ... ok
test_banks (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P brute force ... ok
test_clone (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P clone ... ok
test_copy_all (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P copy all ... ok
test_detect (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P detect ... ok
test_edges (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P edges ... ok
test_settings (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P settings ... ok
test_banks (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A brute force ... ok
test_clone (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A clone ... ok
test_copy_all (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A copy all ... ok
test_detect (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A detect ... ok
test_edges (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A settings ... ok
test_banks (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 banks ... ok
test_brute_force (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 brute force ... ok
test_clone (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 clone ... ok
test_copy_all (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 copy all ... ok
test_detect (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 detect ... ok
test_edges (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 edges ... ok
test_settings (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P brute force ... ok
test_clone (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P clone ... ok
test_copy_all (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P copy all ... ok
test_detect (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P detect ... ok
test_edges (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17P)
Testing Retevis RB17P settings ... ok
test_banks (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M brute force ... ok
test_clone (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M copy all ... ok
test_detect (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M detect ... ok
test_edges (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M edges ... ok
test_settings (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 brute force ... ok
test_clone (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 clone ... ok
test_copy_all (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 copy all ... ok
test_detect (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 detect ... ok
test_edges (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 edges ... ok
test_settings (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 settings ... ok
test_banks (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V brute force ... ok
test_clone (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V clone ... ok
test_copy_all (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V copy all ... ok
test_detect (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V detect ... ok
test_edges (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17V)
Testing Retevis RB17V settings ... ok
test_banks (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR banks ... ok
test_brute_force (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR brute force ... ok
test_clone (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR clone ... ok
test_copy_all (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR copy all ... ok
test_detect (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR detect ... ok
test_edges (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR edges ... ok
test_settings (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR settings ... ok
test_banks (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M brute force ... ok
test_clone (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M copy all ... ok
test_detect (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M detect ... ok
test_edges (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M edges ... ok
test_settings (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 brute force ... ok
test_clone (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 copy all ... ok
test_detect (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 detect ... ok
test_edges (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 edges ... ok
test_settings (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 settings ... ok
test_banks (tests.TestCase_RetevisRB18)
Testing Retevis RB18 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB18)
Testing Retevis RB18 brute force ... ok
test_clone (tests.TestCase_RetevisRB18)
Testing Retevis RB18 clone ... ok
test_copy_all (tests.TestCase_RetevisRB18)
Testing Retevis RB18 copy all ... ok
test_detect (tests.TestCase_RetevisRB18)
Testing Retevis RB18 detect ... ok
test_edges (tests.TestCase_RetevisRB18)
Testing Retevis RB18 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB18)
Testing Retevis RB18 settings ... ok
test_banks (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE banks ... ok
test_brute_force (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE brute force ... ok
test_clone (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE clone ... ok
test_copy_all (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE copy all ... ok
test_detect (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE detect ... ok
test_edges (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE edges ... ok
test_settings (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE settings ... ok
test_banks (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) detect ... ok
test_edges (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) edges ... ok
test_settings (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) settings ... ok
test_banks (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R banks ... ok
test_brute_force (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R brute force ... ok
test_clone (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R clone ... ok
test_copy_all (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R copy all ... ok
test_detect (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R detect ... ok
test_edges (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R edges ... ok
test_settings (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R settings ... ok
test_banks (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 banks ... ok
test_brute_force (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 brute force ... ok
test_clone (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 copy all ... ok
test_detect (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 detect ... ok
test_edges (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 edges ... ok
test_settings (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D banks ... ok
test_brute_force (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D brute force ... ok
test_clone (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D clone ... ok
test_copy_all (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D copy all ... ok
test_detect (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D detect ... ok
test_edges (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D edges ... ok
test_settings (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D settings ... ok
test_banks (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R banks ... ok
test_brute_force (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R brute force ... ok
test_clone (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R clone ... ok
test_copy_all (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R copy all ... ok
test_detect (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R detect ... ok
test_edges (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R edges ... ok
test_settings (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R settings ... ok
----------------------------------------------------------------------
Ran 1358 tests in 511.143s
OK (skipped=209)
struct memory {
bbcd rx_freq[4];
bbcd tx_freq[4];
lbcd rx_tone[2];
lbcd tx_tone[2];
u8 unknown10:5,
highpower:1,
unknown11:2;
u8 unknown20:4,
narrow:1,
unknown21:3;
u8 unknown31:1,
scanadd:1,
unknown32:6;
u8 unknown4;
};
struct name {
char name[7];
};
#seekto 0x0010;
struct memory channels[128];
#seekto 0x08C0;
struct name names[128];
#seekto 0x2020;
struct memory vfo1;
struct memory vfo2;
style create: /chirp/.tox/style
style installdeps: pep8==1.6.2, future
style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
style run-test-pre: PYTHONHASHSEED='1017356211'
style run-test: commands[0] | python ./tools/cpep8.py
./chirp/drivers/tg_uv2p.py:723:80: E501 line too long (88 > 79 characters)
./chirp/drivers/tg_uv2p.py:726:80: E501 line too long (88 > 79 characters)
./chirp/drivers/tg_uv2p.py:729:80: E501 line too long (88 > 79 characters)
ERROR: InvocationError for command /chirp/.tox/style/bin/python ./tools/cpep8.py (exited with code 1)
___________________________________ summary ____________________________________
unit: commands succeeded
driver: commands succeeded
ERROR: style: commands failed
Build step 'Execute shell' marked build as failure
Email was triggered for: Failure
Sending email for trigger: Failure
More information about the chirp_devel
mailing list