[chirp_devel] Build test results: Failure
Build System
Wed Sep 29 18:50:07 PDT 2021
Tested changes:
[Kosta A <ve7kcy at gmail.com>] # Parent 5aa2294d78ea241c6573dcf1929475b072e73685
Minor UI tweak, do not show empty header in tree view column. Fixes #9397.
[Kosta A <ve7kcy at gmail.com>] # Parent d156d3a46b7e6cbce985dc14186f0e07b5d3016b
Prevent memory editor from always loading last memory in memory range twice. Fixes #9401
[Kosta A <ve7kcy at gmail.com>] # Parent 5aa2294d78ea241c6573dcf1929475b072e73685
Prevent re-entrant calls to 'update_recent_files' when opening a file from the 'Recent Files' menu action. Fixes #9399.
Gtk was failing on this and was sending an error message to the console.
[Kosta A <ve7kcy at gmail.com>] Supress console spew from python-future warning in non-debug builds.
[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281
[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141
[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281
[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292
[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231
[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214
[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117
[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181
[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176
[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172
[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels
[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122
[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166
[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163
[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145
Full log:
[...truncated 970 lines...]
Testing Radtel T18 detect ... ok
test_edges (tests.TestCase_RadtelT18)
Testing Radtel T18 edges ... ok
test_settings (tests.TestCase_RadtelT18)
Testing Radtel T18 settings ... ok
test_banks (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 brute force ... ok
test_clone (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 clone ... ok
test_copy_all (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 copy all ... ok
test_detect (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 detect ... ok
test_edges (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 edges ... ok
test_settings (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 settings ... ok
test_banks (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 brute force ... ok
test_clone (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 clone ... ok
test_copy_all (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 copy all ... ok
test_detect (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 detect ... ok
test_edges (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 edges ... ok
test_settings (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 settings ... ok
test_banks (tests.TestCase_IcomID800H)
Testing Icom ID-800H banks ... ok
test_brute_force (tests.TestCase_IcomID800H)
Testing Icom ID-800H brute force ... ok
test_clone (tests.TestCase_IcomID800H)
Testing Icom ID-800H clone ... ok
test_copy_all (tests.TestCase_IcomID800H)
Testing Icom ID-800H copy all ... ok
test_detect (tests.TestCase_IcomID800H)
Testing Icom ID-800H detect ... ok
test_edges (tests.TestCase_IcomID800H)
Testing Icom ID-800H edges ... ok
test_settings (tests.TestCase_IcomID800H)
Testing Icom ID-800H settings ... ok
test_banks (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF brute force ... ok
test_clone (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF clone ... ok
test_copy_all (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF copy all ... ok
test_detect (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF detect ... ok
test_edges (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF edges ... ok
test_settings (tests.TestCase_LUITONLT580UHF)
Testing LUITON LT-580_UHF settings ... ok
test_banks (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 banks ... ok
test_brute_force (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 brute force ... ok
test_clone (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 clone ... ok
test_copy_all (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 copy all ... ok
test_detect (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 detect ... ok
test_edges (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 edges ... ok
test_settings (tests.TestCase_YaesuVX3)
Testing Yaesu VX-3 settings ... ok
test_banks (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV brute force ... ok
test_clone (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV clone ... ok
test_copy_all (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV copy all ... ok
test_detect (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV detect ... ok
test_edges (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV edges ... ok
test_settings (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV settings ... ok
test_banks (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H banks ... ok
test_brute_force (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H brute force ... ok
test_clone (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H clone ... ok
test_copy_all (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H copy all ... ok
test_detect (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H detect ... ok
test_edges (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H edges ... ok
test_settings (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 brute force ... ok
test_clone (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 clone ... ok
test_copy_all (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 copy all ... ok
test_detect (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 detect ... ok
test_edges (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 edges ... ok
test_settings (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 settings ... ok
test_banks (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus detect ... ok
test_edges (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus edges ... ok
test_settings (tests.TestCase_WouxunKGUV8DPlus)
Testing Wouxun KG-UV8D Plus settings ... ok
test_banks (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A brute force ... ok
test_clone (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A clone ... ok
test_copy_all (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A copy all ... ok
test_detect (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A detect ... ok
test_edges (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A settings ... ok
test_banks (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 brute force ... ok
test_clone (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 clone ... ok
test_copy_all (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 copy all ... ok
test_detect (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 detect ... ok
test_edges (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 edges ... ok
test_settings (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 settings ... ok
test_banks (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND brute force ... ok
test_clone (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND clone ... ok
test_copy_all (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND copy all ... ok
test_detect (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND detect ... ok
test_edges (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND edges ... ok
test_settings (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND settings ... ok
test_banks (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF brute force ... ok
test_clone (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF clone ... ok
test_copy_all (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF copy all ... ok
test_detect (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF detect ... ok
test_edges (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF edges ... ok
test_settings (tests.TestCase_LUITONLT580VHF)
Testing LUITON LT-580_VHF settings ... ok
test_banks (tests.TestCase_IcomID880H)
Testing Icom ID-880H banks ... ok
test_brute_force (tests.TestCase_IcomID880H)
Testing Icom ID-880H brute force ... ok
test_clone (tests.TestCase_IcomID880H)
Testing Icom ID-880H clone ... ok
test_copy_all (tests.TestCase_IcomID880H)
Testing Icom ID-880H copy all ... ok
test_detect (tests.TestCase_IcomID880H)
Testing Icom ID-880H detect ... ok
test_edges (tests.TestCase_IcomID880H)
Testing Icom ID-880H edges ... ok
test_settings (tests.TestCase_IcomID880H)
Testing Icom ID-880H settings ... ok
test_banks (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 banks ... ok
test_brute_force (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 brute force ... ok
test_clone (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 clone ... ok
test_copy_all (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 copy all ... ok
test_detect (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 detect ... ok
test_edges (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 edges ... ok
test_settings (tests.TestCase_YaesuVX5)
Testing Yaesu VX-5 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII banks ... ok
test_brute_force (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII brute force ... ok
test_clone (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII clone ... ok
test_copy_all (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII copy all ... ok
test_detect (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII detect ... ok
test_edges (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII edges ... ok
test_settings (tests.TestCase_AnyTone5888UVIII)
Testing AnyTone 5888UVIII settings ... ok
test_banks (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A banks ... ok
test_brute_force (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A brute force ... ok
test_clone (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A clone ... ok
test_copy_all (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A copy all ... ok
test_detect (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A detect ... ok
test_edges (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A edges ... ok
test_settings (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A settings ... ok
test_banks (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S brute force ... ok
test_clone (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S clone ... ok
test_copy_all (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S copy all ... ok
test_detect (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S detect ... ok
test_edges (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S edges ... ok
test_settings (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S settings ... ok
test_banks (tests.TestCase_RetevisRB26)
Testing Retevis RB26 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB26)
Testing Retevis RB26 brute force ... ok
test_clone (tests.TestCase_RetevisRB26)
Testing Retevis RB26 clone ... ok
test_copy_all (tests.TestCase_RetevisRB26)
Testing Retevis RB26 copy all ... ok
test_detect (tests.TestCase_RetevisRB26)
Testing Retevis RB26 detect ... ok
test_edges (tests.TestCase_RetevisRB26)
Testing Retevis RB26 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB26)
Testing Retevis RB26 settings ... ok
test_banks (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E detect ... ok
test_edges (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E edges ... ok
test_settings (tests.TestCase_WouxunKGUV8E)
Testing Wouxun KG-UV8E settings ... ok
test_banks (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) detect ... ok
test_edges (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) edges ... ok
test_settings (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) settings ... ok
test_banks (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 brute force ... ok
test_clone (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 clone ... ok
test_copy_all (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 copy all ... ok
test_detect (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 detect ... ok
test_edges (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 edges ... ok
test_settings (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 settings ... ok
test_banks (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M brute force ... ok
test_clone (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M clone ... ok
test_copy_all (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M copy all ... ok
test_detect (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M detect ... ok
test_edges (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M edges ... ok
test_settings (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV brute force ... ok
test_clone (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV clone ... ok
test_copy_all (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV copy all ... ok
test_detect (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV detect ... ok
test_edges (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV edges ... ok
test_settings (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV settings ... ok
test_banks (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 brute force ... ok
test_clone (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 clone ... ok
test_copy_all (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 copy all ... ok
test_detect (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 detect ... ok
test_edges (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 edges ... ok
test_settings (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 settings ... ok
test_banks (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 banks ... ok
test_brute_force (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 brute force ... ok
test_clone (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 clone ... ok
test_copy_all (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 copy all ... ok
test_detect (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 detect ... ok
test_edges (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 edges ... ok
test_settings (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 settings ... ok
test_banks (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV brute force ... ok
test_clone (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV clone ... ok
test_copy_all (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV copy all ... ok
test_detect (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV detect ... ok
test_edges (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV edges ... ok
test_settings (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV settings ... ok
test_banks (tests.TestCase_RetevisRT1)
Testing Retevis RT1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT1)
Testing Retevis RT1 brute force ... ok
test_clone (tests.TestCase_RetevisRT1)
Testing Retevis RT1 clone ... ok
test_copy_all (tests.TestCase_RetevisRT1)
Testing Retevis RT1 copy all ... ok
test_detect (tests.TestCase_RetevisRT1)
Testing Retevis RT1 detect ... ok
test_edges (tests.TestCase_RetevisRT1)
Testing Retevis RT1 edges ... ok
test_settings (tests.TestCase_RetevisRT1)
Testing Retevis RT1 settings ... ok
test_banks (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 brute force ... ok
test_clone (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 clone ... ok
test_copy_all (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 copy all ... ok
test_detect (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 detect ... ok
test_edges (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 edges ... ok
test_settings (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 settings ... ok
test_banks (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H banks ... ok
test_brute_force (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H brute force ... ok
test_clone (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H clone ... ok
test_copy_all (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H copy all ... ok
test_detect (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H detect ... ok
test_edges (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H edges ... ok
test_settings (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H settings ... ok
test_banks (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus brute force ... ok
test_clone (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus copy all ... ok
test_detect (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus detect ... ok
test_edges (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus edges ... ok
test_settings (tests.TestCase_WouxunKGUV9DPlus)
Testing Wouxun KG-UV9D Plus settings ... ok
test_banks (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 detect ... ok
test_edges (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 edges ... ok
test_settings (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M brute force ... ok
test_clone (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M clone ... ok
test_copy_all (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M copy all ... ok
test_detect (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M detect ... ok
test_edges (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M edges ... ok
test_settings (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M settings ... ok
test_banks (tests.TestCase_BaofengBFT8)
Testing Baofeng BF-T8 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengBFT8)
Testing Baofeng BF-T8 brute force ... ok
test_clone (tests.TestCase_BaofengBFT8)
Testing Baofeng BF-T8 clone ... ok
test_copy_all (tests.TestCase_BaofengBFT8)
Testing Baofeng BF-T8 copy all ... ok
test_detect (tests.TestCase_BaofengBFT8)
Testing Baofeng BF-T8 detect ... ok
test_edges (tests.TestCase_BaofengBFT8)
Testing Baofeng BF-T8 edges ... ok
test_settings (tests.TestCase_BaofengBFT8)
Testing Baofeng BF-T8 settings ... ok
test_banks (tests.TestCase_RetevisRT16)
Testing Retevis RT16 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT16)
Testing Retevis RT16 brute force ... ok
test_clone (tests.TestCase_RetevisRT16)
Testing Retevis RT16 clone ... ok
test_copy_all (tests.TestCase_RetevisRT16)
Testing Retevis RT16 copy all ... ok
test_detect (tests.TestCase_RetevisRT16)
Testing Retevis RT16 detect ... ok
test_edges (tests.TestCase_RetevisRT16)
Testing Retevis RT16 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT16)
Testing Retevis RT16 settings ... ok
test_banks (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 brute force ... ok
test_clone (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 clone ... ok
test_copy_all (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 copy all ... ok
test_detect (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 detect ... ok
test_edges (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 edges ... ok
test_settings (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 settings ... ok
test_banks (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 banks ... ok
test_brute_force (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 brute force ... ok
test_clone (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 clone ... ok
test_copy_all (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 copy all ... ok
test_detect (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 detect ... ok
test_edges (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 edges ... ok
test_settings (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH brute force ... ok
test_clone (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH clone ... ok
test_copy_all (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH copy all ... ok
test_detect (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH detect ... ok
test_edges (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH edges ... ok
test_settings (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH settings ... ok
test_banks (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R brute force ... ok
test_clone (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R clone ... ok
test_copy_all (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R copy all ... ok
test_detect (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R detect ... ok
test_edges (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R edges ... ok
test_settings (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R settings ... ok
test_banks (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P brute force ... ok
test_clone (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P clone ... ok
test_copy_all (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P copy all ... ok
test_detect (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P detect ... ok
test_edges (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P edges ... ok
test_settings (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P settings ... ok
test_banks (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 brute force ... ok
test_clone (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 copy all ... ok
test_detect (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 detect ... ok
test_edges (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 edges ... ok
test_settings (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 settings ... ok
test_banks (tests.TestCase_IcomICP7)
Testing Icom IC-P7 banks ... ok
test_brute_force (tests.TestCase_IcomICP7)
Testing Icom IC-P7 brute force ... ok
test_clone (tests.TestCase_IcomICP7)
Testing Icom IC-P7 clone ... ok
test_copy_all (tests.TestCase_IcomICP7)
Testing Icom IC-P7 copy all ... ok
test_detect (tests.TestCase_IcomICP7)
Testing Icom IC-P7 detect ... ok
test_edges (tests.TestCase_IcomICP7)
Testing Icom IC-P7 edges ... ok
test_settings (tests.TestCase_IcomICP7)
Testing Icom IC-P7 settings ... ok
test_banks (tests.TestCase_BaofengF11)
Testing Baofeng F-11 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengF11)
Testing Baofeng F-11 brute force ... ok
test_clone (tests.TestCase_BaofengF11)
Testing Baofeng F-11 clone ... ok
test_copy_all (tests.TestCase_BaofengF11)
Testing Baofeng F-11 copy all ... ok
test_detect (tests.TestCase_BaofengF11)
Testing Baofeng F-11 detect ... ok
test_edges (tests.TestCase_BaofengF11)
Testing Baofeng F-11 edges ... ok
test_settings (tests.TestCase_BaofengF11)
Testing Baofeng F-11 settings ... ok
test_banks (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R detect ... ok
test_edges (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R edges ... ok
test_settings (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S brute force ... ok
test_clone (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S clone ... ok
test_copy_all (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S copy all ... ok
test_detect (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S detect ... ok
test_edges (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S edges ... ok
test_settings (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S settings ... ok
test_banks (tests.TestCase_KYDIP620)
Testing KYD IP-620 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KYDIP620)
Testing KYD IP-620 brute force ... ok
test_clone (tests.TestCase_KYDIP620)
Testing KYD IP-620 clone ... ok
test_copy_all (tests.TestCase_KYDIP620)
Testing KYD IP-620 copy all ... ok
test_detect (tests.TestCase_KYDIP620)
Testing KYD IP-620 detect ... ok
test_edges (tests.TestCase_KYDIP620)
Testing KYD IP-620 edges ... ok
test_settings (tests.TestCase_KYDIP620)
Testing KYD IP-620 settings ... ok
test_banks (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M brute force ... ok
test_clone (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M copy all ... ok
test_detect (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M detect ... ok
test_edges (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M edges ... ok
test_settings (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R brute force ... ok
test_clone (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R clone ... ok
test_copy_all (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R copy all ... ok
test_detect (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R detect ... ok
test_edges (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R edges ... ok
test_settings (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R settings ... ok
test_banks (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR banks ... ok
test_brute_force (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR brute force ... ok
test_clone (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR clone ... ok
test_copy_all (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR copy all ... ok
test_detect (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR detect ... ok
test_edges (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR edges ... ok
test_settings (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR settings ... ok
test_banks (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) detect ... ok
test_edges (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) edges ... ok
test_settings (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) settings ... ok
test_banks (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R brute force ... ok
test_clone (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R clone ... ok
test_copy_all (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R copy all ... ok
test_detect (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R detect ... ok
test_edges (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R edges ... ok
test_settings (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R settings ... ok
test_banks (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 brute force ... ok
test_clone (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 copy all ... ok
test_detect (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 detect ... ok
test_edges (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 edges ... ok
test_settings (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 settings ... ok
test_banks (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A brute force ... ok
test_clone (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A clone ... ok
test_copy_all (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A copy all ... ok
test_detect (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A detect ... ok
test_edges (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A edges ... ok
test_settings (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A settings ... ok
test_banks (tests.TestCase_KYDNC630A)
Testing KYD NC-630A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KYDNC630A)
Testing KYD NC-630A brute force ... ok
test_clone (tests.TestCase_KYDNC630A)
Testing KYD NC-630A clone ... ok
test_copy_all (tests.TestCase_KYDNC630A)
Testing KYD NC-630A copy all ... ok
test_detect (tests.TestCase_KYDNC630A)
Testing KYD NC-630A detect ... ok
test_edges (tests.TestCase_KYDNC630A)
Testing KYD NC-630A edges ... ok
test_settings (tests.TestCase_KYDNC630A)
Testing KYD NC-630A settings ... ok
test_banks (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 detect ... ok
test_edges (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 edges ... ok
test_settings (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 settings ... ok
test_banks (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M brute force ... ok
test_clone (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M copy all ... ok
test_detect (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M detect ... ok
test_edges (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M edges ... ok
test_settings (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT21)
Testing Retevis RT21 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT21)
Testing Retevis RT21 brute force ... ok
test_clone (tests.TestCase_RetevisRT21)
Testing Retevis RT21 clone ... ok
test_copy_all (tests.TestCase_RetevisRT21)
Testing Retevis RT21 copy all ... ok
test_detect (tests.TestCase_RetevisRT21)
Testing Retevis RT21 detect ... ok
test_edges (tests.TestCase_RetevisRT21)
Testing Retevis RT21 edges ... ok
test_settings (tests.TestCase_RetevisRT21)
Testing Retevis RT21 settings ... ok
test_banks (tests.TestCase_IcomICT70)
Testing Icom IC-T70 banks ... ok
test_brute_force (tests.TestCase_IcomICT70)
Testing Icom IC-T70 brute force ... ok
test_clone (tests.TestCase_IcomICT70)
Testing Icom IC-T70 clone ... ok
test_copy_all (tests.TestCase_IcomICT70)
Testing Icom IC-T70 copy all ... ok
test_detect (tests.TestCase_IcomICT70)
Testing Icom IC-T70 detect ... ok
test_edges (tests.TestCase_IcomICT70)
Testing Icom IC-T70 edges ... ok
test_settings (tests.TestCase_IcomICT70)
Testing Icom IC-T70 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 brute force ... ok
test_clone (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 copy all ... ok
test_detect (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 detect ... ok
test_edges (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 edges ... ok
test_settings (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 settings ... ok
test_banks (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R brute force ... ok
test_clone (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R clone ... ok
test_copy_all (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R copy all ... ok
test_detect (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R detect ... ok
test_edges (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R edges ... ok
test_settings (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R settings ... ok
test_banks (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 banks ... ok
test_brute_force (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 brute force ... ok
test_clone (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 copy all ... ok
test_detect (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 detect ... ok
test_edges (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 edges ... ok
test_settings (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 detect ... ok
test_edges (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 edges ... ok
test_settings (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 settings ... ok
test_banks (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE banks ... ok
test_brute_force (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE brute force ... ok
test_clone (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE clone ... ok
test_copy_all (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE copy all ... ok
test_detect (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE detect ... ok
test_edges (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE edges ... ok
test_settings (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE settings ... ok
test_banks (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 brute force ... ok
test_clone (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 clone ... ok
test_copy_all (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 copy all ... ok
test_detect (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 detect ... ok
test_edges (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 edges ... ok
test_settings (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 settings ... ok
test_banks (tests.TestCase_RetevisRT22)
Testing Retevis RT22 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22)
Testing Retevis RT22 brute force ... ok
test_clone (tests.TestCase_RetevisRT22)
Testing Retevis RT22 clone ... ok
test_copy_all (tests.TestCase_RetevisRT22)
Testing Retevis RT22 copy all ... ok
test_detect (tests.TestCase_RetevisRT22)
Testing Retevis RT22 detect ... ok
test_edges (tests.TestCase_RetevisRT22)
Testing Retevis RT22 edges ... ok
test_settings (tests.TestCase_RetevisRT22)
Testing Retevis RT22 settings ... ok
test_banks (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H brute force ... ok
test_clone (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H clone ... ok
test_copy_all (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H copy all ... ok
test_detect (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H detect ... ok
test_edges (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H edges ... ok
test_settings (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) brute force ... ok
test_clone (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) clone ... ok
test_copy_all (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) copy all ... ok
test_detect (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) detect ... ok
test_edges (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) edges ... ok
test_settings (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) settings ... ok
test_banks (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 brute force ... ok
test_clone (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 clone ... ok
test_copy_all (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 copy all ... ok
test_detect (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 detect ... ok
test_edges (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 edges ... ok
test_settings (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 settings ... ok
test_banks (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R brute force ... ok
test_clone (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R clone ... ok
test_copy_all (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R copy all ... ok
test_detect (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R detect ... ok
test_edges (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R edges ... ok
test_settings (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R settings ... ok
test_banks (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 brute force ... ok
test_clone (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 copy all ... ok
test_detect (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 detect ... ok
test_edges (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 edges ... ok
test_settings (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R banks ... ok
test_brute_force (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R brute force ... ok
test_clone (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R clone ... ok
test_copy_all (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R copy all ... ok
test_detect (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R detect ... ok
test_edges (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R edges ... ok
test_settings (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R settings ... ok
test_banks (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D banks ... ok
test_brute_force (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D brute force ... ok
test_clone (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D clone ... ok
test_copy_all (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D copy all ... ok
test_detect (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D detect ... ok
test_edges (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D edges ... ok
test_settings (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D settings ... ok
test_banks (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M brute force ... ok
test_clone (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M clone ... ok
test_copy_all (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M copy all ... ok
test_detect (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M detect ... ok
test_edges (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M edges ... ok
test_settings (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M settings ... ok
test_banks (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS brute force ... ok
test_clone (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS clone ... ok
test_copy_all (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS copy all ... ok
test_detect (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS detect ... ok
test_edges (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS edges ... ok
test_settings (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS settings ... ok
test_banks (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A brute force ... ok
test_clone (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A clone ... ok
test_copy_all (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A copy all ... ok
test_detect (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A detect ... ok
test_edges (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A edges ... ok
test_settings (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 brute force ... ok
test_clone (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 clone ... ok
test_copy_all (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 copy all ... ok
test_detect (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 detect ... ok
test_edges (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 edges ... ok
test_settings (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 settings ... ok
test_banks (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 brute force ... ok
test_clone (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 clone ... ok
test_copy_all (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 copy all ... ok
test_detect (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 detect ... ok
test_edges (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 edges ... ok
test_settings (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 settings ... ok
test_banks (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G banks ... ok
test_brute_force (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G brute force ... ok
test_clone (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G clone ... ok
test_copy_all (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G copy all ... ok
test_detect (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G detect ... ok
test_edges (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G edges ... ok
test_settings (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G settings ... ok
test_banks (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S brute force ... ok
test_clone (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S clone ... ok
test_copy_all (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S copy all ... ok
test_detect (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S detect ... ok
test_edges (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT22S)
Testing Retevis RT22S settings ... ok
test_banks (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R banks ... ok
test_brute_force (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R brute force ... ok
test_clone (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R clone ... ok
test_copy_all (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R copy all ... ok
test_detect (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R detect ... ok
test_edges (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R edges ... ok
test_settings (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R settings ... ok
test_banks (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R brute force ... ok
test_clone (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R clone ... ok
test_copy_all (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R copy all ... ok
test_detect (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R detect ... ok
test_edges (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R edges ... ok
test_settings (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 banks ... ok
test_brute_force (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 brute force ... ok
test_clone (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 clone ... ok
test_copy_all (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 copy all ... ok
test_detect (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 detect ... ok
test_edges (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 edges ... ok
test_settings (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D banks ... ok
test_brute_force (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D brute force ... ok
test_clone (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D clone ... ok
test_copy_all (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D copy all ... ok
test_detect (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D detect ... ok
test_edges (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D edges ... ok
test_settings (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D settings ... ok
test_banks (tests.TestCase_VertexStandardFTL2011)
Testing Vertex Standard FTL-2011 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_VertexStandardFTL2011)
Testing Vertex Standard FTL-2011 brute force ... ok
test_clone (tests.TestCase_VertexStandardFTL2011)
Testing Vertex Standard FTL-2011 clone ... ok
test_copy_all (tests.TestCase_VertexStandardFTL2011)
Testing Vertex Standard FTL-2011 copy all ... ok
test_detect (tests.TestCase_VertexStandardFTL2011)
Testing Vertex Standard FTL-2011 detect ... ok
test_edges (tests.TestCase_VertexStandardFTL2011)
Testing Vertex Standard FTL-2011 edges ... ok
test_settings (tests.TestCase_VertexStandardFTL2011)
Testing Vertex Standard FTL-2011 settings ... ok
test_banks (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 brute force ... ok
test_clone (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 clone ... ok
test_copy_all (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 copy all ... ok
test_detect (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 detect ... ok
test_edges (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 edges ... ok
test_settings (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT23)
Testing Retevis RT23 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT23)
Testing Retevis RT23 brute force ... ok
test_clone (tests.TestCase_RetevisRT23)
Testing Retevis RT23 clone ... ok
test_copy_all (tests.TestCase_RetevisRT23)
Testing Retevis RT23 copy all ... ok
test_detect (tests.TestCase_RetevisRT23)
Testing Retevis RT23 detect ... ok
test_edges (tests.TestCase_RetevisRT23)
Testing Retevis RT23 edges ... ok
test_settings (tests.TestCase_RetevisRT23)
Testing Retevis RT23 settings ... ok
test_banks (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 brute force ... ok
test_clone (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 copy all ... ok
test_detect (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 detect ... ok
test_edges (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 edges ... ok
test_settings (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 settings ... ok
test_banks (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 brute force ... ok
test_clone (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 clone ... ok
test_copy_all (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 copy all ... ok
test_detect (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 detect ... ok
test_edges (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 edges ... ok
test_settings (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M brute force ... ok
test_clone (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M clone ... ok
test_copy_all (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M copy all ... ok
test_detect (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M detect ... ok
test_edges (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M edges ... ok
test_settings (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 brute force ... ok
test_clone (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 clone ... ok
test_copy_all (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 copy all ... ok
test_detect (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 detect ... ok
test_edges (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 edges ... ok
test_settings (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D banks ... ok
test_brute_force (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D brute force ... ok
test_clone (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D clone ... ok
test_copy_all (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D copy all ... ok
test_detect (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D detect ... ok
test_edges (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D edges ... ok
test_settings (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D settings ... ok
test_banks (tests.TestCase_RetevisRT26)
Testing Retevis RT26 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT26)
Testing Retevis RT26 brute force ... ok
test_clone (tests.TestCase_RetevisRT26)
Testing Retevis RT26 clone ... ok
test_copy_all (tests.TestCase_RetevisRT26)
Testing Retevis RT26 copy all ... ok
test_detect (tests.TestCase_RetevisRT26)
Testing Retevis RT26 detect ... ok
test_edges (tests.TestCase_RetevisRT26)
Testing Retevis RT26 edges ... ok
test_settings (tests.TestCase_RetevisRT26)
Testing Retevis RT26 settings ... ok
test_banks (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K brute force ... ok
test_clone (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K clone ... ok
test_copy_all (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K copy all ... ok
test_detect (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K detect ... ok
test_edges (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K edges ... ok
test_settings (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K settings ... ok
test_banks (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R banks ... ok
test_brute_force (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R brute force ... ok
test_clone (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R clone ... ok
test_copy_all (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R copy all ... ok
test_detect (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R detect ... ok
test_edges (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R edges ... ok
test_settings (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R settings ... ok
test_banks (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G banks ... ok
test_brute_force (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G brute force ... ok
test_clone (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G clone ... ok
test_copy_all (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G copy all ... ok
test_detect (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G detect ... ok
test_edges (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G edges ... ok
test_settings (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G settings ... ok
test_banks (tests.TestCase_RetevisRT622)
Testing Retevis RT622 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT622)
Testing Retevis RT622 brute force ... ok
test_clone (tests.TestCase_RetevisRT622)
Testing Retevis RT622 clone ... ok
test_copy_all (tests.TestCase_RetevisRT622)
Testing Retevis RT622 copy all ... ok
test_detect (tests.TestCase_RetevisRT622)
Testing Retevis RT622 detect ... ok
test_edges (tests.TestCase_RetevisRT622)
Testing Retevis RT622 edges ... ok
test_settings (tests.TestCase_RetevisRT622)
Testing Retevis RT622 settings ... ok
test_banks (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 brute force ... ok
test_clone (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 clone ... ok
test_copy_all (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 copy all ... ok
test_detect (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 detect ... ok
test_edges (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 edges ... ok
test_settings (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 settings ... ok
test_banks (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D brute force ... ok
test_clone (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D copy all ... ok
test_detect (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D detect ... ok
test_edges (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D edges ... ok
test_settings (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_QYTKT8R)
Testing QYT KT-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT8R)
Testing QYT KT-8R brute force ... ok
test_clone (tests.TestCase_QYTKT8R)
Testing QYT KT-8R clone ... ok
test_copy_all (tests.TestCase_QYTKT8R)
Testing QYT KT-8R copy all ... ok
test_detect (tests.TestCase_QYTKT8R)
Testing QYT KT-8R detect ... ok
test_edges (tests.TestCase_QYTKT8R)
Testing QYT KT-8R edges ... ok
test_settings (tests.TestCase_QYTKT8R)
Testing QYT KT-8R settings ... ok
test_banks (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 detect ... ok
test_edges (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 edges ... ok
test_settings (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 settings ... ok
test_banks (tests.TestCase_RetevisRT76)
Testing Retevis RT76 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT76)
Testing Retevis RT76 brute force ... ok
test_clone (tests.TestCase_RetevisRT76)
Testing Retevis RT76 clone ... ok
test_copy_all (tests.TestCase_RetevisRT76)
Testing Retevis RT76 copy all ... ok
test_detect (tests.TestCase_RetevisRT76)
Testing Retevis RT76 detect ... ok
test_edges (tests.TestCase_RetevisRT76)
Testing Retevis RT76 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT76)
Testing Retevis RT76 settings ... ok
test_banks (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D brute force ... ok
test_clone (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D clone ... ok
test_copy_all (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D copy all ... ok
test_detect (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D detect ... ok
test_edges (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D edges ... ok
test_settings (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D settings ... ok
test_banks (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D brute force ... ok
test_clone (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D clone ... ok
test_copy_all (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D copy all ... ok
test_detect (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D detect ... ok
test_edges (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D edges ... ok
test_settings (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D settings ... ok
test_banks (tests.TestCase_RetevisRT87)
Testing Retevis RT87 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT87)
Testing Retevis RT87 brute force ... ok
test_clone (tests.TestCase_RetevisRT87)
Testing Retevis RT87 clone ... ok
test_copy_all (tests.TestCase_RetevisRT87)
Testing Retevis RT87 copy all ... ok
test_detect (tests.TestCase_RetevisRT87)
Testing Retevis RT87 detect ... ok
test_edges (tests.TestCase_RetevisRT87)
Testing Retevis RT87 edges ... ok
test_settings (tests.TestCase_RetevisRT87)
Testing Retevis RT87 settings ... ok
test_banks (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR banks ... ok
test_brute_force (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR brute force ... ok
test_clone (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR clone ... ok
test_copy_all (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR copy all ... ok
test_detect (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR detect ... ok
test_edges (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR edges ... ok
test_settings (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR settings ... ok
test_banks (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 detect ... ok
test_edges (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 edges ... ok
test_settings (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 settings ... ok
test_banks (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D brute force ... ok
test_clone (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D clone ... ok
test_copy_all (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D copy all ... ok
test_detect (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D detect ... ok
test_edges (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D edges ... ok
test_settings (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D settings ... ok
test_banks (tests.TestCase_RetevisRT9000D136174)
Testing Retevis RT9000D_136-174 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT9000D136174)
Testing Retevis RT9000D_136-174 brute force ... ok
test_clone (tests.TestCase_RetevisRT9000D136174)
Testing Retevis RT9000D_136-174 clone ... ok
test_copy_all (tests.TestCase_RetevisRT9000D136174)
Testing Retevis RT9000D_136-174 copy all ... ok
test_detect (tests.TestCase_RetevisRT9000D136174)
Testing Retevis RT9000D_136-174 detect ... ok
test_edges (tests.TestCase_RetevisRT9000D136174)
Testing Retevis RT9000D_136-174 edges ... ok
test_settings (tests.TestCase_RetevisRT9000D136174)
Testing Retevis RT9000D_136-174 settings ... ok
test_banks (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE banks ... ok
test_brute_force (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE brute force ... ok
test_clone (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE clone ... ok
test_copy_all (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE copy all ... ok
test_detect (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE detect ... ok
test_edges (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE edges ... ok
test_settings (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE settings ... ok
test_banks (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR banks ... ok
test_brute_force (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR brute force ... ok
test_clone (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR clone ... ok
test_copy_all (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR copy all ... ok
test_detect (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR detect ... ok
test_edges (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR edges ... ok
test_settings (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR settings ... ok
----------------------------------------------------------------------
Ran 1148 tests in 497.845s
OK (skipped=162)
struct memory {
bbcd rx_freq[4];
bbcd tx_freq[4];
lbcd rx_tone[2];
lbcd tx_tone[2];
u8 unknown10:5,
highpower:1,
unknown11:2;
u8 unknown20:4,
narrow:1,
unknown21:3;
u8 unknown31:1,
scanadd:1,
unknown32:6;
u8 unknown4;
};
struct name {
char name[7];
};
#seekto 0x0010;
struct memory channels[128];
#seekto 0x08C0;
struct name names[128];
#seekto 0x2020;
struct memory vfo1;
struct memory vfo2;
style create: /chirp/.tox/style
style installdeps: pep8==1.6.2, future
style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
style run-test-pre: PYTHONHASHSEED='1086925647'
style run-test: commands[0] | python ./tools/cpep8.py
./chirp/ui/mainapp.py:546:35: E711 comparison to None should be 'if cond is None:'
./chirp/ui/mainapp.py:2108:80: E501 line too long (81 > 79 characters)
ERROR: InvocationError for command /chirp/.tox/style/bin/python ./tools/cpep8.py (exited with code 1)
___________________________________ summary ____________________________________
unit: commands succeeded
driver: commands succeeded
ERROR: style: commands failed
Build step 'Execute shell' marked build as failure
Email was triggered for: Failure
Sending email for trigger: Failure
More information about the chirp_devel
mailing list