[chirp_devel] Py3 Branch - Catching Up

[Matthew Poletiek]

Thanks Martin,

I've been using Chirp to configure my baofeng bf-8hp. Didn't take much for
me to get it working initially so I'll try the new repo out as soon as I
get a chance.

- Sent From My Phone

On Thu, Nov 4, 2021, 20:29 Martin Cooper <mfncooper at gmail.com> wrote:

> Hi Matthew,
>
> As you've noticed, Dan created a GitHub repo that is indeed a mirror of
> the Mercurial repo. A few people, including myself, have been submitting
> pull requests there, both for master and for the py3 branch. Have a look at
> the closed pull requests to see what's been going on there specifically.
>
> As for the state of the py3 branch, I've got the icomciv live-mode driver
> working, at least for the IC-910H, though others should work too. I can
> bring up the wxPython GUI and read all of the memories from the radio,
> including special memories. I can't write back from the GUI, though, since
> writing changes from a live-mode radio isn't hooked up in the GUI. I looked
> at it briefly, but my impression was that there's a design in mind that
> isn't all there yet, and I wasn't sure I understood the intent, so I didn't
> attempt to tackle it. On the other hand, I'm able to write changes to the
> radio using chirpc, so I know that the driver is working for write too.
>
> More recently I've been waylaid by other projects, and haven't got back to
> getting more working on the py3 branch. I do want to pick up where I left
> off, though, at some point.
>
> Martin.
> KD6YAM
>
> On Thu, Nov 4, 2021 at 8:37 AM Matthew Poletiek via chirp_devel <
> chirp_devel at intrepid.danplanet.com> wrote:
>
>> Hi Everyone,
>>
>> Apologies for not responding sooner, but it seemed like enough has
>> changed I thought I'd start a new thread.
>>
>> I'm obviously not active enough to contribute much to this branch.
>>
>> I don't want to cause confusion by keeping my fork on github public
>> (https://github.com/mpoletiek/py3-CHIRP). However, this version is
>> working for me currently so I don't want to lose it quite yet.
>>
>> I noticed there is another github repo as well
>> (https://github.com/kk7ds/chirp). Is this a mirror of Mercurial? Are
>> we accepting py3 contributions here?
>>
>> Has anyone else gotten the py3 branch in its current state working
>> enough to configure their radios?
>>
>> The next chance I get I'll try the latest py3 branch and if it works
>> for me I'll delete my repo.
>>
>> Thanks,
>> -------------------------------------------
>> Matthew Poletiek
>> 303.810.9082
>> matthew.poletiek at gmail.com
>> www.matthewpoletiek.com
>> _______________________________________________
>> chirp_devel mailing list
>> chirp_devel at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
>> Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20211104/9e1883a4/attachment-0001.html