[chirp_devel] Build test results: Fixed
Mark Leigh
Fri Jan 8 21:09:19 PST 2021
FYI; as it seems to have gone undetected until now, but the launchpad
PPA daily builds for Dec 21 all failed to build. It looks like you're
about ready to do another daily, so perhaps this will be fixed?
Thanks,
-Mark
On 2021-01-08 8:34 p.m., Build System via chirp_devel wrote:
> Tested changes:
>
> Changes for Build #902
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: vgc.py
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
>
> fixes #8633
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: uv6r.py
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
>
> fixes #8631
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: tdxone_tdq8a.py
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
> 3. Remove unused code
>
> fixes #8629
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: retevis_rt26.py
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
>
> fixes #8627
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: retevis_rt23.py
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
>
> fixes #8625
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: retevis_rt21.py
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
>
> fixes #8623
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: retevis_rt1
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
>
> fixes #8621
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: mursv1.py
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
>
> fixes #8619
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: lt725uv.py
>
> 1. Add to PEP8 manifext
> 2. Perform PEP8 cleanup
>
> fixes #8617
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: gmrsuv1.py
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
>
> fixes #8615
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: baofeng_common.py
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
>
> fixes #8613
>
> [Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: anytone_ht.py
>
> 1. Add to PEP8 manifest
> 2. Perform PEP8 cleanup
>
> fixes #8611
>
> [Jim Unroe <rock.unroe at gmail.com>] [UV-5X3] Cannot disable RESET Menu in BTECH UV-5X3 (replacement)
>
> This patch maps "reset" to the correct memory location
>
> fixes #8609
>
> [Jim Unroe <rock.unroe at gmail.com>] [UV-5X3] PEP8 Cleanup
>
> This patch does PEP8 Cleanup prior to fixing bug #8609. There are
> otherwise no changes to any features or settings.
>
> [Jim Unroe <rock.unroe at gmail.com>] [QB25] Add MCU Version for Radioddity QB25
>
> This patch adds and additional MCU Version to support the Radioddity QB25
> quad-band mobile radio.
>
> fixes #8599
>
> [Jim Unroe <rock.unroe at gmail.com>] [BTECH] Add QYT KT5800 Support
>
> This patch adds support for the QYT KT-5800 dual-band mobile radio
>
> related to #6493
>
> [Jim Unroe <rock.unroe at gmail.com>] [RT85] Add Support for Retevis RT85
>
> This patch adds support for the Retevis RT85.
>
> Related to #8575
>
> [Rick DeWitt <aa0rd at yahoo.com>] [th_uv8000] Allow scan priority channel 0 (OFF). Issue #8339
>
> [Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281
>
> [Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141
>
> [Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281
>
> [Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292
>
> [Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
>
> [Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231
>
> [Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
>
> [Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
> Fixes #214
>
> [Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117
>
> [Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
> Fix bug #181
>
> [Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176
>
> [Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
> Fixes #172
>
> [David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels
>
> [David Griffith <dave at 661.org>] New INSTALL and README files
> Fixes #122
>
> [Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166
>
> [Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
> Same as #88 for FT857, to avoid code duplication fix code have been moved from
> ft857 to its ancestor class
> Fix bug #163
>
> [Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145
>
>
> Changes for Build #903
> [Mark Leigh <mark.leigh at shaw.ca>] Fixed Canadian RR.com search county names. Fixes #8579
>
> The Canadian Radioreference.com import/query feature does not properly
> check which province is selected. This results in counties with the same
> name in two different provinces returning erroneous data. This is the fix.
>
> [Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281
>
> [Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141
>
> [Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281
>
> [Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292
>
> [Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
>
> [Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231
>
> [Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
>
> [Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
> Fixes #214
>
> [Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117
>
> [Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
> Fix bug #181
>
> [Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176
>
> [Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
> Fixes #172
>
> [David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels
>
> [David Griffith <dave at 661.org>] New INSTALL and README files
> Fixes #122
>
> [Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166
>
> [Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
> Same as #88 for FT857, to avoid code duplication fix code have been moved from
> ft857 to its ancestor class
> Fix bug #163
>
> [Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145
>
>
> Changes for Build #904
> [Dan Smith <dsmith at danplanet.com>] Fix case mismatch in cpep8 manifest
>
> This doesn't matter on case-insensive systems, but does elsewhere.
>
> Related to the fix for #8609
>
> [Jim Unroe <rock.unroe at gmail.com>] [UV5R] RT-5R and RT-5RV: Remove "-" from Model Name
>
> This patch removed the "-" from the radio's model name.
>
> RT-5R ==> RT5R
> FT-5RV ==> RT5RV
>
> This will break older versions of chirp when they try to open images saved
> from newer ones for no real reason, but backwards compatibility going forward
> is preserved, which is the important thing.
>
> #8583
>
> (with some edits from Dan Smith)
>
> [Dan Smith <dsmith at danplanet.com>] Add vendor/model compatibility mapping to directory
>
> This allows us to change radio model identification over time in the
> rare circumstances where it is appropriate or necessary.
>
> Preparation for #8583
>
> [Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281
>
> [Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141
>
> [Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281
>
> [Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292
>
> [Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
>
> [Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231
>
> [Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
>
> [Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
> Fixes #214
>
> [Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117
>
> [Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
> Fix bug #181
>
> [Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176
>
> [Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
> Fixes #172
>
> [David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels
>
> [David Griffith <dave at 661.org>] New INSTALL and README files
> Fixes #122
>
> [Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166
>
> [Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
> Same as #88 for FT857, to avoid code duplication fix code have been moved from
> ft857 to its ancestor class
> Fix bug #163
>
> [Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145
>
>
>
>
> Full log:
>
> [...truncated 760 lines...]
> test_copy_all (tests.TestCase_IcomICV82U82)
> Testing Icom IC-V82/U82 copy all ... ok
> test_detect (tests.TestCase_IcomICV82U82)
> Testing Icom IC-V82/U82 detect ... ok
> test_edges (tests.TestCase_IcomICV82U82)
> Testing Icom IC-V82/U82 edges ... ok
> test_settings (tests.TestCase_IcomICV82U82)
> Testing Icom IC-V82/U82 settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_BoblovX3Plus)
> Testing Boblov X3Plus banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BoblovX3Plus)
> Testing Boblov X3Plus brute force ... ok
> test_clone (tests.TestCase_BoblovX3Plus)
> Testing Boblov X3Plus clone ... ok
> test_copy_all (tests.TestCase_BoblovX3Plus)
> Testing Boblov X3Plus copy all ... ok
> test_detect (tests.TestCase_BoblovX3Plus)
> Testing Boblov X3Plus detect ... ok
> test_edges (tests.TestCase_BoblovX3Plus)
> Testing Boblov X3Plus edges ... ok
> test_settings (tests.TestCase_BoblovX3Plus)
> Testing Boblov X3Plus settings ... ok
> test_banks (tests.TestCase_BTECHMURSV1)
> Testing BTECH MURS-V1 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BTECHMURSV1)
> Testing BTECH MURS-V1 brute force ... ok
> test_clone (tests.TestCase_BTECHMURSV1)
> Testing BTECH MURS-V1 clone ... ok
> test_copy_all (tests.TestCase_BTECHMURSV1)
> Testing BTECH MURS-V1 copy all ... ok
> test_detect (tests.TestCase_BTECHMURSV1)
> Testing BTECH MURS-V1 detect ... ok
> test_edges (tests.TestCase_BTECHMURSV1)
> Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found'
> test_settings (tests.TestCase_BTECHMURSV1)
> Testing BTECH MURS-V1 settings ... ok
> test_banks (tests.TestCase_YaesuVX7)
> Testing Yaesu VX-7 banks ... ok
> test_brute_force (tests.TestCase_YaesuVX7)
> Testing Yaesu VX-7 brute force ... ok
> test_clone (tests.TestCase_YaesuVX7)
> Testing Yaesu VX-7 clone ... ok
> test_copy_all (tests.TestCase_YaesuVX7)
> Testing Yaesu VX-7 copy all ... ok
> test_detect (tests.TestCase_YaesuVX7)
> Testing Yaesu VX-7 detect ... ok
> test_edges (tests.TestCase_YaesuVX7)
> Testing Yaesu VX-7 edges ... ok
> test_settings (tests.TestCase_YaesuVX7)
> Testing Yaesu VX-7 settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_TYTTH9800)
> Testing TYT TH-9800 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_TYTTH9800)
> Testing TYT TH-9800 brute force ... ok
> test_clone (tests.TestCase_TYTTH9800)
> Testing TYT TH-9800 clone ... ok
> test_copy_all (tests.TestCase_TYTTH9800)
> Testing TYT TH-9800 copy all ... ok
> test_detect (tests.TestCase_TYTTH9800)
> Testing TYT TH-9800 detect ... ok
> test_edges (tests.TestCase_TYTTH9800)
> Testing TYT TH-9800 edges ... ok
> test_settings (tests.TestCase_TYTTH9800)
> Testing TYT TH-9800 settings ... ok
> test_banks (tests.TestCase_QYTKT7900D)
> Testing QYT KT7900D banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_QYTKT7900D)
> Testing QYT KT7900D brute force ... ok
> test_clone (tests.TestCase_QYTKT7900D)
> Testing QYT KT7900D clone ... ok
> test_copy_all (tests.TestCase_QYTKT7900D)
> Testing QYT KT7900D copy all ... ok
> test_detect (tests.TestCase_QYTKT7900D)
> Testing QYT KT7900D detect ... ok
> test_edges (tests.TestCase_QYTKT7900D)
> Testing QYT KT7900D edges ... ok
> test_settings (tests.TestCase_QYTKT7900D)
> Testing QYT KT7900D settings ... ok
> test_banks (tests.TestCase_IcomICW32A)
> Testing Icom IC-W32A banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_IcomICW32A)
> Testing Icom IC-W32A brute force ... ok
> test_clone (tests.TestCase_IcomICW32A)
> Testing Icom IC-W32A clone ... ok
> test_copy_all (tests.TestCase_IcomICW32A)
> Testing Icom IC-W32A copy all ... ok
> test_detect (tests.TestCase_IcomICW32A)
> Testing Icom IC-W32A detect ... ok
> test_edges (tests.TestCase_IcomICW32A)
> Testing Icom IC-W32A edges ... ok
> test_settings (tests.TestCase_IcomICW32A)
> Testing Icom IC-W32A settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_WouxunKGUV8E)
> Testing Wouxun KG-UV8E banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_WouxunKGUV8E)
> Testing Wouxun KG-UV8E brute force ... ok
> test_clone (tests.TestCase_WouxunKGUV8E)
> Testing Wouxun KG-UV8E clone ... ok
> test_copy_all (tests.TestCase_WouxunKGUV8E)
> Testing Wouxun KG-UV8E copy all ... ok
> test_detect (tests.TestCase_WouxunKGUV8E)
> Testing Wouxun KG-UV8E detect ... ok
> test_edges (tests.TestCase_WouxunKGUV8E)
> Testing Wouxun KG-UV8E edges ... ok
> test_settings (tests.TestCase_WouxunKGUV8E)
> Testing Wouxun KG-UV8E settings ... ok
> test_banks (tests.TestCase_YaesuFT70D)
> Testing Yaesu FT-70D banks ... ok
> test_brute_force (tests.TestCase_YaesuFT70D)
> Testing Yaesu FT-70D brute force ... ok
> test_clone (tests.TestCase_YaesuFT70D)
> Testing Yaesu FT-70D clone ... ok
> test_copy_all (tests.TestCase_YaesuFT70D)
> Testing Yaesu FT-70D copy all ... ok
> test_detect (tests.TestCase_YaesuFT70D)
> Testing Yaesu FT-70D detect ... ok
> test_edges (tests.TestCase_YaesuFT70D)
> Testing Yaesu FT-70D edges ... ok
> test_settings (tests.TestCase_YaesuFT70D)
> Testing Yaesu FT-70D settings ... ok
> test_banks (tests.TestCase_BTECHUV2501220)
> Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BTECHUV2501220)
> Testing BTECH UV-2501+220 brute force ... ok
> test_clone (tests.TestCase_BTECHUV2501220)
> Testing BTECH UV-2501+220 clone ... ok
> test_copy_all (tests.TestCase_BTECHUV2501220)
> Testing BTECH UV-2501+220 copy all ... ok
> test_detect (tests.TestCase_BTECHUV2501220)
> Testing BTECH UV-2501+220 detect ... ok
> test_edges (tests.TestCase_BTECHUV2501220)
> Testing BTECH UV-2501+220 edges ... ok
> test_settings (tests.TestCase_BTECHUV2501220)
> Testing BTECH UV-2501+220 settings ... ok
> test_banks (tests.TestCase_CRTMicronUV)
> Testing CRT Micron UV banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_CRTMicronUV)
> Testing CRT Micron UV brute force ... ok
> test_clone (tests.TestCase_CRTMicronUV)
> Testing CRT Micron UV clone ... ok
> test_copy_all (tests.TestCase_CRTMicronUV)
> Testing CRT Micron UV copy all ... ok
> test_detect (tests.TestCase_CRTMicronUV)
> Testing CRT Micron UV detect ... ok
> test_edges (tests.TestCase_CRTMicronUV)
> Testing CRT Micron UV edges ... ok
> test_settings (tests.TestCase_CRTMicronUV)
> Testing CRT Micron UV settings ... ok
> test_banks (tests.TestCase_KenwoodTK3180K2)
> Testing Kenwood TK-3180K2 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_KenwoodTK3180K2)
> Testing Kenwood TK-3180K2 brute force ... ok
> test_clone (tests.TestCase_KenwoodTK3180K2)
> Testing Kenwood TK-3180K2 clone ... ok
> test_copy_all (tests.TestCase_KenwoodTK3180K2)
> Testing Kenwood TK-3180K2 copy all ... ok
> test_detect (tests.TestCase_KenwoodTK3180K2)
> Testing Kenwood TK-3180K2 detect ... ok
> test_edges (tests.TestCase_KenwoodTK3180K2)
> Testing Kenwood TK-3180K2 edges ... ok
> test_settings (tests.TestCase_KenwoodTK3180K2)
> Testing Kenwood TK-3180K2 settings ... ok
> test_banks (tests.TestCase_IcomICW32E)
> Testing Icom IC-W32E banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_IcomICW32E)
> Testing Icom IC-W32E brute force ... ok
> test_clone (tests.TestCase_IcomICW32E)
> Testing Icom IC-W32E clone ... ok
> test_copy_all (tests.TestCase_IcomICW32E)
> Testing Icom IC-W32E copy all ... ok
> test_detect (tests.TestCase_IcomICW32E)
> Testing Icom IC-W32E detect ... ok
> test_edges (tests.TestCase_IcomICW32E)
> Testing Icom IC-W32E edges ... ok
> test_settings (tests.TestCase_IcomICW32E)
> Testing Icom IC-W32E settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_TYTTHUV3R25)
> Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_TYTTHUV3R25)
> Testing TYT TH-UV3R-25 brute force ... ok
> test_clone (tests.TestCase_TYTTHUV3R25)
> Testing TYT TH-UV3R-25 clone ... ok
> test_copy_all (tests.TestCase_TYTTHUV3R25)
> Testing TYT TH-UV3R-25 copy all ... ok
> test_detect (tests.TestCase_TYTTHUV3R25)
> Testing TYT TH-UV3R-25 detect ... ok
> test_edges (tests.TestCase_TYTTHUV3R25)
> Testing TYT TH-UV3R-25 edges ... ok
> test_settings (tests.TestCase_TYTTHUV3R25)
> Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_BTECHUV25X2)
> Testing BTECH UV-25X2 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BTECHUV25X2)
> Testing BTECH UV-25X2 brute force ... ok
> test_clone (tests.TestCase_BTECHUV25X2)
> Testing BTECH UV-25X2 clone ... ok
> test_copy_all (tests.TestCase_BTECHUV25X2)
> Testing BTECH UV-25X2 copy all ... ok
> test_detect (tests.TestCase_BTECHUV25X2)
> Testing BTECH UV-25X2 detect ... ok
> test_edges (tests.TestCase_BTECHUV25X2)
> Testing BTECH UV-25X2 edges ... ok
> test_settings (tests.TestCase_BTECHUV25X2)
> Testing BTECH UV-25X2 settings ... ok
> test_banks (tests.TestCase_QYTKT8900D)
> Testing QYT KT8900D banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_QYTKT8900D)
> Testing QYT KT8900D brute force ... ok
> test_clone (tests.TestCase_QYTKT8900D)
> Testing QYT KT8900D clone ... ok
> test_copy_all (tests.TestCase_QYTKT8900D)
> Testing QYT KT8900D copy all ... ok
> test_detect (tests.TestCase_QYTKT8900D)
> Testing QYT KT8900D detect ... ok
> test_edges (tests.TestCase_QYTKT8900D)
> Testing QYT KT8900D edges ... ok
> test_settings (tests.TestCase_QYTKT8900D)
> Testing QYT KT8900D settings ... ok
> test_banks (tests.TestCase_YaesuFT7100M)
> Testing Yaesu FT-7100M banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT7100M)
> Testing Yaesu FT-7100M brute force ... ok
> test_clone (tests.TestCase_YaesuFT7100M)
> Testing Yaesu FT-7100M clone ... ok
> test_copy_all (tests.TestCase_YaesuFT7100M)
> Testing Yaesu FT-7100M copy all ... ok
> test_detect (tests.TestCase_YaesuFT7100M)
> Testing Yaesu FT-7100M detect ... ok
> test_edges (tests.TestCase_YaesuFT7100M)
> Testing Yaesu FT-7100M edges ... ok
> test_settings (tests.TestCase_YaesuFT7100M)
> Testing Yaesu FT-7100M settings ... ok
> test_banks (tests.TestCase_WouxunKGUV9DPlus)
> Testing Wouxun KG-UV9D Plus banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_WouxunKGUV9DPlus)
> Testing Wouxun KG-UV9D Plus brute force ... ok
> test_clone (tests.TestCase_WouxunKGUV9DPlus)
> Testing Wouxun KG-UV9D Plus clone ... ok
> test_copy_all (tests.TestCase_WouxunKGUV9DPlus)
> Testing Wouxun KG-UV9D Plus copy all ... ok
> test_detect (tests.TestCase_WouxunKGUV9DPlus)
> Testing Wouxun KG-UV9D Plus detect ... ok
> test_edges (tests.TestCase_WouxunKGUV9DPlus)
> Testing Wouxun KG-UV9D Plus edges ... ok
> test_settings (tests.TestCase_WouxunKGUV9DPlus)
> Testing Wouxun KG-UV9D Plus settings ... ok
> test_banks (tests.TestCase_FeidaxinFD268A)
> Testing Feidaxin FD-268A banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_FeidaxinFD268A)
> Testing Feidaxin FD-268A brute force ... ok
> test_clone (tests.TestCase_FeidaxinFD268A)
> Testing Feidaxin FD-268A clone ... ok
> test_copy_all (tests.TestCase_FeidaxinFD268A)
> Testing Feidaxin FD-268A copy all ... ok
> test_detect (tests.TestCase_FeidaxinFD268A)
> Testing Feidaxin FD-268A detect ... ok
> test_edges (tests.TestCase_FeidaxinFD268A)
> Testing Feidaxin FD-268A edges ... ok
> test_settings (tests.TestCase_FeidaxinFD268A)
> Testing Feidaxin FD-268A settings ... ok
> test_banks (tests.TestCase_YaesuVX8DR)
> Testing Yaesu VX-8DR banks ... ok
> test_brute_force (tests.TestCase_YaesuVX8DR)
> Testing Yaesu VX-8DR brute force ... ok
> test_clone (tests.TestCase_YaesuVX8DR)
> Testing Yaesu VX-8DR clone ... ok
> test_copy_all (tests.TestCase_YaesuVX8DR)
> Testing Yaesu VX-8DR copy all ... ok
> test_detect (tests.TestCase_YaesuVX8DR)
> Testing Yaesu VX-8DR detect ... ok
> test_edges (tests.TestCase_YaesuVX8DR)
> Testing Yaesu VX-8DR edges ... ok
> test_settings (tests.TestCase_YaesuVX8DR)
> Testing Yaesu VX-8DR settings ... ok
> test_banks (tests.TestCase_TYTTHUV3R)
> Testing TYT TH-UV3R banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_TYTTHUV3R)
> Testing TYT TH-UV3R brute force ... ok
> test_clone (tests.TestCase_TYTTHUV3R)
> Testing TYT TH-UV3R clone ... ok
> test_copy_all (tests.TestCase_TYTTHUV3R)
> Testing TYT TH-UV3R copy all ... ok
> test_detect (tests.TestCase_TYTTHUV3R)
> Testing TYT TH-UV3R detect ... ok
> test_edges (tests.TestCase_TYTTHUV3R)
> Testing TYT TH-UV3R edges ... ok
> test_settings (tests.TestCase_TYTTHUV3R)
> Testing TYT TH-UV3R settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_KenwoodTK760G)
> Testing Kenwood TK-760G banks ... ok
> test_brute_force (tests.TestCase_KenwoodTK760G)
> Testing Kenwood TK-760G brute force ... ok
> test_clone (tests.TestCase_KenwoodTK760G)
> Testing Kenwood TK-760G clone ... ok
> test_copy_all (tests.TestCase_KenwoodTK760G)
> Testing Kenwood TK-760G copy all ... ok
> test_detect (tests.TestCase_KenwoodTK760G)
> Testing Kenwood TK-760G detect ... ok
> test_edges (tests.TestCase_KenwoodTK760G)
> Testing Kenwood TK-760G edges ... ok
> test_settings (tests.TestCase_KenwoodTK760G)
> Testing Kenwood TK-760G settings ... ok
> test_banks (tests.TestCase_BTECHUV25X4)
> Testing BTECH UV-25X4 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BTECHUV25X4)
> Testing BTECH UV-25X4 brute force ... ok
> test_clone (tests.TestCase_BTECHUV25X4)
> Testing BTECH UV-25X4 clone ... ok
> test_copy_all (tests.TestCase_BTECHUV25X4)
> Testing BTECH UV-25X4 copy all ... ok
> test_detect (tests.TestCase_BTECHUV25X4)
> Testing BTECH UV-25X4 detect ... ok
> test_edges (tests.TestCase_BTECHUV25X4)
> Testing BTECH UV-25X4 edges ... ok
> test_settings (tests.TestCase_BTECHUV25X4)
> Testing BTECH UV-25X4 settings ... ok
> test_banks (tests.TestCase_RadioddityGA510)
> Testing Radioddity GA-510 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RadioddityGA510)
> Testing Radioddity GA-510 brute force ... ok
> test_clone (tests.TestCase_RadioddityGA510)
> Testing Radioddity GA-510 clone ... ok
> test_copy_all (tests.TestCase_RadioddityGA510)
> Testing Radioddity GA-510 copy all ... ok
> test_detect (tests.TestCase_RadioddityGA510)
> Testing Radioddity GA-510 detect ... ok
> test_edges (tests.TestCase_RadioddityGA510)
> Testing Radioddity GA-510 edges ... ok
> test_settings (tests.TestCase_RadioddityGA510)
> Testing Radioddity GA-510 settings ... ok
> test_banks (tests.TestCase_YaesuFT78007900)
> Testing Yaesu FT-7800/7900 banks ... ok
> test_brute_force (tests.TestCase_YaesuFT78007900)
> Testing Yaesu FT-7800/7900 brute force ... ok
> test_clone (tests.TestCase_YaesuFT78007900)
> Testing Yaesu FT-7800/7900 clone ... ok
> test_copy_all (tests.TestCase_YaesuFT78007900)
> Testing Yaesu FT-7800/7900 copy all ... ok
> test_detect (tests.TestCase_YaesuFT78007900)
> Testing Yaesu FT-7800/7900 detect ... ok
> test_edges (tests.TestCase_YaesuFT78007900)
> Testing Yaesu FT-7800/7900 edges ... ok
> test_settings (tests.TestCase_YaesuFT78007900)
> Testing Yaesu FT-7800/7900 settings ... ok
> test_banks (tests.TestCase_IcomID31A)
> Testing Icom ID-31A banks ... ok
> test_brute_force (tests.TestCase_IcomID31A)
> Testing Icom ID-31A brute force ... ok
> test_clone (tests.TestCase_IcomID31A)
> Testing Icom ID-31A clone ... ok
> test_copy_all (tests.TestCase_IcomID31A)
> Testing Icom ID-31A copy all ... ok
> test_detect (tests.TestCase_IcomID31A)
> Testing Icom ID-31A detect ... ok
> test_edges (tests.TestCase_IcomID31A)
> Testing Icom ID-31A edges ... ok
> test_settings (tests.TestCase_IcomID31A)
> Testing Icom ID-31A settings ... ok
> test_banks (tests.TestCase_WouxunKGUVD1P)
> Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_WouxunKGUVD1P)
> Testing Wouxun KG-UVD1P brute force ... ok
> test_clone (tests.TestCase_WouxunKGUVD1P)
> Testing Wouxun KG-UVD1P clone ... ok
> test_copy_all (tests.TestCase_WouxunKGUVD1P)
> Testing Wouxun KG-UVD1P copy all ... ok
> test_detect (tests.TestCase_WouxunKGUVD1P)
> Testing Wouxun KG-UVD1P detect ... ok
> test_edges (tests.TestCase_WouxunKGUVD1P)
> Testing Wouxun KG-UVD1P edges ... ok
> test_settings (tests.TestCase_WouxunKGUVD1P)
> Testing Wouxun KG-UVD1P settings ... ok
> test_banks (tests.TestCase_FeidaxinFD268B)
> Testing Feidaxin FD-268B banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_FeidaxinFD268B)
> Testing Feidaxin FD-268B brute force ... ok
> test_clone (tests.TestCase_FeidaxinFD268B)
> Testing Feidaxin FD-268B clone ... ok
> test_copy_all (tests.TestCase_FeidaxinFD268B)
> Testing Feidaxin FD-268B copy all ... ok
> test_detect (tests.TestCase_FeidaxinFD268B)
> Testing Feidaxin FD-268B detect ... ok
> test_edges (tests.TestCase_FeidaxinFD268B)
> Testing Feidaxin FD-268B edges ... ok
> test_settings (tests.TestCase_FeidaxinFD268B)
> Testing Feidaxin FD-268B settings ... ok
> test_banks (tests.TestCase_TYTTHUV8000)
> Testing TYT TH-UV8000 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_TYTTHUV8000)
> Testing TYT TH-UV8000 brute force ... ok
> test_clone (tests.TestCase_TYTTHUV8000)
> Testing TYT TH-UV8000 clone ... ok
> test_copy_all (tests.TestCase_TYTTHUV8000)
> Testing TYT TH-UV8000 copy all ... ok
> test_detect (tests.TestCase_TYTTHUV8000)
> Testing TYT TH-UV8000 detect ... ok
> test_edges (tests.TestCase_TYTTHUV8000)
> Testing TYT TH-UV8000 edges ... ok
> test_settings (tests.TestCase_TYTTHUV8000)
> Testing TYT TH-UV8000 settings ... ok
> test_banks (tests.TestCase_KenwoodTK8102)
> Testing Kenwood TK-8102 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_KenwoodTK8102)
> Testing Kenwood TK-8102 brute force ... ok
> test_clone (tests.TestCase_KenwoodTK8102)
> Testing Kenwood TK-8102 clone ... ok
> test_copy_all (tests.TestCase_KenwoodTK8102)
> Testing Kenwood TK-8102 copy all ... ok
> test_detect (tests.TestCase_KenwoodTK8102)
> Testing Kenwood TK-8102 detect ... ok
> test_edges (tests.TestCase_KenwoodTK8102)
> Testing Kenwood TK-8102 edges ... ok
> test_settings (tests.TestCase_KenwoodTK8102)
> Testing Kenwood TK-8102 settings ... ok
> test_banks (tests.TestCase_BTECHUV5001)
> Testing BTECH UV-5001 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BTECHUV5001)
> Testing BTECH UV-5001 brute force ... ok
> test_clone (tests.TestCase_BTECHUV5001)
> Testing BTECH UV-5001 clone ... ok
> test_copy_all (tests.TestCase_BTECHUV5001)
> Testing BTECH UV-5001 copy all ... ok
> test_detect (tests.TestCase_BTECHUV5001)
> Testing BTECH UV-5001 detect ... ok
> test_edges (tests.TestCase_BTECHUV5001)
> Testing BTECH UV-5001 edges ... ok
> test_settings (tests.TestCase_BTECHUV5001)
> Testing BTECH UV-5001 settings ... ok
> test_banks (tests.TestCase_YaesuVX8GE)
> Testing Yaesu VX-8GE banks ... ok
> test_brute_force (tests.TestCase_YaesuVX8GE)
> Testing Yaesu VX-8GE brute force ... ok
> test_clone (tests.TestCase_YaesuVX8GE)
> Testing Yaesu VX-8GE clone ... ok
> test_copy_all (tests.TestCase_YaesuVX8GE)
> Testing Yaesu VX-8GE copy all ... ok
> test_detect (tests.TestCase_YaesuVX8GE)
> Testing Yaesu VX-8GE detect ... ok
> test_edges (tests.TestCase_YaesuVX8GE)
> Testing Yaesu VX-8GE edges ... ok
> test_settings (tests.TestCase_YaesuVX8GE)
> Testing Yaesu VX-8GE settings ... ok
> test_banks (tests.TestCase_RadioddityR2)
> Testing Radioddity R2 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RadioddityR2)
> Testing Radioddity R2 brute force ... ok
> test_clone (tests.TestCase_RadioddityR2)
> Testing Radioddity R2 clone ... ok
> test_copy_all (tests.TestCase_RadioddityR2)
> Testing Radioddity R2 copy all ... ok
> test_detect (tests.TestCase_RadioddityR2)
> Testing Radioddity R2 detect ... ok
> test_edges (tests.TestCase_RadioddityR2)
> Testing Radioddity R2 edges ... ok
> test_settings (tests.TestCase_RadioddityR2)
> Testing Radioddity R2 settings ... ok
> test_banks (tests.TestCase_YaesuFT817)
> Testing Yaesu FT-817 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT817)
> Testing Yaesu FT-817 brute force ... ok
> test_clone (tests.TestCase_YaesuFT817)
> Testing Yaesu FT-817 clone ... ok
> test_copy_all (tests.TestCase_YaesuFT817)
> Testing Yaesu FT-817 copy all ... ok
> test_detect (tests.TestCase_YaesuFT817)
> Testing Yaesu FT-817 detect ... ok
> test_edges (tests.TestCase_YaesuFT817)
> Testing Yaesu FT-817 edges ... ok
> test_settings (tests.TestCase_YaesuFT817)
> Testing Yaesu FT-817 settings ... ok
> test_banks (tests.TestCase_YaesuFT1500M)
> Testing Yaesu FT-1500M banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT1500M)
> Testing Yaesu FT-1500M brute force ... ok
> test_clone (tests.TestCase_YaesuFT1500M)
> Testing Yaesu FT-1500M clone ... ok
> test_copy_all (tests.TestCase_YaesuFT1500M)
> Testing Yaesu FT-1500M copy all ... ok
> test_detect (tests.TestCase_YaesuFT1500M)
> Testing Yaesu FT-1500M detect ... ok
> test_edges (tests.TestCase_YaesuFT1500M)
> Testing Yaesu FT-1500M edges ... ok
> test_settings (tests.TestCase_YaesuFT1500M)
> Testing Yaesu FT-1500M settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_FeidaxinFD288B)
> Testing Feidaxin FD-288B banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_FeidaxinFD288B)
> Testing Feidaxin FD-288B brute force ... ok
> test_clone (tests.TestCase_FeidaxinFD288B)
> Testing Feidaxin FD-288B clone ... ok
> test_copy_all (tests.TestCase_FeidaxinFD288B)
> Testing Feidaxin FD-288B copy all ... ok
> test_detect (tests.TestCase_FeidaxinFD288B)
> Testing Feidaxin FD-288B detect ... ok
> test_edges (tests.TestCase_FeidaxinFD288B)
> Testing Feidaxin FD-288B edges ... ok
> test_settings (tests.TestCase_FeidaxinFD288B)
> Testing Feidaxin FD-288B settings ... ok
> test_banks (tests.TestCase_TYTTHUV88)
> Testing TYT TH-UV88 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_TYTTHUV88)
> Testing TYT TH-UV88 brute force ... ok
> test_clone (tests.TestCase_TYTTHUV88)
> Testing TYT TH-UV88 clone ... ok
> test_copy_all (tests.TestCase_TYTTHUV88)
> Testing TYT TH-UV88 copy all ... ok
> test_detect (tests.TestCase_TYTTHUV88)
> Testing TYT TH-UV88 detect ... ok
> test_edges (tests.TestCase_TYTTHUV88)
> Testing TYT TH-UV88 edges ... ok
> test_settings (tests.TestCase_TYTTHUV88)
> Testing TYT TH-UV88 settings ... ok
> test_banks (tests.TestCase_AlincoDJG7EG)
> Testing Alinco DJ-G7EG banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_AlincoDJG7EG)
> Testing Alinco DJ-G7EG brute force ... ok
> test_clone (tests.TestCase_AlincoDJG7EG)
> Testing Alinco DJ-G7EG clone ... ok
> test_copy_all (tests.TestCase_AlincoDJG7EG)
> Testing Alinco DJ-G7EG copy all ... ok
> test_detect (tests.TestCase_AlincoDJG7EG)
> Testing Alinco DJ-G7EG detect ... ok
> test_edges (tests.TestCase_AlincoDJG7EG)
> Testing Alinco DJ-G7EG edges ... ok
> test_settings (tests.TestCase_AlincoDJG7EG)
> Testing Alinco DJ-G7EG settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_BTECHUV50X2)
> Testing BTECH UV-50X2 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BTECHUV50X2)
> Testing BTECH UV-50X2 brute force ... ok
> test_clone (tests.TestCase_BTECHUV50X2)
> Testing BTECH UV-50X2 clone ... ok
> test_copy_all (tests.TestCase_BTECHUV50X2)
> Testing BTECH UV-50X2 copy all ... ok
> test_detect (tests.TestCase_BTECHUV50X2)
> Testing BTECH UV-50X2 detect ... ok
> test_edges (tests.TestCase_BTECHUV50X2)
> Testing BTECH UV-50X2 edges ... ok
> test_settings (tests.TestCase_BTECHUV50X2)
> Testing BTECH UV-50X2 settings ... ok
> test_banks (tests.TestCase_RadtelT18)
> Testing Radtel T18 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RadtelT18)
> Testing Radtel T18 brute force ... ok
> test_clone (tests.TestCase_RadtelT18)
> Testing Radtel T18 clone ... ok
> test_copy_all (tests.TestCase_RadtelT18)
> Testing Radtel T18 copy all ... ok
> test_detect (tests.TestCase_RadtelT18)
> Testing Radtel T18 detect ... ok
> test_edges (tests.TestCase_RadtelT18)
> Testing Radtel T18 edges ... ok
> test_settings (tests.TestCase_RadtelT18)
> Testing Radtel T18 settings ... ok
> test_banks (tests.TestCase_KenwoodTK8180)
> Testing Kenwood TK-8180 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_KenwoodTK8180)
> Testing Kenwood TK-8180 brute force ... ok
> test_clone (tests.TestCase_KenwoodTK8180)
> Testing Kenwood TK-8180 clone ... ok
> test_copy_all (tests.TestCase_KenwoodTK8180)
> Testing Kenwood TK-8180 copy all ... ok
> test_detect (tests.TestCase_KenwoodTK8180)
> Testing Kenwood TK-8180 detect ... ok
> test_edges (tests.TestCase_KenwoodTK8180)
> Testing Kenwood TK-8180 edges ... ok
> test_settings (tests.TestCase_KenwoodTK8180)
> Testing Kenwood TK-8180 settings ... ok
> test_banks (tests.TestCase_YaesuFT817ND)
> Testing Yaesu FT-817ND banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT817ND)
> Testing Yaesu FT-817ND brute force ... ok
> test_clone (tests.TestCase_YaesuFT817ND)
> Testing Yaesu FT-817ND clone ... ok
> test_copy_all (tests.TestCase_YaesuFT817ND)
> Testing Yaesu FT-817ND copy all ... ok
> test_detect (tests.TestCase_YaesuFT817ND)
> Testing Yaesu FT-817ND detect ... ok
> test_edges (tests.TestCase_YaesuFT817ND)
> Testing Yaesu FT-817ND edges ... ok
> test_settings (tests.TestCase_YaesuFT817ND)
> Testing Yaesu FT-817ND settings ... ok
> test_banks (tests.TestCase_YaesuFT1802M)
> Testing Yaesu FT-1802M banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT1802M)
> Testing Yaesu FT-1802M brute force ... ok
> test_clone (tests.TestCase_YaesuFT1802M)
> Testing Yaesu FT-1802M clone ... ok
> test_copy_all (tests.TestCase_YaesuFT1802M)
> Testing Yaesu FT-1802M copy all ... ok
> test_detect (tests.TestCase_YaesuFT1802M)
> Testing Yaesu FT-1802M detect ... ok
> test_edges (tests.TestCase_YaesuFT1802M)
> Testing Yaesu FT-1802M edges ... ok
> test_settings (tests.TestCase_YaesuFT1802M)
> Testing Yaesu FT-1802M settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_TYTTHUVF1)
> Testing TYT TH-UVF1 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_TYTTHUVF1)
> Testing TYT TH-UVF1 brute force ... ok
> test_clone (tests.TestCase_TYTTHUVF1)
> Testing TYT TH-UVF1 clone ... ok
> test_copy_all (tests.TestCase_TYTTHUVF1)
> Testing TYT TH-UVF1 copy all ... ok
> test_detect (tests.TestCase_TYTTHUVF1)
> Testing TYT TH-UVF1 detect ... ok
> test_edges (tests.TestCase_TYTTHUVF1)
> Testing TYT TH-UVF1 edges ... ok
> test_settings (tests.TestCase_TYTTHUVF1)
> Testing TYT TH-UVF1 settings ... ok
> test_banks (tests.TestCase_IcomIC208H)
> Testing Icom IC-208H banks ... ok
> test_brute_force (tests.TestCase_IcomIC208H)
> Testing Icom IC-208H brute force ... ok
> test_clone (tests.TestCase_IcomIC208H)
> Testing Icom IC-208H clone ... ok
> test_copy_all (tests.TestCase_IcomIC208H)
> Testing Icom IC-208H copy all ... ok
> test_detect (tests.TestCase_IcomIC208H)
> Testing Icom IC-208H detect ... ok
> test_edges (tests.TestCase_IcomIC208H)
> Testing Icom IC-208H edges ... ok
> test_settings (tests.TestCase_IcomIC208H)
> Testing Icom IC-208H settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_AlincoDJ175)
> Testing Alinco DJ175 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_AlincoDJ175)
> Testing Alinco DJ175 brute force ... ok
> test_clone (tests.TestCase_AlincoDJ175)
> Testing Alinco DJ175 clone ... ok
> test_copy_all (tests.TestCase_AlincoDJ175)
> Testing Alinco DJ175 copy all ... ok
> test_detect (tests.TestCase_AlincoDJ175)
> Testing Alinco DJ175 detect ... ok
> test_edges (tests.TestCase_AlincoDJ175)
> Testing Alinco DJ175 edges ... ok
> test_settings (tests.TestCase_AlincoDJ175)
> Testing Alinco DJ175 settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_BTECHUV50X3)
> Testing BTECH UV-50X3 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BTECHUV50X3)
> Testing BTECH UV-50X3 brute force ... ok
> test_clone (tests.TestCase_BTECHUV50X3)
> Testing BTECH UV-50X3 clone ... ok
> test_copy_all (tests.TestCase_BTECHUV50X3)
> Testing BTECH UV-50X3 copy all ... ok
> test_detect (tests.TestCase_BTECHUV50X3)
> Testing BTECH UV-50X3 detect ... ok
> test_edges (tests.TestCase_BTECHUV50X3)
> Testing BTECH UV-50X3 edges ... ok
> test_settings (tests.TestCase_BTECHUV50X3)
> Testing BTECH UV-50X3 settings ... ok
> test_banks (tests.TestCase_IcomID51)
> Testing Icom ID-51 banks ... ok
> test_brute_force (tests.TestCase_IcomID51)
> Testing Icom ID-51 brute force ... ok
> test_clone (tests.TestCase_IcomID51)
> Testing Icom ID-51 clone ... ok
> test_copy_all (tests.TestCase_IcomID51)
> Testing Icom ID-51 copy all ... ok
> test_detect (tests.TestCase_IcomID51)
> Testing Icom ID-51 detect ... ok
> test_edges (tests.TestCase_IcomID51)
> Testing Icom ID-51 edges ... ok
> test_settings (tests.TestCase_IcomID51)
> Testing Icom ID-51 settings ... ok
> test_banks (tests.TestCase_YaesuVX8R)
> Testing Yaesu VX-8R banks ... ok
> test_brute_force (tests.TestCase_YaesuVX8R)
> Testing Yaesu VX-8R brute force ... ok
> test_clone (tests.TestCase_YaesuVX8R)
> Testing Yaesu VX-8R clone ... ok
> test_copy_all (tests.TestCase_YaesuVX8R)
> Testing Yaesu VX-8R copy all ... ok
> test_detect (tests.TestCase_YaesuVX8R)
> Testing Yaesu VX-8R detect ... ok
> test_edges (tests.TestCase_YaesuVX8R)
> Testing Yaesu VX-8R edges ... ok
> test_settings (tests.TestCase_YaesuVX8R)
> Testing Yaesu VX-8R settings ... ok
> test_banks (tests.TestCase_RetevisRT1)
> Testing Retevis RT1 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RetevisRT1)
> Testing Retevis RT1 brute force ... ok
> test_clone (tests.TestCase_RetevisRT1)
> Testing Retevis RT1 clone ... ok
> test_copy_all (tests.TestCase_RetevisRT1)
> Testing Retevis RT1 copy all ... ok
> test_detect (tests.TestCase_RetevisRT1)
> Testing Retevis RT1 detect ... ok
> test_edges (tests.TestCase_RetevisRT1)
> Testing Retevis RT1 edges ... ok
> test_settings (tests.TestCase_RetevisRT1)
> Testing Retevis RT1 settings ... ok
> test_banks (tests.TestCase_YaesuFT817NDUS)
> Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT817NDUS)
> Testing Yaesu FT-817ND (US) brute force ... ok
> test_clone (tests.TestCase_YaesuFT817NDUS)
> Testing Yaesu FT-817ND (US) clone ... ok
> test_copy_all (tests.TestCase_YaesuFT817NDUS)
> Testing Yaesu FT-817ND (US) copy all ... ok
> test_detect (tests.TestCase_YaesuFT817NDUS)
> Testing Yaesu FT-817ND (US) detect ... ok
> test_edges (tests.TestCase_YaesuFT817NDUS)
> Testing Yaesu FT-817ND (US) edges ... ok
> test_settings (tests.TestCase_YaesuFT817NDUS)
> Testing Yaesu FT-817ND (US) settings ... ok
> test_banks (tests.TestCase_TYTTH9000144)
> Testing TYT TH9000_144 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_TYTTH9000144)
> Testing TYT TH9000_144 brute force ... ok
> test_clone (tests.TestCase_TYTTH9000144)
> Testing TYT TH9000_144 clone ... ok
> test_copy_all (tests.TestCase_TYTTH9000144)
> Testing TYT TH9000_144 copy all ... ok
> test_detect (tests.TestCase_TYTTH9000144)
> Testing TYT TH9000_144 detect ... ok
> test_edges (tests.TestCase_TYTTH9000144)
> Testing TYT TH9000_144 edges ... ok
> test_settings (tests.TestCase_TYTTH9000144)
> Testing TYT TH9000_144 settings ... ok
> test_banks (tests.TestCase_AlincoDJ596)
> Testing Alinco DJ596 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_AlincoDJ596)
> Testing Alinco DJ596 brute force ... ok
> test_clone (tests.TestCase_AlincoDJ596)
> Testing Alinco DJ596 clone ... ok
> test_copy_all (tests.TestCase_AlincoDJ596)
> Testing Alinco DJ596 copy all ... ok
> test_detect (tests.TestCase_AlincoDJ596)
> Testing Alinco DJ596 detect ... ok
> test_edges (tests.TestCase_AlincoDJ596)
> Testing Alinco DJ596 edges ... ok
> test_settings (tests.TestCase_AlincoDJ596)
> Testing Alinco DJ596 settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_BTECHUV5X3)
> Testing BTECH UV-5X3 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BTECHUV5X3)
> Testing BTECH UV-5X3 brute force ... ok
> test_clone (tests.TestCase_BTECHUV5X3)
> Testing BTECH UV-5X3 clone ... ok
> test_copy_all (tests.TestCase_BTECHUV5X3)
> Testing BTECH UV-5X3 copy all ... ok
> test_detect (tests.TestCase_BTECHUV5X3)
> Testing BTECH UV-5X3 detect ... ok
> test_edges (tests.TestCase_BTECHUV5X3)
> Testing BTECH UV-5X3 edges ... ok
> test_settings (tests.TestCase_BTECHUV5X3)
> Testing BTECH UV-5X3 settings ... ok
> test_banks (tests.TestCase_IcomIC2100H)
> Testing Icom IC-2100H banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_IcomIC2100H)
> Testing Icom IC-2100H brute force ... ok
> test_clone (tests.TestCase_IcomIC2100H)
> Testing Icom IC-2100H clone ... ok
> test_copy_all (tests.TestCase_IcomIC2100H)
> Testing Icom IC-2100H copy all ... ok
> test_detect (tests.TestCase_IcomIC2100H)
> Testing Icom IC-2100H detect ... ok
> test_edges (tests.TestCase_IcomIC2100H)
> Testing Icom IC-2100H edges ... ok
> test_settings (tests.TestCase_IcomIC2100H)
> Testing Icom IC-2100H settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_KenwoodTMD710GCloneMode)
> Testing Kenwood TM-D710G_CloneMode banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_KenwoodTMD710GCloneMode)
> Testing Kenwood TM-D710G_CloneMode brute force ... ok
> test_clone (tests.TestCase_KenwoodTMD710GCloneMode)
> Testing Kenwood TM-D710G_CloneMode clone ... ok
> test_copy_all (tests.TestCase_KenwoodTMD710GCloneMode)
> Testing Kenwood TM-D710G_CloneMode copy all ... ok
> test_detect (tests.TestCase_KenwoodTMD710GCloneMode)
> Testing Kenwood TM-D710G_CloneMode detect ... ok
> test_edges (tests.TestCase_KenwoodTMD710GCloneMode)
> Testing Kenwood TM-D710G_CloneMode edges ... ok
> test_settings (tests.TestCase_KenwoodTMD710GCloneMode)
> Testing Kenwood TM-D710G_CloneMode settings ... ok
> test_banks (tests.TestCase_RetevisRT21)
> Testing Retevis RT21 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RetevisRT21)
> Testing Retevis RT21 brute force ... ok
> test_clone (tests.TestCase_RetevisRT21)
> Testing Retevis RT21 clone ... ok
> test_copy_all (tests.TestCase_RetevisRT21)
> Testing Retevis RT21 copy all ... ok
> test_detect (tests.TestCase_RetevisRT21)
> Testing Retevis RT21 detect ... ok
> test_edges (tests.TestCase_RetevisRT21)
> Testing Retevis RT21 edges ... ok
> test_settings (tests.TestCase_RetevisRT21)
> Testing Retevis RT21 settings ... ok
> test_banks (tests.TestCase_VertexStandardVXA700)
> Testing Vertex Standard VXA-700 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_VertexStandardVXA700)
> Testing Vertex Standard VXA-700 brute force ... ok
> test_clone (tests.TestCase_VertexStandardVXA700)
> Testing Vertex Standard VXA-700 clone ... ok
> test_copy_all (tests.TestCase_VertexStandardVXA700)
> Testing Vertex Standard VXA-700 copy all ... ok
> test_detect (tests.TestCase_VertexStandardVXA700)
> Testing Vertex Standard VXA-700 detect ... ok
> test_edges (tests.TestCase_VertexStandardVXA700)
> Testing Vertex Standard VXA-700 edges ... ok
> test_settings (tests.TestCase_VertexStandardVXA700)
> Testing Vertex Standard VXA-700 settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_YaesuFT818)
> Testing Yaesu FT-818 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT818)
> Testing Yaesu FT-818 brute force ... ok
> test_clone (tests.TestCase_YaesuFT818)
> Testing Yaesu FT-818 clone ... ok
> test_copy_all (tests.TestCase_YaesuFT818)
> Testing Yaesu FT-818 copy all ... ok
> test_detect (tests.TestCase_YaesuFT818)
> Testing Yaesu FT-818 detect ... ok
> test_edges (tests.TestCase_YaesuFT818)
> Testing Yaesu FT-818 edges ... ok
> test_settings (tests.TestCase_YaesuFT818)
> Testing Yaesu FT-818 settings ... ok
> test_banks (tests.TestCase_IcomID51Plus)
> Testing Icom ID-51 Plus banks ... ok
> test_brute_force (tests.TestCase_IcomID51Plus)
> Testing Icom ID-51 Plus brute force ... ok
> test_clone (tests.TestCase_IcomID51Plus)
> Testing Icom ID-51 Plus clone ... ok
> test_copy_all (tests.TestCase_IcomID51Plus)
> Testing Icom ID-51 Plus copy all ... ok
> test_detect (tests.TestCase_IcomID51Plus)
> Testing Icom ID-51 Plus detect ... ok
> test_edges (tests.TestCase_IcomID51Plus)
> Testing Icom ID-51 Plus edges ... ok
> test_settings (tests.TestCase_IcomID51Plus)
> Testing Icom ID-51 Plus settings ... ok
> test_banks (tests.TestCase_BaofengBF888)
> Testing Baofeng BF-888 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BaofengBF888)
> Testing Baofeng BF-888 brute force ... ok
> test_clone (tests.TestCase_BaofengBF888)
> Testing Baofeng BF-888 clone ... ok
> test_copy_all (tests.TestCase_BaofengBF888)
> Testing Baofeng BF-888 copy all ... ok
> test_detect (tests.TestCase_BaofengBF888)
> Testing Baofeng BF-888 detect ... ok
> test_edges (tests.TestCase_BaofengBF888)
> Testing Baofeng BF-888 edges ... ok
> test_settings (tests.TestCase_BaofengBF888)
> Testing Baofeng BF-888 settings ... ok
> test_banks (tests.TestCase_IcomIC2200H)
> Testing Icom IC-2200H banks ... ok
> test_brute_force (tests.TestCase_IcomIC2200H)
> Testing Icom IC-2200H brute force ... ok
> test_clone (tests.TestCase_IcomIC2200H)
> Testing Icom IC-2200H clone ... ok
> test_copy_all (tests.TestCase_IcomIC2200H)
> Testing Icom IC-2200H copy all ... ok
> test_detect (tests.TestCase_IcomIC2200H)
> Testing Icom IC-2200H detect ... ok
> test_edges (tests.TestCase_IcomIC2200H)
> Testing Icom IC-2200H edges ... ok
> test_settings (tests.TestCase_IcomIC2200H)
> Testing Icom IC-2200H settings ... ok
> test_banks (tests.TestCase_YaesuFT1D)
> Testing Yaesu FT-1D banks ... ok
> test_brute_force (tests.TestCase_YaesuFT1D)
> Testing Yaesu FT-1D brute force ... ok
> test_clone (tests.TestCase_YaesuFT1D)
> Testing Yaesu FT-1D clone ... ok
> test_copy_all (tests.TestCase_YaesuFT1D)
> Testing Yaesu FT-1D copy all ... ok
> test_detect (tests.TestCase_YaesuFT1D)
> Testing Yaesu FT-1D detect ... ok
> test_edges (tests.TestCase_YaesuFT1D)
> Testing Yaesu FT-1D edges ... ok
> test_settings (tests.TestCase_YaesuFT1D)
> Testing Yaesu FT-1D settings ... ok
> test_banks (tests.TestCase_KenwoodTMD710CloneMode)
> Testing Kenwood TM-D710_CloneMode banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_KenwoodTMD710CloneMode)
> Testing Kenwood TM-D710_CloneMode brute force ... ok
> test_clone (tests.TestCase_KenwoodTMD710CloneMode)
> Testing Kenwood TM-D710_CloneMode clone ... ok
> test_copy_all (tests.TestCase_KenwoodTMD710CloneMode)
> Testing Kenwood TM-D710_CloneMode copy all ... ok
> test_detect (tests.TestCase_KenwoodTMD710CloneMode)
> Testing Kenwood TM-D710_CloneMode detect ... ok
> test_edges (tests.TestCase_KenwoodTMD710CloneMode)
> Testing Kenwood TM-D710_CloneMode edges ... ok
> test_settings (tests.TestCase_KenwoodTMD710CloneMode)
> Testing Kenwood TM-D710_CloneMode settings ... ok
> test_banks (tests.TestCase_RetevisRT22)
> Testing Retevis RT22 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RetevisRT22)
> Testing Retevis RT22 brute force ... ok
> test_clone (tests.TestCase_RetevisRT22)
> Testing Retevis RT22 clone ... ok
> test_copy_all (tests.TestCase_RetevisRT22)
> Testing Retevis RT22 copy all ... ok
> test_detect (tests.TestCase_RetevisRT22)
> Testing Retevis RT22 detect ... ok
> test_edges (tests.TestCase_RetevisRT22)
> Testing Retevis RT22 edges ... ok
> test_settings (tests.TestCase_RetevisRT22)
> Testing Retevis RT22 settings ... ok
> test_banks (tests.TestCase_WACCOMMINI8900)
> Testing WACCOM MINI-8900 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_WACCOMMINI8900)
> Testing WACCOM MINI-8900 brute force ... ok
> test_clone (tests.TestCase_WACCOMMINI8900)
> Testing WACCOM MINI-8900 clone ... ok
> test_copy_all (tests.TestCase_WACCOMMINI8900)
> Testing WACCOM MINI-8900 copy all ... ok
> test_detect (tests.TestCase_WACCOMMINI8900)
> Testing WACCOM MINI-8900 detect ... ok
> test_edges (tests.TestCase_WACCOMMINI8900)
> Testing WACCOM MINI-8900 edges ... ok
> test_settings (tests.TestCase_WACCOMMINI8900)
> Testing WACCOM MINI-8900 settings ... ok
> test_banks (tests.TestCase_BaofengBFA58S)
> Testing Baofeng BF-A58S banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_BaofengBFA58S)
> Testing Baofeng BF-A58S brute force ... ok
> test_clone (tests.TestCase_BaofengBFA58S)
> Testing Baofeng BF-A58S clone ... ok
> test_copy_all (tests.TestCase_BaofengBFA58S)
> Testing Baofeng BF-A58S copy all ... ok
> test_detect (tests.TestCase_BaofengBFA58S)
> Testing Baofeng BF-A58S detect ... ok
> test_edges (tests.TestCase_BaofengBFA58S)
> Testing Baofeng BF-A58S edges ... ok
> test_settings (tests.TestCase_BaofengBFA58S)
> Testing Baofeng BF-A58S settings ... ok
> test_banks (tests.TestCase_YaesuFT857897)
> Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT857897)
> Testing Yaesu FT-857/897 brute force ... ok
> test_clone (tests.TestCase_YaesuFT857897)
> Testing Yaesu FT-857/897 clone ... ok
> test_copy_all (tests.TestCase_YaesuFT857897)
> Testing Yaesu FT-857/897 copy all ... ok
> test_detect (tests.TestCase_YaesuFT857897)
> Testing Yaesu FT-857/897 detect ... ok
> test_edges (tests.TestCase_YaesuFT857897)
> Testing Yaesu FT-857/897 edges ... ok
> test_settings (tests.TestCase_YaesuFT857897)
> Testing Yaesu FT-857/897 settings ... ok
> test_banks (tests.TestCase_IcomIC2300H)
> Testing Icom IC-2300H banks ... ok
> test_brute_force (tests.TestCase_IcomIC2300H)
> Testing Icom IC-2300H brute force ... ok
> test_clone (tests.TestCase_IcomIC2300H)
> Testing Icom IC-2300H clone ... ok
> test_copy_all (tests.TestCase_IcomIC2300H)
> Testing Icom IC-2300H copy all ... ok
> test_detect (tests.TestCase_IcomIC2300H)
> Testing Icom IC-2300H detect ... ok
> test_edges (tests.TestCase_IcomIC2300H)
> Testing Icom IC-2300H edges ... ok
> test_settings (tests.TestCase_IcomIC2300H)
> Testing Icom IC-2300H settings ... ok
> test_banks (tests.TestCase_IcomID800H)
> Testing Icom ID-800H banks ... ok
> test_brute_force (tests.TestCase_IcomID800H)
> Testing Icom ID-800H brute force ... ok
> test_clone (tests.TestCase_IcomID800H)
> Testing Icom ID-800H clone ... ok
> test_copy_all (tests.TestCase_IcomID800H)
> Testing Icom ID-800H copy all ... ok
> test_detect (tests.TestCase_IcomID800H)
> Testing Icom ID-800H detect ... ok
> test_edges (tests.TestCase_IcomID800H)
> Testing Icom ID-800H edges ... ok
> test_settings (tests.TestCase_IcomID800H)
> Testing Icom ID-800H settings ... ok
> test_banks (tests.TestCase_KenwoodTS480CloneMode)
> Testing Kenwood TS-480_CloneMode banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_KenwoodTS480CloneMode)
> Testing Kenwood TS-480_CloneMode brute force ... ok
> test_clone (tests.TestCase_KenwoodTS480CloneMode)
> Testing Kenwood TS-480_CloneMode clone ... ok
> test_copy_all (tests.TestCase_KenwoodTS480CloneMode)
> Testing Kenwood TS-480_CloneMode copy all ... ok
> test_detect (tests.TestCase_KenwoodTS480CloneMode)
> Testing Kenwood TS-480_CloneMode detect ... ok
> test_edges (tests.TestCase_KenwoodTS480CloneMode)
> Testing Kenwood TS-480_CloneMode edges ... ok
> test_settings (tests.TestCase_KenwoodTS480CloneMode)
> Testing Kenwood TS-480_CloneMode settings ... ok
> test_banks (tests.TestCase_YaesuFT25R)
> Testing Yaesu FT-25R banks ... ok
> test_brute_force (tests.TestCase_YaesuFT25R)
> Testing Yaesu FT-25R brute force ... ok
> test_clone (tests.TestCase_YaesuFT25R)
> Testing Yaesu FT-25R clone ... ok
> test_copy_all (tests.TestCase_YaesuFT25R)
> Testing Yaesu FT-25R copy all ... ok
> test_detect (tests.TestCase_YaesuFT25R)
> Testing Yaesu FT-25R detect ... ok
> test_edges (tests.TestCase_YaesuFT25R)
> Testing Yaesu FT-25R edges ... ok
> test_settings (tests.TestCase_YaesuFT25R)
> Testing Yaesu FT-25R settings ... ok
> test_banks (tests.TestCase_WouxunKG816)
> Testing Wouxun KG-816 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_WouxunKG816)
> Testing Wouxun KG-816 brute force ... ok
> test_clone (tests.TestCase_WouxunKG816)
> Testing Wouxun KG-816 clone ... ok
> test_copy_all (tests.TestCase_WouxunKG816)
> Testing Wouxun KG-816 copy all ... ok
> test_detect (tests.TestCase_WouxunKG816)
> Testing Wouxun KG-816 detect ... ok
> test_edges (tests.TestCase_WouxunKG816)
> Testing Wouxun KG-816 edges ... ok
> test_settings (tests.TestCase_WouxunKG816)
> Testing Wouxun KG-816 settings ... ok
> test_banks (tests.TestCase_RetevisRT22FRS)
> Testing Retevis RT22FRS banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RetevisRT22FRS)
> Testing Retevis RT22FRS brute force ... ok
> test_clone (tests.TestCase_RetevisRT22FRS)
> Testing Retevis RT22FRS clone ... ok
> test_copy_all (tests.TestCase_RetevisRT22FRS)
> Testing Retevis RT22FRS copy all ... ok
> test_detect (tests.TestCase_RetevisRT22FRS)
> Testing Retevis RT22FRS detect ... ok
> test_edges (tests.TestCase_RetevisRT22FRS)
> Testing Retevis RT22FRS edges ... ok
> test_settings (tests.TestCase_RetevisRT22FRS)
> Testing Retevis RT22FRS settings ... ok
> test_banks (tests.TestCase_IcomIC2720H)
> Testing Icom IC-2720H banks ... ok
> test_brute_force (tests.TestCase_IcomIC2720H)
> Testing Icom IC-2720H brute force ... ok
> test_clone (tests.TestCase_IcomIC2720H)
> Testing Icom IC-2720H clone ... ok
> test_copy_all (tests.TestCase_IcomIC2720H)
> Testing Icom IC-2720H copy all ... ok
> test_detect (tests.TestCase_IcomIC2720H)
> Testing Icom IC-2720H detect ... ok
> test_edges (tests.TestCase_IcomIC2720H)
> Testing Icom IC-2720H edges ... ok
> test_settings (tests.TestCase_IcomIC2720H)
> Testing Icom IC-2720H settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_YaesuFT857897US)
> Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT857897US)
> Testing Yaesu FT-857/897 (US) brute force ... ok
> test_clone (tests.TestCase_YaesuFT857897US)
> Testing Yaesu FT-857/897 (US) clone ... ok
> test_copy_all (tests.TestCase_YaesuFT857897US)
> Testing Yaesu FT-857/897 (US) copy all ... ok
> test_detect (tests.TestCase_YaesuFT857897US)
> Testing Yaesu FT-857/897 (US) detect ... ok
> test_edges (tests.TestCase_YaesuFT857897US)
> Testing Yaesu FT-857/897 (US) edges ... ok
> test_settings (tests.TestCase_YaesuFT857897US)
> Testing Yaesu FT-857/897 (US) settings ... ok
> test_banks (tests.TestCase_KenwoodTS590SGCloneMode)
> Testing Kenwood TS-590SG_CloneMode banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_KenwoodTS590SGCloneMode)
> Testing Kenwood TS-590SG_CloneMode brute force ... ok
> test_clone (tests.TestCase_KenwoodTS590SGCloneMode)
> Testing Kenwood TS-590SG_CloneMode clone ... ok
> test_copy_all (tests.TestCase_KenwoodTS590SGCloneMode)
> Testing Kenwood TS-590SG_CloneMode copy all ... ok
> test_detect (tests.TestCase_KenwoodTS590SGCloneMode)
> Testing Kenwood TS-590SG_CloneMode detect ... ok
> test_edges (tests.TestCase_KenwoodTS590SGCloneMode)
> Testing Kenwood TS-590SG_CloneMode edges ... ok
> test_settings (tests.TestCase_KenwoodTS590SGCloneMode)
> Testing Kenwood TS-590SG_CloneMode settings ... ok
> test_banks (tests.TestCase_RetevisRT23)
> Testing Retevis RT23 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RetevisRT23)
> Testing Retevis RT23 brute force ... ok
> test_clone (tests.TestCase_RetevisRT23)
> Testing Retevis RT23 clone ... ok
> test_copy_all (tests.TestCase_RetevisRT23)
> Testing Retevis RT23 copy all ... ok
> test_detect (tests.TestCase_RetevisRT23)
> Testing Retevis RT23 detect ... ok
> test_edges (tests.TestCase_RetevisRT23)
> Testing Retevis RT23 edges ... ok
> test_settings (tests.TestCase_RetevisRT23)
> Testing Retevis RT23 settings ... ok
> test_banks (tests.TestCase_WouxunKG818)
> Testing Wouxun KG-818 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_WouxunKG818)
> Testing Wouxun KG-818 brute force ... ok
> test_clone (tests.TestCase_WouxunKG818)
> Testing Wouxun KG-818 clone ... ok
> test_copy_all (tests.TestCase_WouxunKG818)
> Testing Wouxun KG-818 copy all ... ok
> test_detect (tests.TestCase_WouxunKG818)
> Testing Wouxun KG-818 detect ... ok
> test_edges (tests.TestCase_WouxunKG818)
> Testing Wouxun KG-818 edges ... ok
> test_settings (tests.TestCase_WouxunKG818)
> Testing Wouxun KG-818 settings ... ok
> test_banks (tests.TestCase_IcomID880H)
> Testing Icom ID-880H banks ... ok
> test_brute_force (tests.TestCase_IcomID880H)
> Testing Icom ID-880H brute force ... ok
> test_clone (tests.TestCase_IcomID880H)
> Testing Icom ID-880H clone ... ok
> test_copy_all (tests.TestCase_IcomID880H)
> Testing Icom ID-880H copy all ... ok
> test_detect (tests.TestCase_IcomID880H)
> Testing Icom ID-880H detect ... ok
> test_edges (tests.TestCase_IcomID880H)
> Testing Icom ID-880H edges ... ok
> test_settings (tests.TestCase_IcomID880H)
> Testing Icom ID-880H settings ... ok
> test_banks (tests.TestCase_YaesuFT2800M)
> Testing Yaesu FT-2800M banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT2800M)
> Testing Yaesu FT-2800M brute force ... ok
> test_clone (tests.TestCase_YaesuFT2800M)
> Testing Yaesu FT-2800M clone ... ok
> test_copy_all (tests.TestCase_YaesuFT2800M)
> Testing Yaesu FT-2800M copy all ... ok
> test_detect (tests.TestCase_YaesuFT2800M)
> Testing Yaesu FT-2800M detect ... ok
> test_edges (tests.TestCase_YaesuFT2800M)
> Testing Yaesu FT-2800M edges ... ok
> test_settings (tests.TestCase_YaesuFT2800M)
> Testing Yaesu FT-2800M settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_LUITONLT725UV)
> Testing LUITON LT-725UV banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_LUITONLT725UV)
> Testing LUITON LT-725UV brute force ... ok
> test_clone (tests.TestCase_LUITONLT725UV)
> Testing LUITON LT-725UV clone ... ok
> test_copy_all (tests.TestCase_LUITONLT725UV)
> Testing LUITON LT-725UV copy all ... ok
> test_detect (tests.TestCase_LUITONLT725UV)
> Testing LUITON LT-725UV detect ... ok
> test_edges (tests.TestCase_LUITONLT725UV)
> Testing LUITON LT-725UV edges ... ok
> test_settings (tests.TestCase_LUITONLT725UV)
> Testing LUITON LT-725UV settings ... ok
> test_banks (tests.TestCase_YaesuFT8800)
> Testing Yaesu FT-8800 banks ... ok
> test_brute_force (tests.TestCase_YaesuFT8800)
> Testing Yaesu FT-8800 brute force ... ok
> test_clone (tests.TestCase_YaesuFT8800)
> Testing Yaesu FT-8800 clone ... ok
> test_copy_all (tests.TestCase_YaesuFT8800)
> Testing Yaesu FT-8800 copy all ... ok
> test_detect (tests.TestCase_YaesuFT8800)
> Testing Yaesu FT-8800 detect ... ok
> test_edges (tests.TestCase_YaesuFT8800)
> Testing Yaesu FT-8800 edges ... ok
> test_settings (tests.TestCase_YaesuFT8800)
> Testing Yaesu FT-8800 settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_RetevisRT26)
> Testing Retevis RT26 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RetevisRT26)
> Testing Retevis RT26 brute force ... ok
> test_clone (tests.TestCase_RetevisRT26)
> Testing Retevis RT26 clone ... ok
> test_copy_all (tests.TestCase_RetevisRT26)
> Testing Retevis RT26 copy all ... ok
> test_detect (tests.TestCase_RetevisRT26)
> Testing Retevis RT26 detect ... ok
> test_edges (tests.TestCase_RetevisRT26)
> Testing Retevis RT26 edges ... ok
> test_settings (tests.TestCase_RetevisRT26)
> Testing Retevis RT26 settings ... ok
> test_banks (tests.TestCase_IcomIC2730A)
> Testing Icom IC-2730A banks ... ok
> test_brute_force (tests.TestCase_IcomIC2730A)
> Testing Icom IC-2730A brute force ... ok
> test_clone (tests.TestCase_IcomIC2730A)
> Testing Icom IC-2730A clone ... ok
> test_copy_all (tests.TestCase_IcomIC2730A)
> Testing Icom IC-2730A copy all ... ok
> test_detect (tests.TestCase_IcomIC2730A)
> Testing Icom IC-2730A detect ... ok
> test_edges (tests.TestCase_IcomIC2730A)
> Testing Icom IC-2730A edges ... ok
> test_settings (tests.TestCase_IcomIC2730A)
> Testing Icom IC-2730A settings ... ok
> test_banks (tests.TestCase_WouxunKGUV6)
> Testing Wouxun KG-UV6 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_WouxunKGUV6)
> Testing Wouxun KG-UV6 brute force ... ok
> test_clone (tests.TestCase_WouxunKGUV6)
> Testing Wouxun KG-UV6 clone ... ok
> test_copy_all (tests.TestCase_WouxunKGUV6)
> Testing Wouxun KG-UV6 copy all ... ok
> test_detect (tests.TestCase_WouxunKGUV6)
> Testing Wouxun KG-UV6 detect ... ok
> test_edges (tests.TestCase_WouxunKGUV6)
> Testing Wouxun KG-UV6 edges ... ok
> test_settings (tests.TestCase_WouxunKGUV6)
> Testing Wouxun KG-UV6 settings ... ok
> test_banks (tests.TestCase_JetstreamJT220M)
> Testing Jetstream JT220M banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_JetstreamJT220M)
> Testing Jetstream JT220M brute force ... ok
> test_clone (tests.TestCase_JetstreamJT220M)
> Testing Jetstream JT220M clone ... ok
> test_copy_all (tests.TestCase_JetstreamJT220M)
> Testing Jetstream JT220M copy all ... ok
> test_detect (tests.TestCase_JetstreamJT220M)
> Testing Jetstream JT220M detect ... ok
> test_edges (tests.TestCase_JetstreamJT220M)
> Testing Jetstream JT220M edges ... ok
> test_settings (tests.TestCase_JetstreamJT220M)
> Testing Jetstream JT220M settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_YaesuFT2900R1900R)
> Testing Yaesu FT-2900R/1900R banks ... ok
> test_brute_force (tests.TestCase_YaesuFT2900R1900R)
> Testing Yaesu FT-2900R/1900R brute force ... ok
> test_clone (tests.TestCase_YaesuFT2900R1900R)
> Testing Yaesu FT-2900R/1900R clone ... ok
> test_copy_all (tests.TestCase_YaesuFT2900R1900R)
> Testing Yaesu FT-2900R/1900R copy all ... ok
> test_detect (tests.TestCase_YaesuFT2900R1900R)
> Testing Yaesu FT-2900R/1900R detect ... ok
> test_edges (tests.TestCase_YaesuFT2900R1900R)
> Testing Yaesu FT-2900R/1900R edges ... ok
> test_settings (tests.TestCase_YaesuFT2900R1900R)
> Testing Yaesu FT-2900R/1900R settings ... ok
> test_banks (tests.TestCase_LeixenVV898)
> Testing Leixen VV-898 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_LeixenVV898)
> Testing Leixen VV-898 brute force ... ok
> test_clone (tests.TestCase_LeixenVV898)
> Testing Leixen VV-898 clone ... ok
> test_copy_all (tests.TestCase_LeixenVV898)
> Testing Leixen VV-898 copy all ... ok
> test_detect (tests.TestCase_LeixenVV898)
> Testing Leixen VV-898 detect ... ok
> test_edges (tests.TestCase_LeixenVV898)
> Testing Leixen VV-898 edges ... ok
> test_settings (tests.TestCase_LeixenVV898)
> Testing Leixen VV-898 settings ... ok
> test_banks (tests.TestCase_YaesuFT8900)
> Testing Yaesu FT-8900 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT8900)
> Testing Yaesu FT-8900 brute force ... ok
> test_clone (tests.TestCase_YaesuFT8900)
> Testing Yaesu FT-8900 clone ... ok
> test_copy_all (tests.TestCase_YaesuFT8900)
> Testing Yaesu FT-8900 copy all ... ok
> test_detect (tests.TestCase_YaesuFT8900)
> Testing Yaesu FT-8900 detect ... ok
> test_edges (tests.TestCase_YaesuFT8900)
> Testing Yaesu FT-8900 edges ... ok
> test_settings (tests.TestCase_YaesuFT8900)
> Testing Yaesu FT-8900 settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_RetevisRT622)
> Testing Retevis RT622 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RetevisRT622)
> Testing Retevis RT622 brute force ... ok
> test_clone (tests.TestCase_RetevisRT622)
> Testing Retevis RT622 clone ... ok
> test_copy_all (tests.TestCase_RetevisRT622)
> Testing Retevis RT622 copy all ... ok
> test_detect (tests.TestCase_RetevisRT622)
> Testing Retevis RT622 detect ... ok
> test_edges (tests.TestCase_RetevisRT622)
> Testing Retevis RT622 edges ... ok
> test_settings (tests.TestCase_RetevisRT622)
> Testing Retevis RT622 settings ... ok
> test_banks (tests.TestCase_WouxunKGUV8D)
> Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_WouxunKGUV8D)
> Testing Wouxun KG-UV8D brute force ... ok
> test_clone (tests.TestCase_WouxunKGUV8D)
> Testing Wouxun KG-UV8D clone ... ok
> test_copy_all (tests.TestCase_WouxunKGUV8D)
> Testing Wouxun KG-UV8D copy all ... ok
> test_detect (tests.TestCase_WouxunKGUV8D)
> Testing Wouxun KG-UV8D detect ... ok
> test_edges (tests.TestCase_WouxunKGUV8D)
> Testing Wouxun KG-UV8D edges ... ok
> test_settings (tests.TestCase_WouxunKGUV8D)
> Testing Wouxun KG-UV8D settings ... ok
> test_banks (tests.TestCase_LeixenVV898S)
> Testing Leixen VV-898S banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_LeixenVV898S)
> Testing Leixen VV-898S brute force ... ok
> test_clone (tests.TestCase_LeixenVV898S)
> Testing Leixen VV-898S clone ... ok
> test_copy_all (tests.TestCase_LeixenVV898S)
> Testing Leixen VV-898S copy all ... ok
> test_detect (tests.TestCase_LeixenVV898S)
> Testing Leixen VV-898S detect ... ok
> test_edges (tests.TestCase_LeixenVV898S)
> Testing Leixen VV-898S edges ... ok
> test_settings (tests.TestCase_LeixenVV898S)
> Testing Leixen VV-898S settings ... ok
> test_banks (tests.TestCase_JetstreamJT270M)
> Testing Jetstream JT270M banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_JetstreamJT270M)
> Testing Jetstream JT270M brute force ... ok
> test_clone (tests.TestCase_JetstreamJT270M)
> Testing Jetstream JT270M clone ... ok
> test_copy_all (tests.TestCase_JetstreamJT270M)
> Testing Jetstream JT270M copy all ... ok
> test_detect (tests.TestCase_JetstreamJT270M)
> Testing Jetstream JT270M detect ... ok
> test_edges (tests.TestCase_JetstreamJT270M)
> Testing Jetstream JT270M edges ... ok
> test_settings (tests.TestCase_JetstreamJT270M)
> Testing Jetstream JT270M settings ... ok
> test_banks (tests.TestCase_RetevisRT95)
> Testing Retevis RT95 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_RetevisRT95)
> Testing Retevis RT95 brute force ... ok
> test_clone (tests.TestCase_RetevisRT95)
> Testing Retevis RT95 clone ... ok
> test_copy_all (tests.TestCase_RetevisRT95)
> Testing Retevis RT95 copy all ... ok
> test_detect (tests.TestCase_RetevisRT95)
> Testing Retevis RT95 detect ... ok
> test_edges (tests.TestCase_RetevisRT95)
> Testing Retevis RT95 edges ... ok
> test_settings (tests.TestCase_RetevisRT95)
> Testing Retevis RT95 settings ... ok
> test_banks (tests.TestCase_YaesuFT450D)
> Testing Yaesu FT-450D banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT450D)
> Testing Yaesu FT-450D brute force ... ok
> test_clone (tests.TestCase_YaesuFT450D)
> Testing Yaesu FT-450D clone ... ok
> test_copy_all (tests.TestCase_YaesuFT450D)
> Testing Yaesu FT-450D copy all ... ok
> test_detect (tests.TestCase_YaesuFT450D)
> Testing Yaesu FT-450D detect ... ok
> test_edges (tests.TestCase_YaesuFT450D)
> Testing Yaesu FT-450D edges ... ok
> test_settings (tests.TestCase_YaesuFT450D)
> Testing Yaesu FT-450D settings ... ok
> test_banks (tests.TestCase_JetstreamJT270MH)
> Testing Jetstream JT270MH banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_JetstreamJT270MH)
> Testing Jetstream JT270MH brute force ... ok
> test_clone (tests.TestCase_JetstreamJT270MH)
> Testing Jetstream JT270MH clone ... ok
> test_copy_all (tests.TestCase_JetstreamJT270MH)
> Testing Jetstream JT270MH copy all ... ok
> test_detect (tests.TestCase_JetstreamJT270MH)
> Testing Jetstream JT270MH detect ... ok
> test_edges (tests.TestCase_JetstreamJT270MH)
> Testing Jetstream JT270MH edges ... ok
> test_settings (tests.TestCase_JetstreamJT270MH)
> Testing Jetstream JT270MH settings ... ok
> test_banks (tests.TestCase_YaesuFT2D)
> Testing Yaesu FT2D banks ... ok
> test_brute_force (tests.TestCase_YaesuFT2D)
> Testing Yaesu FT2D brute force ... ok
> test_clone (tests.TestCase_YaesuFT2D)
> Testing Yaesu FT2D clone ... ok
> test_copy_all (tests.TestCase_YaesuFT2D)
> Testing Yaesu FT2D copy all ... ok
> test_detect (tests.TestCase_YaesuFT2D)
> Testing Yaesu FT2D detect ... ok
> test_edges (tests.TestCase_YaesuFT2D)
> Testing Yaesu FT2D edges ... ok
> test_settings (tests.TestCase_YaesuFT2D)
> Testing Yaesu FT2D settings ... ok
> test_banks (tests.TestCase_MidlandDBR2500)
> Testing Midland DBR2500 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_MidlandDBR2500)
> Testing Midland DBR2500 brute force ... ok
> test_clone (tests.TestCase_MidlandDBR2500)
> Testing Midland DBR2500 clone ... ok
> test_copy_all (tests.TestCase_MidlandDBR2500)
> Testing Midland DBR2500 copy all ... ok
> test_detect (tests.TestCase_MidlandDBR2500)
> Testing Midland DBR2500 detect ... ok
> test_edges (tests.TestCase_MidlandDBR2500)
> Testing Midland DBR2500 edges ... ok
> test_settings (tests.TestCase_MidlandDBR2500)
> Testing Midland DBR2500 settings ... ok
> test_banks (tests.TestCase_YaesuFT4VR)
> Testing Yaesu FT-4VR banks ... ok
> test_brute_force (tests.TestCase_YaesuFT4VR)
> Testing Yaesu FT-4VR brute force ... ok
> test_clone (tests.TestCase_YaesuFT4VR)
> Testing Yaesu FT-4VR clone ... ok
> test_copy_all (tests.TestCase_YaesuFT4VR)
> Testing Yaesu FT-4VR copy all ... ok
> test_detect (tests.TestCase_YaesuFT4VR)
> Testing Yaesu FT-4VR detect ... ok
> test_edges (tests.TestCase_YaesuFT4VR)
> Testing Yaesu FT-4VR edges ... ok
> test_settings (tests.TestCase_YaesuFT4VR)
> Testing Yaesu FT-4VR settings ... ok
> test_banks (tests.TestCase_KYDIP620)
> Testing KYD IP-620 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_KYDIP620)
> Testing KYD IP-620 brute force ... ok
> test_clone (tests.TestCase_KYDIP620)
> Testing KYD IP-620 clone ... ok
> test_copy_all (tests.TestCase_KYDIP620)
> Testing KYD IP-620 copy all ... ok
> test_detect (tests.TestCase_KYDIP620)
> Testing KYD IP-620 detect ... ok
> test_edges (tests.TestCase_KYDIP620)
> Testing KYD IP-620 edges ... ok
> test_settings (tests.TestCase_KYDIP620)
> Testing KYD IP-620 settings ... ok
> test_banks (tests.TestCase_PolmarDB50M)
> Testing Polmar DB-50M banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_PolmarDB50M)
> Testing Polmar DB-50M brute force ... ok
> test_clone (tests.TestCase_PolmarDB50M)
> Testing Polmar DB-50M clone ... ok
> test_copy_all (tests.TestCase_PolmarDB50M)
> Testing Polmar DB-50M copy all ... ok
> test_detect (tests.TestCase_PolmarDB50M)
> Testing Polmar DB-50M detect ... ok
> test_edges (tests.TestCase_PolmarDB50M)
> Testing Polmar DB-50M edges ... ok
> test_settings (tests.TestCase_PolmarDB50M)
> Testing Polmar DB-50M settings ... ok
> test_banks (tests.TestCase_YaesuFT4XE)
> Testing Yaesu FT-4XE banks ... ok
> test_brute_force (tests.TestCase_YaesuFT4XE)
> Testing Yaesu FT-4XE brute force ... ok
> test_clone (tests.TestCase_YaesuFT4XE)
> Testing Yaesu FT-4XE clone ... ok
> test_copy_all (tests.TestCase_YaesuFT4XE)
> Testing Yaesu FT-4XE copy all ... ok
> test_detect (tests.TestCase_YaesuFT4XE)
> Testing Yaesu FT-4XE detect ... ok
> test_edges (tests.TestCase_YaesuFT4XE)
> Testing Yaesu FT-4XE edges ... ok
> test_settings (tests.TestCase_YaesuFT4XE)
> Testing Yaesu FT-4XE settings ... ok
> test_banks (tests.TestCase_YaesuFT3D)
> Testing Yaesu FT3D banks ... ok
> test_brute_force (tests.TestCase_YaesuFT3D)
> Testing Yaesu FT3D brute force ... ok
> test_clone (tests.TestCase_YaesuFT3D)
> Testing Yaesu FT3D clone ... ok
> test_copy_all (tests.TestCase_YaesuFT3D)
> Testing Yaesu FT3D copy all ... ok
> test_detect (tests.TestCase_YaesuFT3D)
> Testing Yaesu FT3D detect ... ok
> test_edges (tests.TestCase_YaesuFT3D)
> Testing Yaesu FT3D edges ... ok
> test_settings (tests.TestCase_YaesuFT3D)
> Testing Yaesu FT3D settings ... ok
> test_banks (tests.TestCase_YaesuFT4XR)
> Testing Yaesu FT-4XR banks ... ok
> test_brute_force (tests.TestCase_YaesuFT4XR)
> Testing Yaesu FT-4XR brute force ... ok
> test_clone (tests.TestCase_YaesuFT4XR)
> Testing Yaesu FT-4XR clone ... ok
> test_copy_all (tests.TestCase_YaesuFT4XR)
> Testing Yaesu FT-4XR copy all ... ok
> test_detect (tests.TestCase_YaesuFT4XR)
> Testing Yaesu FT-4XR detect ... ok
> test_edges (tests.TestCase_YaesuFT4XR)
> Testing Yaesu FT-4XR edges ... ok
> test_settings (tests.TestCase_YaesuFT4XR)
> Testing Yaesu FT-4XR settings ... ok
> test_banks (tests.TestCase_YaesuFTM3200D)
> Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFTM3200D)
> Testing Yaesu FTM-3200D brute force ... ok
> test_clone (tests.TestCase_YaesuFTM3200D)
> Testing Yaesu FTM-3200D clone ... ok
> test_copy_all (tests.TestCase_YaesuFTM3200D)
> Testing Yaesu FTM-3200D copy all ... ok
> test_detect (tests.TestCase_YaesuFTM3200D)
> Testing Yaesu FTM-3200D detect ... ok
> test_edges (tests.TestCase_YaesuFTM3200D)
> Testing Yaesu FTM-3200D edges ... ok
> test_settings (tests.TestCase_YaesuFTM3200D)
> Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_YaesuFT50)
> Testing Yaesu FT-50 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFT50)
> Testing Yaesu FT-50 brute force ... ok
> test_clone (tests.TestCase_YaesuFT50)
> Testing Yaesu FT-50 clone ... ok
> test_copy_all (tests.TestCase_YaesuFT50)
> Testing Yaesu FT-50 copy all ... ok
> test_detect (tests.TestCase_YaesuFT50)
> Testing Yaesu FT-50 detect ... ok
> test_edges (tests.TestCase_YaesuFT50)
> Testing Yaesu FT-50 edges ... ok
> test_settings (tests.TestCase_YaesuFT50)
> Testing Yaesu FT-50 settings ... ok
> test_banks (tests.TestCase_YaesuFT60)
> Testing Yaesu FT-60 banks ... ok
> test_brute_force (tests.TestCase_YaesuFT60)
> Testing Yaesu FT-60 brute force ... ok
> test_clone (tests.TestCase_YaesuFT60)
> Testing Yaesu FT-60 clone ... ok
> test_copy_all (tests.TestCase_YaesuFT60)
> Testing Yaesu FT-60 copy all ... ok
> test_detect (tests.TestCase_YaesuFT60)
> Testing Yaesu FT-60 detect ... ok
> test_edges (tests.TestCase_YaesuFT60)
> Testing Yaesu FT-60 edges ... ok
> test_settings (tests.TestCase_YaesuFT60)
> Testing Yaesu FT-60 settings ... ok
> test_banks (tests.TestCase_YaesuFTM350)
> Testing Yaesu FTM-350 banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFTM350)
> Testing Yaesu FTM-350 brute force ... ok
> test_clone (tests.TestCase_YaesuFTM350)
> Testing Yaesu FTM-350 clone ... ok
> test_copy_all (tests.TestCase_YaesuFTM350)
> Testing Yaesu FTM-350 copy all ... ok
> test_detect (tests.TestCase_YaesuFTM350)
> Testing Yaesu FTM-350 detect ... ok
> test_edges (tests.TestCase_YaesuFTM350)
> Testing Yaesu FTM-350 edges ... ok
> test_settings (tests.TestCase_YaesuFTM350)
> Testing Yaesu FTM-350 settings ... skipped 'Settings not supported'
> test_banks (tests.TestCase_YaesuFT65E)
> Testing Yaesu FT-65E banks ... ok
> test_brute_force (tests.TestCase_YaesuFT65E)
> Testing Yaesu FT-65E brute force ... ok
> test_clone (tests.TestCase_YaesuFT65E)
> Testing Yaesu FT-65E clone ... ok
> test_copy_all (tests.TestCase_YaesuFT65E)
> Testing Yaesu FT-65E copy all ... ok
> test_detect (tests.TestCase_YaesuFT65E)
> Testing Yaesu FT-65E detect ... ok
> test_edges (tests.TestCase_YaesuFT65E)
> Testing Yaesu FT-65E edges ... ok
> test_settings (tests.TestCase_YaesuFT65E)
> Testing Yaesu FT-65E settings ... ok
> test_banks (tests.TestCase_YaesuFTM7250D)
> Testing Yaesu FTM-7250D banks ... skipped 'Banks not supported'
> test_brute_force (tests.TestCase_YaesuFTM7250D)
> Testing Yaesu FTM-7250D brute force ... ok
> test_clone (tests.TestCase_YaesuFTM7250D)
> Testing Yaesu FTM-7250D clone ... ok
> test_copy_all (tests.TestCase_YaesuFTM7250D)
> Testing Yaesu FTM-7250D copy all ... ok
> test_detect (tests.TestCase_YaesuFTM7250D)
> Testing Yaesu FTM-7250D detect ... ok
> test_edges (tests.TestCase_YaesuFTM7250D)
> Testing Yaesu FTM-7250D edges ... ok
> test_settings (tests.TestCase_YaesuFTM7250D)
> Testing Yaesu FTM-7250D settings ... skipped 'Settings not supported'
>
> ----------------------------------------------------------------------
> Ran 1043 tests in 478.111s
>
> OK (skipped=142)
>
> struct memory {
> bbcd rx_freq[4];
> bbcd tx_freq[4];
> lbcd rx_tone[2];
> lbcd tx_tone[2];
>
> u8 unknown10:5,
> highpower:1,
> unknown11:2;
> u8 unknown20:4,
> narrow:1,
> unknown21:3;
> u8 unknown31:1,
> scanadd:1,
> unknown32:6;
> u8 unknown4;
> };
>
> struct name {
> char name[7];
> };
>
> #seekto 0x0010;
> struct memory channels[128];
>
> #seekto 0x08C0;
> struct name names[128];
>
> #seekto 0x2020;
> struct memory vfo1;
> struct memory vfo2;
>
> style create: /chirp/.tox/style
> style installdeps: pep8==1.6.2, future
> style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
> style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
> style run-test-pre: PYTHONHASHSEED='236763696'
> style run-test: commands[0] | python ./tools/cpep8.py
> ___________________________________ summary ____________________________________
> unit: commands succeeded
> driver: commands succeeded
> style: commands succeeded
> congratulations :)
> Email was triggered for: Success
> Sending email for trigger: Success
>
> _______________________________________________
> chirp_devel mailing list
> chirp_devel at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
> Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20210108/4f2eae11/attachment-0001.html
More information about the chirp_devel
mailing list