[chirp_devel] Build test results: Failure

Build System
Mon Apr 5 07:44:35 PDT 2021 

Tested changes:

Changes for Build #910
[Jim Unroe <rock.unroe at gmail.com>] [RT76] Retevis RT76

This patch adds support for the Retevis RT76.

Related to #8959

[Jim Unroe <rock.unroe at gmail.com>] [RB26] Retevis RB26

This patch adds support for the Retevis RB26.

Related to #8661

[Jim Unroe <rock.unroe at gmail.com>] [RB17A] Retevis RB17A

This patch adds support for the Retevis RB17A.

Related to #8957

[Jim Unroe <rock.unroe at gmail.com>] [RT21] Driver Maintenance: retevis_rt21.py

This patch is prepare the driver for adding additional radio models.

1: fixes some incorrect code
2: reformats some code
3: allows CHIRP to make 5 attempts at putting radio into programming mode.

Other than for number 3, no features or settings have been added or removed from
this driver.

Related to #8957, #8661 and #8959

[Rick DeWitt <aa0rd at yahoo.com>] [icomciv] Add IC-7300 Live Mode support, Issue #4013

[Jim Unroe <rock.unroe at gmail.com>] [AT-778UV] Add support model variants that include VOX

This patch adds support for the new model variants that now include VOX:

Anytone AT-778UV VOX 3.0
Retevis RT95 VOX 2.0

fixes #8859

[Jim Unroe <rock.unroe at gmail.com>] [AT-778UV] Add anytone778uv.py driver to cpep8.manifext

This patch adds the anytone778uv.py driver to the cpep8.manifest in order to
enable style checking.

related to #8859

[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281

[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141

[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281

[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292

[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269

[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231

[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212

[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214

[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117

[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181

[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176

[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172

[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels

[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122

[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166

[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163

[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145




Full log:

[...truncated 812 lines...]
test_copy_all (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D copy all ... ok
test_detect (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D detect ... ok
test_edges (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D edges ... ok
test_settings (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D settings ... ok
test_banks (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G banks ... ok
test_brute_force (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G brute force ... ok
test_clone (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G clone ... ok
test_copy_all (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G copy all ... ok
test_detect (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G detect ... ok
test_edges (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G edges ... ok
test_settings (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G settings ... ok
test_banks (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 brute force ... ok
test_clone (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 clone ... ok
test_copy_all (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 copy all ... ok
test_detect (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 detect ... ok
test_edges (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 edges ... ok
test_settings (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 settings ... ok
test_banks (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 banks ... ok
test_brute_force (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 brute force ... ok
test_clone (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 clone ... ok
test_copy_all (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 copy all ... ok
test_detect (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 detect ... ok
test_edges (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 edges ... ok
test_settings (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 detect ... ok
test_edges (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 edges ... ok
test_settings (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 settings ... ok
test_banks (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 brute force ... ok
test_clone (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 clone ... ok
test_copy_all (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 copy all ... ok
test_detect (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 detect ... ok
test_edges (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 edges ... ok
test_settings (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 settings ... ok
test_banks (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 brute force ... ok
test_clone (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 clone ... ok
test_copy_all (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 copy all ... ok
test_detect (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 detect ... ok
test_edges (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 edges ... ok
test_settings (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 settings ... ok
test_banks (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M brute force ... ok
test_clone (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M copy all ... ok
test_detect (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M detect ... ok
test_edges (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M edges ... ok
test_settings (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 banks ... ok
test_brute_force (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 brute force ... ok
test_clone (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 clone ... ok
test_copy_all (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 copy all ... ok
test_detect (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 detect ... ok
test_edges (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 edges ... ok
test_settings (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 brute force ... ok
test_clone (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 clone ... ok
test_copy_all (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 copy all ... ok
test_detect (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 detect ... ok
test_edges (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 edges ... ok
test_settings (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 settings ... ok
test_banks (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 brute force ... ok
test_clone (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 clone ... ok
test_copy_all (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 copy all ... ok
test_detect (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 detect ... ok
test_edges (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 edges ... ok
test_settings (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 detect ... ok
test_edges (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 edges ... ok
test_settings (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 settings ... ok
test_banks (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A brute force ... ok
test_clone (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A clone ... ok
test_copy_all (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A copy all ... ok
test_detect (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A detect ... ok
test_edges (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A edges ... ok
test_settings (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 detect ... ok
test_edges (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 settings ... ok
test_banks (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND brute force ... ok
test_clone (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND clone ... ok
test_copy_all (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND copy all ... ok
test_detect (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND detect ... ok
test_edges (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND edges ... ok
test_settings (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND settings ... ok
test_banks (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 brute force ... ok
test_clone (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 clone ... ok
test_copy_all (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 copy all ... ok
test_detect (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 detect ... ok
test_edges (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 edges ... ok
test_settings (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 settings ... ok
test_banks (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M brute force ... ok
test_clone (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M copy all ... ok
test_detect (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M detect ... ok
test_edges (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M edges ... ok
test_settings (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RadioddityR2)
Testing Radioddity R2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityR2)
Testing Radioddity R2 brute force ... ok
test_clone (tests.TestCase_RadioddityR2)
Testing Radioddity R2 clone ... ok
test_copy_all (tests.TestCase_RadioddityR2)
Testing Radioddity R2 copy all ... ok
test_detect (tests.TestCase_RadioddityR2)
Testing Radioddity R2 detect ... ok
test_edges (tests.TestCase_RadioddityR2)
Testing Radioddity R2 edges ... ok
test_settings (tests.TestCase_RadioddityR2)
Testing Radioddity R2 settings ... ok
test_banks (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus brute force ... ok
test_clone (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus clone ... ok
test_copy_all (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus copy all ... ok
test_detect (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus detect ... ok
test_edges (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus edges ... ok
test_settings (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus settings ... ok
test_banks (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) detect ... ok
test_edges (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) edges ... ok
test_settings (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) settings ... ok
test_banks (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E brute force ... ok
test_clone (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E clone ... ok
test_copy_all (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E copy all ... ok
test_detect (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E detect ... ok
test_edges (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E edges ... ok
test_settings (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 detect ... ok
test_edges (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 edges ... ok
test_settings (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR banks ... ok
test_brute_force (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR brute force ... ok
test_clone (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR clone ... ok
test_copy_all (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR copy all ... ok
test_detect (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR detect ... ok
test_edges (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR edges ... ok
test_settings (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR settings ... ok
test_banks (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 brute force ... ok
test_clone (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 clone ... ok
test_copy_all (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 copy all ... ok
test_detect (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 detect ... ok
test_edges (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 edges ... ok
test_settings (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 settings ... ok
test_banks (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 detect ... ok
test_edges (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 edges ... ok
test_settings (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 settings ... ok
test_banks (tests.TestCase_RadtelT18)
Testing Radtel T18 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadtelT18)
Testing Radtel T18 brute force ... ok
test_clone (tests.TestCase_RadtelT18)
Testing Radtel T18 clone ... ok
test_copy_all (tests.TestCase_RadtelT18)
Testing Radtel T18 copy all ... ok
test_detect (tests.TestCase_RadtelT18)
Testing Radtel T18 detect ... ok
test_edges (tests.TestCase_RadtelT18)
Testing Radtel T18 edges ... ok
test_settings (tests.TestCase_RadtelT18)
Testing Radtel T18 settings ... ok
test_banks (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 brute force ... ok
test_clone (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 clone ... ok
test_copy_all (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 copy all ... ok
test_detect (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 detect ... ok
test_edges (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 edges ... ok
test_settings (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 settings ... ok
test_banks (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV brute force ... ok
test_clone (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV clone ... ok
test_copy_all (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV copy all ... ok
test_detect (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV detect ... ok
test_edges (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV edges ... ok
test_settings (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV settings ... ok
test_banks (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R detect ... ok
test_edges (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R edges ... ok
test_settings (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 detect ... ok
test_edges (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 edges ... ok
test_settings (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 settings ... ok
test_banks (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A brute force ... ok
test_clone (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A clone ... ok
test_copy_all (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A copy all ... ok
test_detect (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A detect ... ok
test_edges (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB17A)
Testing Retevis RB17A settings ... ok
test_banks (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 brute force ... ok
test_clone (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 copy all ... ok
test_detect (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 detect ... ok
test_edges (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 edges ... ok
test_settings (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 settings ... ok
test_banks (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 brute force ... ok
test_clone (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 copy all ... ok
test_detect (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 detect ... ok
test_edges (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 edges ... ok
test_settings (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 settings ... ok
test_banks (tests.TestCase_IcomID31A)
Testing Icom ID-31A banks ... ok
test_brute_force (tests.TestCase_IcomID31A)
Testing Icom ID-31A brute force ... ok
test_clone (tests.TestCase_IcomID31A)
Testing Icom ID-31A clone ... ok
test_copy_all (tests.TestCase_IcomID31A)
Testing Icom ID-31A copy all ... ok
test_detect (tests.TestCase_IcomID31A)
Testing Icom ID-31A detect ... ok
test_edges (tests.TestCase_IcomID31A)
Testing Icom ID-31A edges ... ok
test_settings (tests.TestCase_IcomID31A)
Testing Icom ID-31A settings ... ok
test_banks (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A detect ... ok
test_edges (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A edges ... ok
test_settings (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A settings ... ok
test_banks (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE banks ... ok
test_brute_force (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE brute force ... ok
test_clone (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE clone ... ok
test_copy_all (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE copy all ... ok
test_detect (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE detect ... ok
test_edges (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE edges ... ok
test_settings (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE settings ... ok
test_banks (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D banks ... ok
test_brute_force (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D brute force ... ok
test_clone (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D clone ... ok
test_copy_all (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D copy all ... ok
test_detect (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D detect ... ok
test_edges (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D edges ... ok
test_settings (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D settings ... ok
test_banks (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode settings ... ok
test_banks (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 brute force ... ok
test_clone (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 copy all ... ok
test_detect (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 detect ... ok
test_edges (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 edges ... ok
test_settings (tests.TestCase_TYTTHUV88)
Testing TYT TH-UV88 settings ... ok
test_banks (tests.TestCase_RetevisRB26)
Testing Retevis RB26 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRB26)
Testing Retevis RB26 brute force ... ok
test_clone (tests.TestCase_RetevisRB26)
Testing Retevis RB26 clone ... ok
test_copy_all (tests.TestCase_RetevisRB26)
Testing Retevis RB26 copy all ... ok
test_detect (tests.TestCase_RetevisRB26)
Testing Retevis RB26 detect ... ok
test_edges (tests.TestCase_RetevisRB26)
Testing Retevis RB26 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRB26)
Testing Retevis RB26 settings ... ok
test_banks (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 detect ... ok
test_edges (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 edges ... ok
test_settings (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 settings ... ok
test_banks (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) detect ... ok
test_edges (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) edges ... ok
test_settings (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) settings ... ok
test_banks (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B detect ... ok
test_edges (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B edges ... ok
test_settings (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B settings ... ok
test_banks (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R banks ... ok
test_brute_force (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R brute force ... ok
test_clone (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R clone ... ok
test_copy_all (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R copy all ... ok
test_detect (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R detect ... ok
test_edges (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R edges ... ok
test_settings (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R settings ... ok
test_banks (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R banks ... ok
test_brute_force (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R brute force ... ok
test_clone (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R clone ... ok
test_copy_all (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R copy all ... ok
test_detect (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R detect ... ok
test_edges (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R edges ... ok
test_settings (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R settings ... ok
test_banks (tests.TestCase_RetevisRT1)
Testing Retevis RT1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT1)
Testing Retevis RT1 brute force ... ok
test_clone (tests.TestCase_RetevisRT1)
Testing Retevis RT1 clone ... ok
test_copy_all (tests.TestCase_RetevisRT1)
Testing Retevis RT1 copy all ... ok
test_detect (tests.TestCase_RetevisRT1)
Testing Retevis RT1 detect ... ok
test_edges (tests.TestCase_RetevisRT1)
Testing Retevis RT1 edges ... ok
test_settings (tests.TestCase_RetevisRT1)
Testing Retevis RT1 settings ... ok
test_banks (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 brute force ... ok
test_clone (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 clone ... ok
test_copy_all (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 copy all ... ok
test_detect (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 detect ... ok
test_edges (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 edges ... ok
test_settings (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 settings ... ok
test_banks (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode settings ... ok
test_banks (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 brute force ... ok
test_clone (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 clone ... ok
test_copy_all (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 copy all ... ok
test_detect (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 detect ... ok
test_edges (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 edges ... ok
test_settings (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 settings ... ok
test_banks (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 banks ... ok
test_brute_force (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 brute force ... ok
test_clone (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 copy all ... ok
test_detect (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 detect ... ok
test_edges (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 edges ... ok
test_settings (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B detect ... ok
test_edges (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B edges ... ok
test_settings (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B settings ... ok
test_banks (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M brute force ... ok
test_clone (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M clone ... ok
test_copy_all (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M copy all ... ok
test_detect (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M detect ... ok
test_edges (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M edges ... ok
test_settings (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT21)
Testing Retevis RT21 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT21)
Testing Retevis RT21 brute force ... ok
test_clone (tests.TestCase_RetevisRT21)
Testing Retevis RT21 clone ... ok
test_copy_all (tests.TestCase_RetevisRT21)
Testing Retevis RT21 copy all ... ok
test_detect (tests.TestCase_RetevisRT21)
Testing Retevis RT21 detect ... ok
test_edges (tests.TestCase_RetevisRT21)
Testing Retevis RT21 edges ... ok
test_settings (tests.TestCase_RetevisRT21)
Testing Retevis RT21 settings ... ok
test_banks (tests.TestCase_IcomID51)
Testing Icom ID-51 banks ... ok
test_brute_force (tests.TestCase_IcomID51)
Testing Icom ID-51 brute force ... ok
test_clone (tests.TestCase_IcomID51)
Testing Icom ID-51 clone ... ok
test_copy_all (tests.TestCase_IcomID51)
Testing Icom ID-51 copy all ... ok
test_detect (tests.TestCase_IcomID51)
Testing Icom ID-51 detect ... ok
test_edges (tests.TestCase_IcomID51)
Testing Icom ID-51 edges ... ok
test_settings (tests.TestCase_IcomID51)
Testing Icom ID-51 settings ... ok
test_banks (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 brute force ... ok
test_clone (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 clone ... ok
test_copy_all (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 copy all ... ok
test_detect (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 detect ... ok
test_edges (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 edges ... ok
test_settings (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 settings ... ok
test_banks (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode settings ... ok
test_banks (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 brute force ... ok
test_clone (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 copy all ... ok
test_detect (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 detect ... ok
test_edges (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 edges ... ok
test_settings (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_IcomIC208H)
Testing Icom IC-208H banks ... ok
test_brute_force (tests.TestCase_IcomIC208H)
Testing Icom IC-208H brute force ... ok
test_clone (tests.TestCase_IcomIC208H)
Testing Icom IC-208H clone ... ok
test_copy_all (tests.TestCase_IcomIC208H)
Testing Icom IC-208H copy all ... ok
test_detect (tests.TestCase_IcomIC208H)
Testing Icom IC-208H detect ... ok
test_edges (tests.TestCase_IcomIC208H)
Testing Icom IC-208H edges ... ok
test_settings (tests.TestCase_IcomIC208H)
Testing Icom IC-208H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 brute force ... ok
test_clone (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 clone ... ok
test_copy_all (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 copy all ... ok
test_detect (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 detect ... ok
test_edges (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 edges ... ok
test_settings (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 settings ... ok
test_banks (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R banks ... ok
test_brute_force (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R brute force ... ok
test_clone (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R clone ... ok
test_copy_all (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R copy all ... ok
test_detect (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R detect ... ok
test_edges (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R edges ... ok
test_settings (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R settings ... ok
test_banks (tests.TestCase_RetevisRT22)
Testing Retevis RT22 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22)
Testing Retevis RT22 brute force ... ok
test_clone (tests.TestCase_RetevisRT22)
Testing Retevis RT22 clone ... ok
test_copy_all (tests.TestCase_RetevisRT22)
Testing Retevis RT22 copy all ... ok
test_detect (tests.TestCase_RetevisRT22)
Testing Retevis RT22 detect ... ok
test_edges (tests.TestCase_RetevisRT22)
Testing Retevis RT22 edges ... ok
test_settings (tests.TestCase_RetevisRT22)
Testing Retevis RT22 settings ... ok
test_banks (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 brute force ... ok
test_clone (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 clone ... ok
test_copy_all (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 copy all ... ok
test_detect (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 detect ... ok
test_edges (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 edges ... ok
test_settings (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode settings ... ok
test_banks (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H brute force ... ok
test_clone (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H clone ... ok
test_copy_all (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H copy all ... ok
test_detect (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H detect ... ok
test_edges (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H edges ... ok
test_settings (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS brute force ... ok
test_clone (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS clone ... ok
test_copy_all (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS copy all ... ok
test_detect (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS detect ... ok
test_edges (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS edges ... ok
test_settings (tests.TestCase_RetevisRT22FRS)
Testing Retevis RT22FRS settings ... ok
test_banks (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D brute force ... ok
test_clone (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D clone ... ok
test_copy_all (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D copy all ... ok
test_detect (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D detect ... ok
test_edges (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D edges ... ok
test_settings (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D settings ... ok
test_banks (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus banks ... ok
test_brute_force (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus brute force ... ok
test_clone (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus clone ... ok
test_copy_all (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus copy all ... ok
test_detect (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus detect ... ok
test_edges (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus edges ... ok
test_settings (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus settings ... ok
test_banks (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 brute force ... ok
test_clone (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 clone ... ok
test_copy_all (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 copy all ... ok
test_detect (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 detect ... ok
test_edges (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 edges ... ok
test_settings (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 settings ... ok
test_banks (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 brute force ... ok
test_clone (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 clone ... ok
test_copy_all (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 copy all ... ok
test_detect (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 detect ... ok
test_edges (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 edges ... ok
test_settings (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 settings ... ok
test_banks (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV brute force ... ok
test_clone (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV clone ... ok
test_copy_all (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV copy all ... ok
test_detect (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV detect ... ok
test_edges (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV edges ... ok
test_settings (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV settings ... ok
test_banks (tests.TestCase_IcomIC2200H)
Testing Icom IC-2200H banks ... ok
test_brute_force (tests.TestCase_IcomIC2200H)
Testing Icom IC-2200H brute force ... ok
test_clone (tests.TestCase_IcomIC2200H)
Testing Icom IC-2200H clone ... ok
test_copy_all (tests.TestCase_IcomIC2200H)
Testing Icom IC-2200H copy all ... ok
test_detect (tests.TestCase_IcomIC2200H)
Testing Icom IC-2200H detect ... ok
test_edges (tests.TestCase_IcomIC2200H)
Testing Icom IC-2200H edges ... ok
test_settings (tests.TestCase_IcomIC2200H)
Testing Icom IC-2200H settings ... ok
test_banks (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D banks ... ok
test_brute_force (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D brute force ... ok
test_clone (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D clone ... ok
test_copy_all (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D copy all ... ok
test_detect (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D detect ... ok
test_edges (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D edges ... ok
test_settings (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D settings ... ok
test_banks (tests.TestCase_RetevisRT23)
Testing Retevis RT23 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT23)
Testing Retevis RT23 brute force ... ok
test_clone (tests.TestCase_RetevisRT23)
Testing Retevis RT23 clone ... ok
test_copy_all (tests.TestCase_RetevisRT23)
Testing Retevis RT23 copy all ... ok
test_detect (tests.TestCase_RetevisRT23)
Testing Retevis RT23 detect ... ok
test_edges (tests.TestCase_RetevisRT23)
Testing Retevis RT23 edges ... ok
test_settings (tests.TestCase_RetevisRT23)
Testing Retevis RT23 settings ... ok
test_banks (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR banks ... ok
test_brute_force (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR brute force ... ok
test_clone (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR clone ... ok
test_copy_all (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR copy all ... ok
test_detect (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR detect ... ok
test_edges (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR edges ... ok
test_settings (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR settings ... ok
test_banks (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG brute force ... ok
test_clone (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG clone ... ok
test_copy_all (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG copy all ... ok
test_detect (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG detect ... ok
test_edges (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG edges ... ok
test_settings (tests.TestCase_AlincoDJG7EG)
Testing Alinco DJ-G7EG settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 brute force ... ok
test_clone (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 clone ... ok
test_copy_all (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 copy all ... ok
test_detect (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 detect ... ok
test_edges (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 edges ... ok
test_settings (tests.TestCase_BTECHUV5X3)
Testing BTECH UV-5X3 settings ... ok
test_banks (tests.TestCase_IcomID800H)
Testing Icom ID-800H banks ... ok
test_brute_force (tests.TestCase_IcomID800H)
Testing Icom ID-800H brute force ... ok
test_clone (tests.TestCase_IcomID800H)
Testing Icom ID-800H clone ... ok
test_copy_all (tests.TestCase_IcomID800H)
Testing Icom ID-800H copy all ... ok
test_detect (tests.TestCase_IcomID800H)
Testing Icom ID-800H detect ... ok
test_edges (tests.TestCase_IcomID800H)
Testing Icom ID-800H edges ... ok
test_settings (tests.TestCase_IcomID800H)
Testing Icom ID-800H settings ... ok
test_banks (tests.TestCase_IcomIC2300H)
Testing Icom IC-2300H banks ... ok
test_brute_force (tests.TestCase_IcomIC2300H)
Testing Icom IC-2300H brute force ... ok
test_clone (tests.TestCase_IcomIC2300H)
Testing Icom IC-2300H clone ... ok
test_copy_all (tests.TestCase_IcomIC2300H)
Testing Icom IC-2300H copy all ... ok
test_detect (tests.TestCase_IcomIC2300H)
Testing Icom IC-2300H detect ... ok
test_edges (tests.TestCase_IcomIC2300H)
Testing Icom IC-2300H edges ... ok
test_settings (tests.TestCase_IcomIC2300H)
Testing Icom IC-2300H settings ... ok
test_banks (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 brute force ... ok
test_clone (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 clone ... ok
test_copy_all (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 copy all ... ok
test_detect (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 detect ... ok
test_edges (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 edges ... ok
test_settings (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 settings ... ok
test_banks (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 brute force ... ok
test_clone (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 clone ... ok
test_copy_all (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 copy all ... ok
test_detect (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 detect ... ok
test_edges (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 edges ... ok
test_settings (tests.TestCase_LeixenVV898)
Testing Leixen VV-898 settings ... ok
test_banks (tests.TestCase_RetevisRT26)
Testing Retevis RT26 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT26)
Testing Retevis RT26 brute force ... ok
test_clone (tests.TestCase_RetevisRT26)
Testing Retevis RT26 clone ... ok
test_copy_all (tests.TestCase_RetevisRT26)
Testing Retevis RT26 copy all ... ok
test_detect (tests.TestCase_RetevisRT26)
Testing Retevis RT26 detect ... ERROR
test_edges (tests.TestCase_RetevisRT26)
Testing Retevis RT26 edges ... ok
test_settings (tests.TestCase_RetevisRT26)
Testing Retevis RT26 settings ... ok
test_banks (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE banks ... ok
test_brute_force (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE brute force ... ok
test_clone (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE clone ... ok
test_copy_all (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE copy all ... ok
test_detect (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE detect ... ok
test_edges (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE edges ... ok
test_settings (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE settings ... ok
test_banks (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 brute force ... ok
test_clone (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 clone ... ok
test_copy_all (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 copy all ... ok
test_detect (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 detect ... ok
test_edges (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 edges ... ok
test_settings (tests.TestCase_BaofengBF888)
Testing Baofeng BF-888 settings ... ok
test_banks (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 brute force ... ok
test_clone (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 clone ... ok
test_copy_all (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 copy all ... ok
test_detect (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 detect ... ok
test_edges (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 edges ... ok
test_settings (tests.TestCase_AlincoDJ175)
Testing Alinco DJ175 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H banks ... ok
test_brute_force (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H brute force ... ok
test_clone (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H clone ... ok
test_copy_all (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H copy all ... ok
test_detect (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H detect ... ok
test_edges (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H edges ... ok
test_settings (tests.TestCase_IcomIC2720H)
Testing Icom IC-2720H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 brute force ... ok
test_clone (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 clone ... ok
test_copy_all (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 copy all ... ok
test_detect (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 detect ... ok
test_edges (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 edges ... ok
test_settings (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 settings ... ok
test_banks (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D banks ... ok
test_brute_force (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D brute force ... ok
test_clone (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D clone ... ok
test_copy_all (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D copy all ... ok
test_detect (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D detect ... ok
test_edges (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D edges ... ok
test_settings (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D settings ... ok
test_banks (tests.TestCase_IcomID880H)
Testing Icom ID-880H banks ... ok
test_brute_force (tests.TestCase_IcomID880H)
Testing Icom ID-880H brute force ... ok
test_clone (tests.TestCase_IcomID880H)
Testing Icom ID-880H clone ... ok
test_copy_all (tests.TestCase_IcomID880H)
Testing Icom ID-880H copy all ... ok
test_detect (tests.TestCase_IcomID880H)
Testing Icom ID-880H detect ... ok
test_edges (tests.TestCase_IcomID880H)
Testing Icom ID-880H edges ... ok
test_settings (tests.TestCase_IcomID880H)
Testing Icom ID-880H settings ... ok
test_banks (tests.TestCase_RetevisRT622)
Testing Retevis RT622 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT622)
Testing Retevis RT622 brute force ... ok
test_clone (tests.TestCase_RetevisRT622)
Testing Retevis RT622 clone ... ok
test_copy_all (tests.TestCase_RetevisRT622)
Testing Retevis RT622 copy all ... ok
test_detect (tests.TestCase_RetevisRT622)
Testing Retevis RT622 detect ... ok
test_edges (tests.TestCase_RetevisRT622)
Testing Retevis RT622 edges ... ok
test_settings (tests.TestCase_RetevisRT622)
Testing Retevis RT622 settings ... ok
test_banks (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S brute force ... ok
test_clone (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S clone ... ok
test_copy_all (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S copy all ... ok
test_detect (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S detect ... ok
test_edges (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S edges ... ok
test_settings (tests.TestCase_LeixenVV898S)
Testing Leixen VV-898S settings ... ok
test_banks (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 brute force ... ok
test_clone (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 clone ... ok
test_copy_all (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 copy all ... ok
test_detect (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 detect ... ok
test_edges (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 edges ... ok
test_settings (tests.TestCase_AlincoDJ596)
Testing Alinco DJ596 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S brute force ... ok
test_clone (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S clone ... ok
test_copy_all (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S copy all ... ok
test_detect (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S detect ... ok
test_edges (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S edges ... ok
test_settings (tests.TestCase_BaofengBFA58S)
Testing Baofeng BF-A58S settings ... ok
test_banks (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR banks ... ok
test_brute_force (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR brute force ... ok
test_clone (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR clone ... ok
test_copy_all (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR copy all ... ok
test_detect (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR detect ... ok
test_edges (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR edges ... ok
test_settings (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR settings ... ok
test_banks (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 brute force ... ok
test_clone (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 copy all ... ok
test_detect (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 detect ... ok
test_edges (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 edges ... ok
test_settings (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 settings ... ok
test_banks (tests.TestCase_RetevisRT76)
Testing Retevis RT76 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT76)
Testing Retevis RT76 brute force ... ok
test_clone (tests.TestCase_RetevisRT76)
Testing Retevis RT76 clone ... ok
test_copy_all (tests.TestCase_RetevisRT76)
Testing Retevis RT76 copy all ... ok
test_detect (tests.TestCase_RetevisRT76)
Testing Retevis RT76 detect ... ok
test_edges (tests.TestCase_RetevisRT76)
Testing Retevis RT76 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_RetevisRT76)
Testing Retevis RT76 settings ... ok
test_banks (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A banks ... ok
test_brute_force (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A brute force ... ok
test_clone (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A clone ... ok
test_copy_all (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A copy all ... ok
test_detect (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A detect ... ok
test_edges (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A edges ... ok
test_settings (tests.TestCase_IcomIC2730A)
Testing Icom IC-2730A settings ... ok
test_banks (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M brute force ... ok
test_clone (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M clone ... ok
test_copy_all (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M copy all ... ok
test_detect (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M detect ... ok
test_edges (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M edges ... ok
test_settings (tests.TestCase_JetstreamJT220M)
Testing Jetstream JT220M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 brute force ... ok
test_clone (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 clone ... ok
test_copy_all (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 copy all ... ok
test_detect (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 detect ... ok
test_edges (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 edges ... ok
test_settings (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 settings ... ok
test_banks (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D brute force ... ok
test_clone (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D copy all ... ok
test_detect (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D detect ... ok
test_edges (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D edges ... ok
test_settings (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D detect ... ok
test_edges (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D edges ... ok
test_settings (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D settings ... ok
test_banks (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M brute force ... ok
test_clone (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M clone ... ok
test_copy_all (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M copy all ... ok
test_detect (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M detect ... ok
test_edges (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M edges ... ok
test_settings (tests.TestCase_JetstreamJT270M)
Testing Jetstream JT270M settings ... ok
test_banks (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 brute force ... ok
test_clone (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 clone ... ok
test_copy_all (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 copy all ... ok
test_detect (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 detect ... ok
test_edges (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 edges ... ok
test_settings (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 settings ... ok
test_banks (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 banks ... ok
test_brute_force (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 brute force ... ok
test_clone (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 clone ... ok
test_copy_all (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 copy all ... ok
test_detect (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 detect ... ok
test_edges (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 edges ... ok
test_settings (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 settings ... ok
test_banks (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 brute force ... ok
test_clone (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 clone ... ok
test_copy_all (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 copy all ... ok
test_detect (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 detect ... ok
test_edges (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 edges ... ok
test_settings (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH brute force ... ok
test_clone (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH clone ... ok
test_copy_all (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH copy all ... ok
test_detect (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH detect ... ok
test_edges (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH edges ... ok
test_settings (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH settings ... ok
test_banks (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M brute force ... ok
test_clone (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M clone ... ok
test_copy_all (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M copy all ... ok
test_detect (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M detect ... ok
test_edges (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M edges ... ok
test_settings (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M settings ... ok
test_banks (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E banks ... ok
test_brute_force (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E brute force ... ok
test_clone (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E clone ... ok
test_copy_all (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E copy all ... ok
test_detect (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E detect ... ok
test_edges (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E edges ... ok
test_settings (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E settings ... ok
test_banks (tests.TestCase_KYDIP620)
Testing KYD IP-620 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KYDIP620)
Testing KYD IP-620 brute force ... ok
test_clone (tests.TestCase_KYDIP620)
Testing KYD IP-620 clone ... ok
test_copy_all (tests.TestCase_KYDIP620)
Testing KYD IP-620 copy all ... ok
test_detect (tests.TestCase_KYDIP620)
Testing KYD IP-620 detect ... ok
test_edges (tests.TestCase_KYDIP620)
Testing KYD IP-620 edges ... ok
test_settings (tests.TestCase_KYDIP620)
Testing KYD IP-620 settings ... ok
test_banks (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D brute force ... ok
test_clone (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D copy all ... ok
test_detect (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D detect ... ok
test_edges (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D edges ... ok
test_settings (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R brute force ... ok
test_clone (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R clone ... ok
test_copy_all (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R copy all ... ok
test_detect (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R detect ... ok
test_edges (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R edges ... ok
test_settings (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R settings ... skipped 'Settings not supported'

======================================================================
ERROR: test_detect (tests.TestCase_RetevisRT26)
Testing Retevis RT26 detect
----------------------------------------------------------------------
Traceback (most recent call last):
  File "tests/__init__.py", line 68, in test_detect
    self._runtest(run_tests.TestCaseDetect)
  File "tests/__init__.py", line 42, in _runtest
    failures = testcase.run()
  File "tests/run_tests.py", line 879, in run
    (self._wrapper._dstclass, radio.__class__))
TestFailedError: <class 'chirp.drivers.retevis_rt26.RT26Radio'> detected as <class 'chirp.drivers.retevis_rt21.RT21Radio'>

----------------------------------------------------------------------
Ran 1064 tests in 477.664s

FAILED (errors=1, skipped=148)

struct memory {
  bbcd rx_freq[4];
  bbcd tx_freq[4];
  lbcd rx_tone[2];
  lbcd tx_tone[2];

  u8 unknown10:5,
     highpower:1,
     unknown11:2;
  u8 unknown20:4,
     narrow:1,
     unknown21:3;
  u8 unknown31:1,
     scanadd:1,
     unknown32:6;
  u8 unknown4;
};

struct name {
  char name[7];
};

#seekto 0x0010;
struct memory channels[128];

#seekto 0x08C0;
struct name names[128];

#seekto 0x2020;
struct memory vfo1;
struct memory vfo2;

ERROR: InvocationError for command /chirp/.tox/driver/bin/python -munittest -vb tests (exited with code 1)
style create: /chirp/.tox/style
style installdeps: pep8==1.6.2, future
style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
style run-test-pre: PYTHONHASHSEED='3850205741'
style run-test: commands[0] | python ./tools/cpep8.py
___________________________________ summary ____________________________________
  unit: commands succeeded
ERROR:   driver: commands failed
  style: commands succeeded
Build step 'Execute shell' marked build as failure
Email was triggered for: Failure
Sending email for trigger: Failure

More information about the chirp_devel mailing list