[chirp_devel] Python3 Update - Need Help Testing

[Matthew Poletiek]

Hi All,

I've made a lot of progress on getting the latest py3 branch working across
multiple platforms. I'm maintaining all my working changes here for now:
https://github.com/mpoletiek/py3-CHIRP

I've even made a list of supported devices and am marking the ones I've
personally tested:
https://github.com/mpoletiek/py3-CHIRP/blob/main/RADIOS.md

Currently I only own a BF-F8HP so I've marked all the Radios that use that
driver `TESTED`.

I've been playing around with Tox and testing the other drivers that way
too. With a few changes I was able to get it working and run every test
against every driver. A lot of them passed every test just fine, but a lot
of them are failing here and there.

As expected the debug.log is quite long and I figured I'd go through the
drivers one by one that way, but the recommended syntax for doing that
doesn't seem to work as expected.

https://chirp.danplanet.com/projects/chirp/wiki/DevelopersProcess

`tox -e driver -- -d Icom_IC-2820H`

Running this command gives me the following in a Python3.7 environment:

`ERROR: MISSING test execution (tx) nodes: please specify --tx`

When I add '-n 2' or `--tx popen//python=python3.7` to the pytest
command it exits with `code: 5 (no tests run)`

Anyone familiar enough with tox to help me out with this?

There's also a py3driver env setup in the tox.ini file, but that
doesn't work either.

Thanks,

-------------------------------------------
Matthew Poletiek
303.810.9082
matthew.poletiek at gmail.com
www.matthewpoletiek.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20201220/30701ccf/attachment-0001.html