[chirp_devel] Python 3 Status

Wed Aug 12 16:33:13 PDT 2020

Hi Joe,
if you use mercurial you could use that tool to extract a patch file. The
instructions are on the chirp site. If you go through them patiently, you
will get there.
You could zip up your source tree, mount it somewhere, and post the link
here and we can take a look at it.  Alex (next message) did that with a git
site. His changes weren't accepted because something was missing, or need
for driver testing was a pre-requisite. If I recall correctly, the comment
was something about going beyond syntactical changes to satisfy editor/lint
etc and making changes to the drivers one at a time ie 0% to 100% each one,
none left in various partial complete states. Also, when I looked at the
changes, I got confused (easy to do) and gave up choosing the outside, and
never came back.
If you make your work visible it's possible to draw from it when the senior
devs and reviewers have time. I think including a radio download img file
from post patch tests for the radios you test and dont brick would be
helpful. Those could be included for addition to the tree.
If you supply a patch file follow the patch description guideline and tie
it to an issue/ticket by number.
Well, a bit of a ramble but hope it helps. I'm new here but that's what I
have gathered so far.

On Tue, Aug 11, 2020 at 10:55 PM Joe Pizzi via chirp_devel <
chirp_devel at intrepid.danplanet.com> wrote:

> I've fixed those errors, but don't know the right way to provide the fixes.
>
> I also don't know if the new syntax is supported in the old version.
>
> I saw another message that indicated somebody else also made the fixes.
>
> Joe Pizzi
>
> On Tue, Aug 11, 2020, 9:24 PM Jason Vigil via chirp_devel <
> chirp_devel at intrepid.danplanet.com> wrote:
>
>> Hey folks,
>>
>>
>> Does anyone have any information regarding the status of Python 3
>> support? It appears that the `py3` branch has not had any new commits for 6
>> months now. After following the instructions here:
>> https://chirp.danplanet.com/projects/chirp/wiki/Linux_Python3, I see the
>> following errors (on Ubuntu 20.04):
>>
>> ```
>> jason at ubuntu-20:~/workspace/chirp.hg$ python3 chirpw
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ts480:
>> invalid syntax (ts480.py, line 1141)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/kyd:
>> invalid syntax (kyd.py, line 503)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/kguv9dplus:
>> invalid syntax (kguv9dplus.py, line 880)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/th_uv3r:
>> invalid syntax (wouxun.py, line 277)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ts2000:
>> Missing parentheses in call to 'print'. Did you mean print("Bug:
>> unsupported duplex `%s'" % mem.duplex)? (ts2000.py, line 220)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft70:
>> invalid syntax (ft70.py, line 1165)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft450d:
>> invalid syntax (ft450d.py, line 502)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ts590:
>> invalid syntax (ts590.py, line 1647)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/anytone_ht:
>> invalid syntax (anytone_ht.py, line 236)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft1d:
>> invalid syntax (ft1d.py, line 1893)
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/retevis_rt22: invalid syntax
>> (retevis_rt22.py, line 608)
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/baofeng_wp970i: invalid syntax
>> (baofeng_common.py, line 167)
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/baofeng_common: invalid syntax
>> (baofeng_common.py, line 167)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft2800:
>> invalid syntax (ft2800.py, line 204)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/tk760:
>> 'float' object cannot be interpreted as an integer
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/puxing_px888k: can only
>> concatenate list (not "range") to list
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/vxa700:
>> invalid syntax (vxa700.py, line 180)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/th_uv3r25:
>> invalid syntax (wouxun.py, line 277)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ftm350:
>> invalid syntax (ftm350.py, line 281)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft2900:
>> invalid syntax (ft2900.py, line 540)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft60:
>> invalid syntax (ft60.py, line 406)
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/retevis_rt26: invalid syntax
>> (retevis_rt26.py, line 900)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft90:
>> invalid syntax (ft90.py, line 335)
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/radioddity_r2: invalid syntax
>> (radioddity_r2.py, line 614)
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/retevis_rt23: invalid syntax
>> (retevis_rt23.py, line 849)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/vx6:
>> invalid syntax (vx6.py, line 874)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft7100:
>> invalid syntax (ft7100.py, line 571)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/fd268:
>> invalid syntax (fd268.py, line 793)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/th7800:
>> invalid syntax (th7800.py, line 539)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/mursv1:
>> invalid syntax (baofeng_common.py, line 167)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/leixen:
>> invalid syntax (leixen.py, line 264)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/tk760g:
>> invalid syntax (tk760g.py, line 910)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/kguv8dplus:
>> invalid syntax (kguv8dplus.py, line 421)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ts850:
>> 'dict' object has no attribute 'iteritems'
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/th9800:
>> invalid syntax (th9800.py, line 601)
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/baofeng_uv3r: invalid syntax
>> (baofeng_uv3r.py, line 54)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/kyd_IP620:
>> invalid syntax (kyd_IP620.py, line 184)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/thd72:
>> invalid syntax (thd72.py, line 584)
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/retevis_rt21: invalid syntax
>> (retevis_rt21.py, line 564)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft8100:
>> Missing parentheses in call to 'print'. Did you mean print(self.VARIANT,
>> number, tx_freq, mem.freq)? (ft8100.py, line 178)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/gmrsuv1:
>> invalid syntax (baofeng_common.py, line 167)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/bjuv55:
>> invalid syntax (bjuv55.py, line 650)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/thuv1f:
>> invalid syntax (thuv1f.py, line 217)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/bj9900:
>> invalid syntax (bj9900.py, line 181)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/kguv8d:
>> invalid syntax (kguv8d.py, line 379)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/tk270:
>> 'float' object cannot be interpreted as an integer
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/anytone:
>> invalid syntax (anytone.py, line 180)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/th_uv8000:
>> invalid syntax (th_uv8000.py, line 1489)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft2d:
>> invalid syntax (ft1d.py, line 1893)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/alinco:
>> invalid syntax (alinco.py, line 202)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/th9000:
>> invalid syntax (th9000.py, line 355)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/radtel_t18:
>> invalid syntax (radtel_t18.py, line 481)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/uv5x3:
>> invalid syntax (baofeng_common.py, line 167)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ft50:
>> invalid syntax (ft50.py, line 589)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/rfinder:
>> invalid syntax (rfinder.py, line 243)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/vgc:
>> invalid syntax (vgc.py, line 1413)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ap510:
>> invalid syntax (ap510.py, line 383)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/ftm3200d:
>> invalid syntax (ft1d.py, line 1893)
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/retevis_rt1: invalid syntax
>> (retevis_rt1.py, line 729)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/bf-t1:
>> invalid syntax (bf-t1.py, line 228)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/lt725uv:
>> invalid syntax (lt725uv.py, line 1396)
>> Failed to import
>> /home/jason/workspace/chirp.hg/chirp/drivers/tdxone_tdq8a: invalid syntax
>> (tdxone_tdq8a.py, line 304)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/wouxun:
>> invalid syntax (wouxun.py, line 277)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/uv6r:
>> invalid syntax (baofeng_common.py, line 167)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/rh5r_v2:
>> Missing parentheses in call to 'print'. Did you mean print(MEM_FORMAT)?
>> (rh5r_v2.py, line 170)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/kguv8e:
>> invalid syntax (kguv8e.py, line 340)
>> Failed to import /home/jason/workspace/chirp.hg/chirp/drivers/puxing:
>> invalid syntax (puxing.py, line 50)
>> Traceback (most recent call last):
>>   File "chirpw", line 139, in <module>
>>     from chirp.ui import mainapp
>>   File "/home/jason/workspace/chirp.hg/chirp/ui/mainapp.py", line 1140
>>     print query
>>           ^
>> SyntaxError: Missing parentheses in call to 'print'. Did you mean
>> print(query)?
>> ```
>>
>>
>> Thanks,
>> Jason
>> _______________________________________________
>> chirp_devel mailing list
>> chirp_devel at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
>> Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
>
> _______________________________________________
> chirp_devel mailing list
> chirp_devel at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
> Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20200812/0673378f/attachment-0001.html 