[chirp_devel] Run_Tests errors

[Rick DeWitt AA0RD]

I am getting the following error from BruteForce testing-
Failed to validate Memory 0: 2.400000/0.600000 LSB () r88.5  c88.5 d023 
NN [5.00]: ['Frequency 2.400000 is out of supported range']
Failed to validate Memory 0: 2.400000/0.600000 USB () r88.5  c88.5 d023 
NN [5.00]: ['Frequency 2.400000 is out of supported range']
Failed to validate Memory 0: 2.400000/0.600000 CW () r88.5  c88.5 d023 
NN [5.00]: ['Frequency 2.400000 is out of supported range']
Failed to validate Memory 0: 2.400000/0.600000 FM () r88.5  c88.5 d023 
NN [5.00]: ['Frequency 2.400000 is out of supported range']
Failed to validate Memory 0: 2.400000/0.600000 AM () r88.5  c88.5 d023 
NN [5.00]: ['Frequency 2.400000 is out of supported range']
Failed to validate Memory 0: 2.400000/0.600000 FSK () r88.5  c88.5 d023 
NN [5.00]: ['Frequency 2.400000 is out of supported range']
Failed to validate Memory 0: 2.400000/0.600000 CW-R () r88.5  c88.5 d023 
NN [5.00]: ['Frequency 2.400000 is out of supported range']
Failed to validate Memory 0: 2.400000/0.600000 FSK-R () r88.5 c88.5  
d023 NN [5.00]: ['Frequency 2.400000 is out of supported range']
Failed to validate Memory 0: 2.400000/0.600000 Data+LSB () r88.5 c88.5  
d023 NN [5.00]: ['Frequency 2.400000 is out of supported range']
Failed to validate Memory 0: 2.400000/0.600000 Data+USB () r88.5 c88.5  
d023 NN [5.00]: ['Frequency 2.400000 is out of supported range']
Failed to validate Memory 0: 2.400000/0.600000 Data+FM () r88.5 c88.5  
d023 NN [5.00]: ['Frequency 2.400000 is out of supported range']

Where is that 2.4 MHz value coming from? The Valid Bands declaration 
excludes it, so yes, it will fail. My test img file has 3.985 MHz in 
memory channel 0.
This is also causing the Edges test to fail with: "No mutable memory 
locations found"

-- 
Rick DeWitt
AA0RD
Sequim, Washington, USA 98382
(360) 681-3494