[chirp_devel] Build test results: Still Failing
Build System
Wed Dec 4 13:31:12 PST 2019
Tested changes:
Changes for Build #848
[Andrew Jorgensen <andrew at jorgensenfamily.us>] [frs/gmrs] 2017 rule changes Fixes #5753
This adds the additional FRS channels (15-22) and expands GMRS channels include
all frequencies add in the 2017 rule changes.
It also adds the GMRS repeater channels with the prescribed +5.0MHz offset
(though you'll have to find the correct tones for your local GMRS repeaters).
After some feedback on the mailing list, I've chosen to number the channels
according to the FRS numbering, rather than try to preserve the obsolete
numbering, and I've chosen to name the GMRS repeater channels with both the
"550" style numbering that's common in repeater naming and the "15R" name that
makes it clear that it's receiving on channel 15.
[Jim Unroe <rock.unroe at gmail.com>] Fix Kenwood TK-370 tuning steps
Also TK-260, TK-270, TK-272, TK-278, TK-360, TK-372 and TK-378
fixes #7199
[Jim Unroe <rock.unroe at gmail.com>] Fix Puxing PX-888K tuning steps
fixes #6887
[Jim Unroe <rock.unroe at gmail.com>] Fix Yaesu FT-4 valid steps
Should also fix FT-25, FT-35 and FT-65.
fixes #6807
[Jim Unroe <rock.unroe at gmail.com>] Fix Radioddity R2 tuning steps
fixes #6743
[Jim Unroe <rock.unroe at gmail.com>] Fix Yaesu FTM-350 tuning steps
fixes #6639
[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281
[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141
[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281
[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292
[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231
[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214
[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117
[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181
[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176
[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172
[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels
[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122
[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166
[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163
[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145
Changes for Build #849
[Dan Smith <dsmith at danplanet.com>] [ftm350] Fix trailing whitespace style issue
Fallout from #6639
[Dan Smith <dsmith at danplanet.com>] [ts590] De-register the TS590 clone mode driver
...which seems to be breaking File->New. This is a band-aid until that
can be investigated and resolved.
#7409
[Tom Hayward <tom at tomh.us>] [id880] Fix typo in charset definition. #281
[Tom Hayward <tom at tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141
[Tom Hayward <tom at tomh.us>] [id880] Support full charset. Fixes #281
[Tom Hayward <tom at tomh.us>] [vx5] Support full charset (ASCII). Fixes #292
[Tom Hayward <tom at tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
[Tom Hayward <tom at tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231
[Tom Hayward <tom at tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
[Dan Smith <dsmith at danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214
[Dan Smith <dsmith at danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117
[Marco Filippi <iz3gme.marco at gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181
[Tom Hayward <tom at tomh.us>] tmd700: allow 8-char names. Fixes #176
[Dan Smith <dsmith at danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172
[David Griffith <dave at 661.org>] Bug #155 fix: VX-7 1.25m power levels
[David Griffith <dave at 661.org>] New INSTALL and README files
Fixes #122
[Tom Hayward <tom at tomh.us>] thd72: only use hardware flow on OS X. Fixes #166
[Marco Filippi <iz3gme.marco at gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163
[Tom Hayward <tom at tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145
Full log:
Started by an SCM change
Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace
[workspace] $ hg showconfig paths.default
[workspace] $ hg pull --rev default
[workspace] $ hg update --clean --rev default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
[workspace] $ hg log --rev . --template {node}
[workspace] $ hg log --rev . --template {rev}
[workspace] $ hg log --rev dd3f5ade08818fd924c14539d0ddedeccff1af5e
[workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune dd3f5ade08818fd924c14539d0ddedeccff1af5e
No emails were triggered.
[workspace] $ /bin/sh -xe /tmp/hudson3487898494255149169.sh
+ hg id
+ cut -d -f 1
+ docker run --rm --env REPO=http://d-rats.com/hg/chirp.hg --env REV=5b19a2a78d9c chirp tox
+ repo=http://d-rats.com/hg/chirp.hg
+ rev=5b19a2a78d9c
+ cd /
+ '[' '!' -d chirp ']'
+ hg clone http://d-rats.com/hg/chirp.hg chirp
requesting all changes
adding changesets
adding manifests
adding file changes
added 3279 changesets with 5251 changes to 590 files (+4 heads)
updating to branch default
394 files updated, 0 files merged, 0 files removed, 0 files unresolved
+ cd chirp
+ '[' 5b19a2a78d9c ']'
+ hg pull http://d-rats.com/hg/chirp.hg
pulling from http://d-rats.com/hg/chirp.hg
searching for changes
no changes found
+ hg checkout 5b19a2a78d9c
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+ tox
GLOB sdist-make: /chirp/setup.py
unit create: /chirp/.tox/unit
unit installdeps: nose, mox, mock, future
unit inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
unit installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,funcsigs==1.0.2,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,mock==3.0.5,mox==0.5.3,nose==1.3.7,packaging==19.0,pathlib2==2.3.4,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
unit run-test-pre: PYTHONHASHSEED='223567555'
unit run-test: commands[0] | nosetests -v tests/unit
test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok
test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok
test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok
test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok
test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok
test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok
test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok
test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok
test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok
test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok
test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok
test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok
test_load_mmap_bad_metadata (tests.unit.test_chirp_common.TestImageMetadata) ... ok
test_load_mmap_no_metadata (tests.unit.test_chirp_common.TestImageMetadata) ... ok
test_load_mmap_saves_metadata_on_radio (tests.unit.test_chirp_common.TestImageMetadata) ... ok
test_make_metadata (tests.unit.test_chirp_common.TestImageMetadata) ... ok
test_save_mmap_includes_metadata (tests.unit.test_chirp_common.TestImageMetadata) ... ok
test_save_mmap_no_metadata_not_img_file (tests.unit.test_chirp_common.TestImageMetadata) ... ok
test_strip_metadata (tests.unit.test_chirp_common.TestImageMetadata) ... ok
split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok
test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok
test_compare_version_to_current (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_compare_version_to_current_dev (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok
test_detect_with_metadata_alias_class (tests.unit.test_directory.TestDirectory) ... ok
test_detect_with_metadata_base_class (tests.unit.test_directory.TestDirectory) ... ok
test_detect_with_no_metadata (tests.unit.test_directory.TestDirectory) ... ok
test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok
test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok
test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok
test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok
test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok
test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok
test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok
test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok
test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok
test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok
test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok
test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok
test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok
test_init (tests.unit.test_platform.Win32PlatformTest) ... ok
test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok
test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok
test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok
test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok
test_changed (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok
test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok
test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok
test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
----------------------------------------------------------------------
Ran 163 tests in 0.091s
OK
unit run-test: commands[1] | python ./share/make_supported.py /dev/null
driver create: /chirp/.tox/driver
driver installdeps: future
driver inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
driver installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
driver run-test-pre: PYTHONHASHSEED='223567555'
driver run-test: commands[0] | python -munittest -vb tests
tests (unittest.loader.LoadTestsFailure) ... ERROR
======================================================================
ERROR: tests (unittest.loader.LoadTestsFailure)
----------------------------------------------------------------------
Exception: Unknown radio type `Kenwood_TS-590SG_CloneMode'
----------------------------------------------------------------------
Ran 1 test in 0.000s
FAILED (errors=1)
#seekto 0x0100;
struct {
char sw_name[7];
char sw_ver[5];
u8 unknown1[4];
char sw_key[12];
u8 unknown2[4];
char model[5];
u8 unknown3[11];
} header;
#seekto 0x0140;
struct {
// 0x0140
u8 unknown1;
u8 sublcd;
u8 unknown2[30];
// 0x0160
char pon_msgtext[12];
u8 min_volume;
u8 max_volume;
u8 lo_volume;
u8 hi_volume;
// 0x0170
u8 tone_volume_offset;
u8 poweron_tone;
u8 control_tone;
u8 warning_tone;
u8 alert_tone;
u8 sidetone;
u8 locator_tone;
u8 unknown3[2];
u8 ignition_mode;
u8 ignition_time; // In tens of minutes (6 = 1h)
u8 micsense;
ul16 modereset;
u8 min_vol_preset;
u8 unknown4;
// 0x0180
u8 unknown5[16];
// 0x0190
u8 unknown6[3];
u8 pon_msgtype;
u8 unknown7[8];
u8 unknown8_1:2,
ssi:1,
busy_led:1,
power_switch_memory:1,
scrambler_memory:1,
unknown8_2:1,
off_hook_decode:1;
u8 unknown9_1:5,
clockfmt:1,
datefmt:1,
ignition_sense:1;
u8 unknownA[2];
// 0x01A0
u8 unknownB[8];
u8 ptt_timer;
u8 unknownB2[3];
u8 ptt_proceed:1,
unknownC_1:3,
tone_off:1,
ost_memory:1,
unknownC_2:1,
ptt_release:1;
u8 unknownD[3];
} settings;
#seekto 0x01E0;
struct {
char name[12];
ul16 rxtone;
ul16 txtone;
} ost_tones[40];
#seekto 0x0A00;
ul16 zone_starts[128];
struct zoneinfo {
u8 number;
u8 zonetype;
u8 unknown1[2];
u8 count;
char name[12];
u8 unknown2[2];
ul16 timeout; // 15-1200
ul16 tot_alert; // 10
ul16 tot_rekey; // 60
ul16 tot_reset; // 15
u8 unknown3[3];
u8 unknown21:2,
bcl_override:1,
unknown22:5;
u8 unknown5;
};
struct memory {
u8 number;
lbcd rx_freq[4];
lbcd tx_freq[4];
u8 unknown1[2];
ul16 rx_tone;
ul16 tx_tone;
char name[12];
u8 unknown2[19];
u8 unknown3_1:4,
highpower:1,
unknown3_2:1,
wide:1,
unknown3_3:1;
u8 unknown4;
};
#seekto 0xC570; // Fixme
u8 skipflags[64];
#seekto 0xb00;
struct {
struct zoneinfo zoneinfo;
struct memory memories[2];
} zone0;
ERROR: InvocationError for command /chirp/.tox/driver/bin/python -munittest -vb tests (exited with code 1)
style create: /chirp/.tox/style
style installdeps: pep8==1.6.2, future
style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
style run-test-pre: PYTHONHASHSEED='223567555'
style run-test: commands[0] | python ./tools/cpep8.py
___________________________________ summary ____________________________________
unit: commands succeeded
ERROR: driver: commands failed
style: commands succeeded
Build step 'Execute shell' marked build as failure
Email was triggered for: Failure
Sending email for trigger: Failure
More information about the chirp_devel
mailing list