[chirp_devel] adding FT-65 support, devloping on mac

[Klaus Ruebsam]

Hi,

I use DSlogic for sniffing signals. The device gets connected to the 
machine by means of USB and comes with support for various platforms, 
including Mac: d https://www.dreamsourcelab.com/download/

Bought the logic analyzer at AliExpresss for about 60 Eur. And it works 
really great. It even automatically decodes well-known protocols. Had TX 
connected to one of the sixteen DSlogic ports and RX to another port of 
the DSlogic. By applying the logic analyzer to the usage of the original 
software (for the radio) it really was a piece of cake to figure out the 
required protocol to be used in order to write a working driver. Did so 
for the Radioddity R2.

Good luck!

vy 73 de dg5eau

BTW: I think the software for the DSlogic is even opensource (but never 
investigated on that any further).

> ...
> 1) Need a serial port sniffer for mac.  I have a USB protocol analyzer
> but due to the single-byte polling used, I get a capture buffer line
> per byte, which is a lot to wade through. I googled but didn't find
> anything free for OSX.  If there's an open source solution let me
> know, I have built stuff with brew from time to time.
> ...