[chirp_devel] [kguv9dplus] Add support for Wouxon KG-UV9D Plus #3509
Jim Lieb
Wed Dec 5 17:51:46 PST 2018
Updated to fix issues. This should pass the wordwrap. If it busts, I can
resend via another MUA.
I have run run_tests and pycodestyle-2.7 and they are clean.
# HG changeset patch
# User Jim Lieb <lieb at sea-troll.net>
# Date 1543888193 28800
# Mon Dec 03 17:49:53 2018 -0800
# Node ID 33675c22dcad470b414f2487224f066c5ba04439
# Parent c6cab71d7d7d76b63367f5529a1b2ea075a8db1b
[kguv9dplus] Add support for Wouxon KG-UV9D Plus
Issue: #3509
Adds support for Wouxon KG-UV9d Plus model available from Powerwerx
Passes run_tests and pycodestyle-2.7
This supports all functions relative to the Wouxon/Powerwerx configuration
app with the following exceptions:
1. Scanning CTCSS/DCS (menu 51) is only available on the radio. It appears
to be in volatile memory and gets reset to default (CTCSS) on power cycle.
The supplied app doesn't support it either.
2. DTMF Transmit Interval is on the configuration tab and seems to operate
on the supplied app but it does not appear to be written to the radio.
As a result, it is not in the memory map and doesn't appear at all in
this driver.
3. The supplied app fills in '0's to the right of either the menu or reset
password UI fields. The Chirp UI doesn't seem to support field writeback so
a less than 6 digit password has trailing blanks. However, the full '0'
padded
password is correctly uploaded to radio. Re-downloading the radio will show
the
filled out field correctly. For example, a password of '1234' is actually
sent
to the radio as '123400'.
4. Some tabs (Call ids in partiicular) would be better presented as a three
column
table.
Signed-off-by: Jim Lieb <lieb at sea-troll.net>
diff -r c6cab71d7d7d -r 33675c22dcad chirp/drivers/kguv9dplus.py
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/chirp/drivers/kguv9dplus.py Mon Dec 03 17:49:53 2018 -0800
@@ -0,0 +1,1890 @@
+# Copyright 2018 Jim Lieb <lieb at sea-troll.net>
+#
+# Driver for Wouxon KG-UV9D Plus
+#
+# Borrowed from other chirp drivers, especially the KG-UV8D Plus
+# by Krystian Struzik <toner_82 at tlen.pl>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+"""Wouxun KG-UV9D Plus radio management module"""
+
+import time
+import os
+import logging
+import struct
+import string
+from chirp import util, chirp_common, bitwise, memmap, errors, directory
+from chirp.settings import RadioSetting, RadioSettingValue, \
+ RadioSettingGroup, \
+ RadioSettingValueBoolean, RadioSettingValueList, \
+ RadioSettingValueInteger, RadioSettingValueString, \
+ RadioSettings, InvalidValueError
+
+LOG = logging.getLogger(__name__)
+
+CMD_IDENT = 0x80
+CMD_HANGUP = 0x81
+CMD_RCONF = 0x82
+CMD_WCONF = 0x83
+CMD_RCHAN = 0x84
+CMD_WCHAN = 0x85
+
+cmd_name = {
+ CMD_IDENT: "ident",
+ CMD_HANGUP: "hangup",
+ CMD_RCONF: "read config",
+ CMD_WCONF: "write config",
+ CMD_RCHAN: "read channel memory", # Unused
+ CMD_WCHAN: "write channel memory" # Unused because it is a hack.
+ }
+
+# This is used to write the configuration of the radio base on info
+# gleaned from the downloaded app. There are empty spaces and we honor
+# them because we don't know what they are (yet) although we read the
+# whole of memory.
+#
+# Channel memory is separate. There are 1000 (1-999) channels.
+# These are read/written to the radio in 4 channel (96 byte)
+# records starting at address 0xa00 and ending at
+# 0x4800 (presuming the end of channel 1000 is 0x4860-1
+
+config_map = ( # map address, write size, write count
+ (0x40, 16, 1), # Passwords
+ (0x740, 40, 1), # FM chan 1-20
+ (0x780, 16, 1), # vfo-b-150
+ (0x790, 16, 1), # vfo-b-450
+ (0x800, 16, 1), # vfo-a-150
+ (0x810, 16, 1), # vfo-a-450
+ (0x820, 16, 1), # vfo-a-300
+ (0x830, 16, 1), # vfo-a-700
+ (0x840, 16, 1), # vfo-a-200
+ (0x860, 16, 1), # area-a-conf
+ (0x870, 16, 1), # area-b-conf
+ (0x880, 16, 1), # radio conf 0
+ (0x890, 16, 1), # radio conf 1
+ (0x8a0, 16, 1), # radio conf 2
+ (0x8b0, 16, 1), # radio conf 3
+ (0x8c0, 16, 1), # PTT-ANI
+ (0x8d0, 16, 1), # SCC
+ (0x8e0, 16, 1), # power save
+ (0x8f0, 16, 1), # Display banner
+ (0x940, 64, 2), # Scan groups and names
+ (0xa00, 64, 249), # Memory Channels 1-996
+ (0x4840, 48, 1), # Memory Channels 997-999
+ (0x4900, 32, 249), # Memory Names 1-996
+ (0x6820, 24, 1), # Memory Names 997-999
+ (0x7400, 64, 5), # CALL-ID 1-20, names 1-20
+ )
+
+
+MEM_VALID = 0xfc
+MEM_INVALID = 0xff
+
+# Radio memory map. This matches the reads/writes above.
+# structure elements whose name starts with x are currently unidentified
+
+_MEM_FORMAT02 = """
+#seekto 0x40;
+
+struct {
+ char reset[6];
+ char x46[2];
+ char mode_sw[6];
+ char x4e;
+} passwords;
+
+#seekto 0x740;
+
+struct {
+ u16 fm_freq;
+} fm_chans[20];
+
+// each band has its own configuration, essentially its default params
+
+struct vfo {
+ u32 freq;
+ u32 offset;
+ u16 encqt;
+ u16 decqt;
+ u8 bit7_4:3,
+ qt:3,
+ bit1_0:2;
+ u8 bit7:1,
+ scan:1,
+ bit5:1,
+ pwr:2,
+ mod:1,
+ fm_dev:2;
+ u8 pad2:6,
+ shift:2;
+ u8 zeros;
+};
+
+#seekto 0x780;
+
+struct {
+ struct vfo band_150;
+ struct vfo band_450;
+} vfo_b;
+
+#seekto 0x800;
+
+struct {
+ struct vfo band_150;
+ struct vfo band_450;
+ struct vfo band_300;
+ struct vfo band_700;
+ struct vfo band_200;
+} vfo_a;
+
+// There are two independent radios, aka areas (as described
+// in the manual as the upper and lower portions of the display...
+
+struct area_conf {
+ u8 w_mode;
+ u8 x861;
+ u8 w_chan;
+ u8 scan_grp;
+ u8 bcl;
+ u8 sql;
+ u8 cset;
+ u8 step;
+ u8 scan_mode;
+ u8 x869;
+ u8 scan_range;
+ u8 x86b;
+ u8 x86c;
+ u8 x86d;
+ u8 x86e;
+ u8 x86f;
+};
+
+#seekto 0x860;
+
+struct area_conf a_conf;
+
+#seekto 0x870;
+
+struct area_conf b_conf;
+
+#seekto 0x880;
+
+struct {
+ u8 menu_avail;
+ u8 reset_avail;
+ u8 x882;
+ u8 x883;
+ u8 lang;
+ u8 x885;
+ u8 beep;
+ u8 auto_am;
+ u8 qt_sw;
+ u8 lock;
+ u8 x88a;
+ u8 pf1;
+ u8 pf2;
+ u8 pf3;
+ u8 s_mute;
+ u8 type_set;
+ u8 tot;
+ u8 toa;
+ u8 ptt_id;
+ u8 x893;
+ u8 id_dly;
+ u8 x895;
+ u8 voice_sw;
+ u8 s_tone;
+ u8 abr_lvl;
+ u8 ring_time;
+ u8 roger;
+ u8 x89b;
+ u8 abr;
+ u8 save_m;
+ u8 lock_m;
+ u8 auto_lk;
+ u8 rpt_ptt;
+ u8 rpt_spk;
+ u8 rpt_rct;
+ u8 prich_sw;
+ u16 pri_ch;
+ u8 x8a6;
+ u8 x8a7;
+ u8 dtmf_st;
+ u8 dtmf_tx;
+ u8 x8aa;
+ u8 sc_qt;
+ u8 apo_tmr;
+ u8 vox_grd;
+ u8 vox_dly;
+ u8 rpt_kpt;
+ struct {
+ u16 scan_st;
+ u16 scan_end;
+ } a;
+ struct {
+ u16 scan_st;
+ u16 scan_end;
+ } b;
+ u8 x8b8;
+ u8 x8b9;
+ u8 x8ba;
+ u8 ponmsg;
+ u8 blcdsw;
+ u8 bledsw;
+ u8 x8be;
+ u8 x8bf;
+} settings;
+
+
+#seekto 0x8c0;
+struct {
+ u8 code[6];
+ char x8c6[10];
+} my_callid;
+
+#seekto 0x8d0;
+struct {
+ u8 scc[6];
+ char x8d6[10];
+} stun;
+
+#seekto 0x8e0;
+struct {
+ u16 wake;
+ u16 sleep;
+} save[4];
+
+#seekto 0x8f0;
+struct {
+ char banner[16];
+} display;
+
+#seekto 0x940;
+struct {
+ struct {
+ i16 scan_st;
+ i16 scan_end;
+ } addrs[10];
+ u8 x0968[8];
+ struct {
+ char name[8];
+ } names[10];
+} scn_grps;
+
+// this array of structs is marshalled via the R/WCHAN commands
+#seekto 0xa00;
+struct {
+ u32 rxfreq;
+ u32 txfreq;
+ u16 encQT;
+ u16 decQT;
+ u8 bit7_5:3, // all ones
+ qt:3,
+ bit1_0:2;
+ u8 bit7:1,
+ scan:1,
+ bit5:1,
+ pwr:2,
+ mod:1,
+ fm_dev:2;
+ u8 state;
+ u8 c3;
+} chan_blk[999];
+
+// nobody really sees this. It is marshalled with chan_blk
+// in 4 entry chunks
+#seekto 0x4900;
+
+// Tracks with the index of chan_blk[]
+struct {
+ char name[8];
+} chan_name[999];
+
+#seekto 0x7400;
+struct {
+ u8 cid[6];
+ u8 pad[2];
+}call_ids[20];
+
+// This array tracks with the index of call_ids[]
+struct {
+ char name[6];
+ char pad[2];
+} cid_names[20];
+ """
+
+
+# Support for the Wouxun KG-UV9D Plus radio
+# Serial coms are at 19200 baud
+# The data is passed in variable length records
+# Record structure:
+# Offset Usage
+# 0 start of record (\x7d)
+# 1 Command (6 commands, see above)
+# 2 direction (\xff PC-> Radio, \x00 Radio -> PC)
+# 3 length of payload (excluding header/checksum) (n)
+# 4 payload (n bytes)
+# 4+n+1 checksum - byte sum (% 256) of bytes 1 -> 4+n
+#
+# Memory Read Records:
+# the payload is 3 bytes, first 2 are offset (big endian),
+# 3rd is number of bytes to read
+# Memory Write Records:
+# the maximum payload size (from the Wouxun software)
+# seems to be 66 bytes (2 bytes location + 64 bytes data).
+
+def _pkt_encode(op, payload):
+ """Assemble a packet for the radio and encode it for transmission.
+ Yes indeed, the checksum we store is only 4 bits. Why?
+ I suspect it's a bug in the radio firmware guys didn't want to fix,
+ i.e. a typo 0xff -> 0xf..."""
+
+ data = bytearray()
+ data.append(0x7d) # tag that marks the beginning of the packet
+ data.append(op)
+ data.append(0xff) # 0xff is from app to radio
+ # calc checksum from op to end
+ cksum = op + 0xff
+ if (payload):
+ data.append(len(payload))
+ cksum += len(payload)
+ for byte in payload:
+ cksum += byte
+ data.append(byte)
+ else:
+ data.append(0x00)
+ # Yea, this is a 4 bit cksum (also known as a bug)
+ data.append(cksum & 0xf)
+
+ # now obfuscate by an xor starting with first payload byte ^ 0x52
+ # including the trailing cksum.
+ xorbits = 0x52
+ for i, byte in enumerate(data[4:]):
+ xord = xorbits ^ byte
+ data[i + 4] = xord
+ xorbits = xord
+ return(data)
+
+
+def _pkt_decode(data):
+ """Take a packet hot off the wire and decode it into clear text
+ and return the fields. We say <<cleartext>> here because all it
+ turns out to be is annoying obfuscation.
+ This is the inverse of pkt_decode"""
+
+ # we don't care about data[0].
+ # It is always 0x7d and not included in checksum
+ op = data[1]
+ direction = data[2]
+ bytecount = data[3]
+
+ # First un-obfuscate the payload and cksum
+ payload = bytearray()
+ xorbits = 0x52
+ for i, byte in enumerate(data[4:]):
+ payload.append(xorbits ^ byte)
+ xorbits = byte
+
+ # Calculate the checksum starting with the 3 bytes of the header
+ cksum = op + direction + bytecount
+ for byte in payload[:-1]:
+ cksum += byte
+ # yes, a 4 bit cksum to match the encode
+ cksum_match = (cksum & 0xf) == payload[-1]
+ if (not cksum_match):
+ LOG.debug(
+ "Checksum missmatch: %x != %x; " % (cksum, payload[-1]))
+ return (cksum_match, op, payload[:-1])
+
+# UI callbacks to process input for mapping UI fields to memory cells
+
+
+def freq2int(val, min, max):
+ """Convert a frequency as a string to a u32. Units is Hz
+ """
+ _freq = chirp_common.parse_freq(str(val))
+ if _freq > max or _freq < min:
+ raise InvalidValueError("Frequency %s is not with in %s-%s" %
+ (chirp_common.format_freq(_freq),
+ chirp_common.format_freq(min),
+ chirp_common.format_freq(max)))
+ return _freq
+
+
+def int2freq(freq):
+ """
+ Convert a u32 frequency to a string for UI data entry/display
+ This is stored in the radio as units of 10Hz which we compensate to Hz.
+ A value of -1 indicates <no freqency>, i.e. unused channel.
+ """
+ if (int(freq) > 0):
+ f = chirp_common.format_freq(freq)
+ return f
+ else:
+ return ""
+
+
+def freq2short(val, min, max):
+ """Convert a frequency as a string to a u16 which is units of 10KHz
+ """
+ _freq = chirp_common.parse_freq(str(val))
+ if _freq > max or _freq < min:
+ raise InvalidValueError("Frequency %s is not with in %s-%s" %
+ (chirp_common.format_freq(_freq),
+ chirp_common.format_freq(min),
+ chirp_common.format_freq(max)))
+ return _freq/100000 & 0xFFFF
+
+
+def short2freq(freq):
+ """
+ Convert a short frequency to a string for UI data entry/display
+ This is stored in the radio as units of 10KHz which we
+ compensate to Hz.
+ A value of -1 indicates <no frequency>, i.e. unused channel.
+ """
+ if (int(freq) > 0):
+ f = chirp_common.format_freq(freq * 100000)
+ return f
+ else:
+ return ""
+
+
+def tone2short(t):
+ """Convert a string tone or DCS to an encoded u16
+ """
+ tone = str(t)
+ if tone == "----":
+ u16tone = 0x0000
+ elif tone[0] == 'D': # This is a DCS code
+ c = tone[1: -1]
+ code = int(c, 8)
+ if tone[-1] == 'I':
+ code |= 0x4000
+ u16tone = code | 0x8000
+ else: # This is an analog CTCSS
+ u16tone = int(tone[0:-2]+tone[-1]) & 0xffff # strip the '.'
+ return u16tone
+
+
+def short2tone(tone):
+ """ Map a binary CTCSS/DCS to a string name for the tone
+ """
+ if tone == 0 or tone == 0xffff:
+ ret = "----"
+ else:
+ code = tone & 0x3fff
+ if tone & 0x8000: # This is a DCS
+ if tone & 0x4000: # This is an inverse code
+ ret = "D%0.3oI" % code
+ else:
+ ret = "D%0.3oN" % code
+ else: # Just plain old analog CTCSS
+ ret = "%4.1f" % (code / 10.0)
+ return ret
+
+
+def callid2str(cid):
+ """Caller ID per MDC-1200 spec? Must be 3-6 digits (100 - 999999).
+ One digit (binary) per byte, terminated with '0xc'
+ """
+
+ bin2ascii = " 1234567890"
+ cidstr = ""
+ for i in range(0, 6):
+ b = cid[i].get_value()
+ if b == 0xc: # the cid EOL
+ break
+ if b == 0 or b > 0xa:
+ raise InvalidValueError(
+ "Caller ID code has illegal byte 0x%x" % b)
+ cidstr += bin2ascii[b]
+ return cidstr
+
+
+def str2callid(val):
+ """ Convert caller id strings from callid2str.
+ """
+ ascii2bin = "0123456789"
+ s = str(val).strip()
+ if len(s) < 3 or len(s) > 6:
+ raise InvalidValueError(
+ "Caller ID must be at least 3 and no more than 6 digits")
+ if s[0] == '0':
+ raise InvalidValueError(
+ "First digit of a Caller ID cannot be a zero '0'")
+ blk = bytearray()
+ for c in s:
+ if c not in ascii2bin:
+ raise InvalidValueError(
+ "Caller ID must be all digits 0x%x" % c)
+ b = (0xa, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9)[int(c)]
+ blk.append(b)
+ if len(blk) < 6:
+ blk.append(0xc) # EOL a short ID
+ if len(blk) < 6:
+ for i in range(0, (6 - len(blk))):
+ blk.append(0xf0)
+ return blk
+
+
+def digits2str(digits, padding=' ', width=6):
+ """Convert a password or SCC digit string to a string
+ Passwords are expanded to and must be 6 chars. Fill them with '0'
+ """
+
+ bin2ascii = "0123456789"
+ digitsstr = ""
+ for i in range(0, 6):
+ b = digits[i].get_value()
+ if b == 0xc: # the digits EOL
+ break
+ if b >= 0xa:
+ raise InvalidValueError(
+ "Value has illegal byte 0x%x" % ord(b))
+ digitsstr += bin2ascii[b]
+ digitsstr = digitsstr.ljust(width, padding)
+ return digitsstr
+
+
+def str2digits(val):
+ """ Callback for edited strings from digits2str.
+ """
+ ascii2bin = " 0123456789"
+ s = str(val).strip()
+ if len(s) < 3 or len(s) > 6:
+ raise InvalidValueError(
+ "Value must be at least 3 and no more than 6 digits")
+ blk = bytearray()
+ for c in s:
+ if c not in ascii2bin:
+ raise InvalidValueError("Value must be all digits 0x%x" % c)
+ blk.append(int(c))
+ for i in range(len(blk), 6):
+ blk.append(0xc) # EOL a short ID
+ return blk
+
+
+def name2str(name):
+ """ Convert a callid or scan group name to a string
+ Deal with fixed field padding (\0 or \0xff)
+ """
+
+ namestr = ""
+ for i in range(0, len(name)):
+ b = ord(name[i].get_value())
+ if b != 0 and b != 0xff:
+ namestr += chr(b)
+ return namestr
+
+
+def str2name(val, size=6, fillchar='\0', emptyfill='\0'):
+ """ Convert a string to a name. A name is a 6 element bytearray
+ with ascii chars.
+ """
+ val = str(val).rstrip(' \t\r\n\0\0xff')
+ if len(val) == 0:
+ name = "".ljust(size, emptyfill)
+ else:
+ name = val.ljust(size, fillchar)
+ return name
+
+
+def pw2str(pw):
+ """Convert a password string (6 digits) to a string
+ Passwords must be 6 digits. If it is shorter, pad right with '0'
+ """
+ pwstr = ""
+ ascii2bin = "0123456789"
+ for i in range(0, len(pw)):
+ b = pw[i].get_value()
+ if b not in ascii2bin:
+ raise InvalidValueError("Value must be digits 0-9")
+ pwstr += b
+ pwstr = pwstr.ljust(6, '0')
+ return pwstr
+
+
+def str2pw(val):
+ """Store a password from UI to memory obj
+ If we clear the password (make it go away), change the
+ empty string to '000000' since the radio must have *something*
+ Also, fill a < 6 digit pw with 0's
+ """
+ ascii2bin = "0123456789"
+ val = str(val).rstrip(' \t\r\n\0\0xff')
+ if len(val) == 0: # a null password
+ val = "000000"
+ for i in range(0, len(val)):
+ b = val[i]
+ if b not in ascii2bin:
+ raise InvalidValueError("Value must be digits 0-9")
+ if len(val) == 0:
+ pw = "".ljust(6, '\0')
+ else:
+ pw = val.ljust(6, '0')
+ return pw
+
+
+# Helpers to replace python2 things like confused str/byte
+
+def _hex_print(data, addrfmt=None):
+ """Return a hexdump-like encoding of @data
+ We expect data to be a bytearray, not a string.
+ Expanded from borrowed code to use the first 2 bytes as the address
+ per comm packet format.
+ """
+ if addrfmt is None:
+ addrfmt = '%(addr)03i'
+ addr = 0
+ else: # assume first 2 bytes are address
+ a = struct.unpack(">H", data[0:2])
+ addr = a[0]
+ data = data[2:]
+
+ block_size = 16
+
+ lines = (len(data) / block_size)
+ if (len(data) % block_size > 0):
+ lines += 1
+
+ out = ""
+ left = len(data)
+ for block in range(0, lines):
+ addr += block * block_size
+ try:
+ out += addrfmt % locals()
+ except (OverflowError, ValueError, TypeError, KeyError):
+ out += "%03i" % addr
+ out += ': '
+
+ if left < block_size:
+ limit = left
+ else:
+ limit = block_size
+
+ for j in range(0, block_size):
+ if (j < limit):
+ out += "%02x " % data[(block * block_size) + j]
+ else:
+ out += " "
+
+ out += " "
+
+ for j in range(0, block_size):
+
+ if (j < limit):
+ _byte = data[(block * block_size) + j]
+ if _byte >= 0x20 and _byte < 0x7F:
+ out += "%s" % chr(_byte)
+ else:
+ out += "."
+ else:
+ out += " "
+ out += "\n"
+ if (left > block_size):
+ left -= block_size
+
+ return out
+
+
+# Useful UI lists
+STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0, 50.0, 100.0]
+S_TONES = [str(x) for x in [1000, 1450, 1750, 2100]]
+STEP_LIST = [str(x)+"kHz" for x in STEPS]
+ROGER_LIST = ["Off", "Begin", "End", "Both"]
+TIMEOUT_LIST = [str(x) + "s" for x in range(15, 601, 15)]
+TOA_LIST = ["Off"] + ["%ds" % t for t in range(1, 10)]
+BANDWIDTH_LIST = ["Wide", "Narrow"]
+LANGUAGE_LIST = ["English", "Chinese"]
+PF1KEY_LIST = ["OFF", "call id", "r-alarm", "SOS", "SF-TX"]
+PF2KEY_LIST = ["OFF", "Scan", "Second", "lamp", "SDF-DIR", "K-lamp"]
+PF3KEY_LIST = ["OFF", "Call ID", "R-ALARM", "SOS", "SF-TX"]
+WORKMODE_LIST = ["VFO freq", "Channel No.", "Ch. No.+Freq.",
+ "Ch. No.+Name"]
+BACKLIGHT_LIST = ["Off"] + ["%sS" % t for t in range(1, 31)] + \
+ ["Always On"]
+SAVE_MODES = ["Off", "1", "2", "3", "4"]
+LOCK_MODES = ["key-lk", "key+pg", "key+ptt", "all"]
+APO_TIMES = ["Off"] + ["%dm" % t for t in range(15, 151, 15)]
+OFFSET_LIST = ["none", "+", "-"]
+PONMSG_LIST = ["Battery Volts", "Bitmap"]
+SPMUTE_LIST = ["QT", "QT*T", "QT&T"]
+DTMFST_LIST = ["Off", "DT-ST", "ANI-ST", "DT-ANI"]
+DTMF_TIMES = ["%d" % x for x in range(80, 501, 20)]
+PTTID_LIST = ["Off", "Begin", "End", "Both"]
+ID_DLY_LIST = ["%dms" % t for t in range(100, 3001, 100)]
+VOX_GRDS = ["Off"] + ["%dlevel" % l for l in range(1, 11)]
+VOX_DLYS = ["Off"] + ["%ds" % t for t in range(1, 5)]
+RPT_KPTS = ["Off"] + ["%dms" % t for t in range(100, 5001, 100)]
+LIST_1_5 = ["%s" % x for x in range(1, 6)]
+LIST_0_9 = ["%s" % x for x in range(0, 10)]
+LIST_1_20 = ["%s" % x for x in range(1, 21)]
+LIST_OFF_10 = ["Off"] + ["%s" % x for x in range(1, 11)]
+SCANGRP_LIST = ["All"] + ["%s" % x for x in range(1, 11)]
+SCANMODE_LIST = ["TO", "CO", "SE"]
+SCANRANGE_LIST = ["Current band", "freq range", "ALL"]
+SCQT_LIST = ["Decoder", "Encoder", "Both"]
+S_MUTE_LIST = ["off", "rx mute", "tx mute", "r/t mute"]
+POWER_LIST = ["Low", "Med", "High"]
+RPTMODE_LIST = ["Radio", "One direction Repeater",
+ "Two direction repeater"]
+TONE_LIST = ["----"] + ["%s" % str(t) for t in chirp_common.TONES] + \
+ ["D%0.3dN" % dts for dts in chirp_common.DTCS_CODES] + \
+ ["D%0.3dI" % dts for dts in chirp_common.DTCS_CODES]
+
+
+ at directory.register
+class KGUV9DPlusRadio(chirp_common.CloneModeRadio,
+ chirp_common.ExperimentalRadio):
+
+ """Wouxun KG-UV9D Plus"""
+ VENDOR = "Wouxun"
+ MODEL = "KG-UV9D Plus"
+ _model = "KG-UV9D"
+ _rev = "00" # default rev for the radio I know about...
+ _file_ident = "kg-uv9d"
+ BAUD_RATE = 19200
+ POWER_LEVELS = [chirp_common.PowerLevel("L", watts=1),
+ chirp_common.PowerLevel("M", watts=2),
+ chirp_common.PowerLevel("H", watts=5)]
+ _mmap = ""
+
+ def _read_record(self):
+ """ Read and validate the header of a radio reply.
+ A record is a formatted byte stream as follows:
+ 0x7D All records start with this
+ opcode This is in the set of legal commands.
+ The radio reply matches the request
+ dir This is the direction, 0xFF to the radio,
+ 0x00 from the radio.
+ cnt Count of bytes in payload
+ (not including the trailing checksum byte)
+ <cnt bytes>
+ <checksum byte>
+ """
+
+ # first get the header and validate it
+ data = bytearray(self.pipe.read(4))
+ if (len(data) < 4):
+ raise errors.RadioError('Radio did not respond')
+ if (data[0] != 0x7D):
+ raise errors.RadioError(
+ 'Radio reply garbled (%02x)' % data[0])
+ if (data[1] not in cmd_name):
+ raise errors.RadioError(
+ "Unrecognized opcode (%02x)" % data[1])
+ if (data[2] != 0x00):
+ raise errors.RadioError(
+ "Direction incorrect. Got (%02x)" % data[2])
+ payload_len = data[3]
+ # don't forget to read the checksum byte
+ data.extend(self.pipe.read(payload_len + 1))
+ if (len(data) != (payload_len + 5)): # we got a short read
+ raise errors.RadioError(
+ "Radio reply wrong size. Wanted %d, got %d" %
+ ((payload_len + 1), (len(data) - 4)))
+ return _pkt_decode(data)
+
+ def _write_record(self, cmd, payload=None):
+ """ Write a request packet to the radio.
+ """
+
+ packet = _pkt_encode(cmd, payload)
+ self.pipe.write(packet)
+
+ @classmethod
+ def match_model(cls, filedata, filename):
+ """Look for bits in the file image and see if it looks
+ like ours...
+ TODO: there is a bunch of rubbish between 0x50 and 0x160
+ that is still a known unknown
+ """
+ return cls._file_ident in filedata[0x51:0x59].lower()
+
+ def _identify(self):
+ """ Identify the radio
+ The ident block identifies the radio and its capabilities.
+ This block is always 78 bytes. The rev == '01' is the base
+ radio and '02' seems to be the '-Plus' version.
+ I don't really trust the content after the model and revision.
+ One would assume this is pretty much constant data but I have
+ seen differences between my radio and the dump named
+ KG-UV9D-Plus-OutOfBox-Read.txt from bug #3509. The first
+ five bands match the OEM windows
+ app except the 350-400 band. The OOB trace has the 700MHz
+ band different. This is speculation at this point.
+
+ TODO: This could be smarter and reject a radio not actually
+ a UV9D...
+ """
+
+ for _i in range(0, 10): # retry 10 times if we get junk
+ self._write_record(CMD_IDENT)
+ chksum_match, op, _resp = self._read_record()
+ if len(_resp) == 0:
+ raise Exception("Radio not responding")
+ if len(_resp) != 74:
+ LOG.error(
+ "Expected and IDENT reply of 78 bytes. Got (%d)" %
+ len(_resp))
+ continue
+ if not chksum_match:
+ LOG.error("Checksum error: retrying ident...")
+ time.sleep(0.100)
+ continue
+ if op != CMD_IDENT:
+ LOG.error("Expected IDENT reply. Got (%02x)" % op)
+ continue
+ LOG.debug("Got:\n%s" % _hex_print(_resp))
+ (mod, rev) = struct.unpack(">7s2s", _resp[0:9])
+ LOG.debug("Model %s, rev %s" % (mod, rev))
+ if mod == self._model:
+ self._rev = rev
+ return
+ else:
+ raise Exception("Unable to identify radio")
+ raise Exception("All retries to identify failed")
+
+ def process_mmap(self):
+ if self._rev == "02" or self._rev == "00":
+ self._memobj = bitwise.parse(_MEM_FORMAT02, self._mmap)
+ else: # this is where you elif the other variants and non-Plus
radios
+ raise errors.RadioError(
+ "Unrecognized model variation (%s). No memory map for it" %
+ self._rev)
+
+ def sync_in(self):
+ """ Public sync_in
+ Download contents of the radio. Throw errors back
+ to the core if the radio does not respond.
+ """
+ try:
+ self._identify()
+ self._mmap = self._do_download()
+ self._write_record(CMD_HANGUP)
+ except errors.RadioError:
+ raise
+ except Exception, e:
+ LOG.exception('Unknown error during download process')
+ raise errors.RadioError(
+ "Failed to communicate with radio: %s" % e)
+ self.process_mmap()
+
+ def sync_out(self):
+ """ Public sync_out
+ Upload the modified memory image into the radio.
+ """
+
+ try:
+ self._identify()
+ self._do_upload()
+ self._write_record(CMD_HANGUP)
+ except errors.RadioError:
+ raise
+ except Exception, e:
+ raise errors.RadioError(
+ "Failed to communicate with radio: %s" % e)
+ return
+
+ def _do_download(self):
+ """ Read the whole of radio memory in 64 byte chunks.
+ We load the config space followed by loading memory channels.
+ The radio seems to be a "clone" type and the memory channels
+ are actually within the config space. There are separate
+ commands (CMD_RCHAN, CMD_WCHAN) for reading channel memory but
+ these seem to be a hack that can only do 4 channels at a time.
+ Since the radio only supports 999, (can only support 3 chars
+ in the display UI?) although the vendors app reads 1000
+ channels, it hacks back to config writes (CMD_WCONF) for the
+ last 3 channels and names. We keep it simple and just read
+ the whole thing even though the vendor app doesn't. Channels
+ are separate in their app simply because the radio protocol
+ has read/write commands to access it. What they do is simply
+ marshal the frequency+mode bits in 4 channel chunks followed
+ by a separate chunk of for names. In config space, they are two
+ separate arrays 1..999. Given that this space is not a
+ multiple of 4, there is hackery on upload to do the writes to
+ config space. See upload for this.
+ """
+
+ mem = bytearray(0x8000) # The radio's memory map is 32k
+ for addr in range(0, 0x8000, 64):
+ req = bytearray(struct.pack(">HB", addr, 64))
+ self._write_record(CMD_RCONF, req)
+ chksum_match, op, resp = self._read_record()
+ if not chksum_match:
+ LOG.debug(_hex_print(resp))
+ raise Exception(
+ "Checksum error while reading configuration (0x%x)" %
+ addr)
+ pa = struct.unpack(">H", resp[0:2])
+ pkt_addr = pa[0]
+ payload = resp[2:]
+ if op != CMD_RCONF or addr != pkt_addr:
+ raise Exception(
+ "Expected CMD_RCONF (%x) reply. Got (%02x: %x)" %
+ (addr, op, pkt_addr))
+ LOG.debug("Config read (0x%x):\n%s" %
+ (addr, _hex_print(resp, '0x%(addr)04x')))
+ for i in range(0, len(payload) - 1):
+ mem[addr + i] = payload[i]
+ if self.status_fn:
+ status = chirp_common.Status()
+ status.cur = addr
+ status.max = 0x8000
+ status.msg = "Cloning from radio"
+ self.status_fn(status)
+ strmem = "".join([chr(x) for x in mem])
+ return memmap.MemoryMap(strmem)
+
+ def _do_upload(self):
+ """Walk through the config map and write updated records to
+ the radio. The config map contains only the regions we know
+ about. We don't use the channel memory commands to avoid the
+ hackery of using config write commands to fill in the last
+ 3 channel memory and names slots. As we discover other useful
+ goodies in the map, we can add more slots...
+ """
+ for ar, size, count in config_map:
+ for addr in range(ar, ar + (size*count), size):
+ req = bytearray(struct.pack(">H", addr))
+ req.extend(self.get_mmap()[addr:addr + size])
+ self._write_record(CMD_WCONF, req)
+ LOG.debug("Config write (0x%x):\n%s" %
+ (addr, _hex_print(req)))
+ chksum_match, op, ack = self._read_record()
+ LOG.debug("Config write ack [%x]\n%s" %
+ (addr, _hex_print(ack)))
+ a = struct.unpack(">H", ack) # big endian short...
+ ack = a[0]
+ if not chksum_match or op != CMD_WCONF or addr != ack:
+ msg = ""
+ if not chksum_match:
+ msg += "Checksum err, "
+ if op != CMD_WCONF:
+ msg += "cmd mismatch %x != %x, " % \
+ (op, CMD_WCONF)
+ if addr != ack:
+ msg += "ack error %x != %x, " % (addr, ack)
+ raise Exception("Radio did not ack block: %s error" %
msg)
+ if self.status_fn:
+ status = chirp_common.Status()
+ status.cur = addr
+ status.max = 0x8000
+ status.msg = "Update radio"
+ self.status_fn(status)
+
+ def get_features(self):
+ """ Public get_features
+ Return the features of this radio once we have identified
+ it and gotten its bits
+ """
+ rf = chirp_common.RadioFeatures()
+ rf.has_settings = True
+ rf.has_ctone = True
+ rf.has_rx_dtcs = True
+ rf.has_cross = True
+ rf.has_tuning_step = False
+ rf.has_bank = False
+ rf.can_odd_split = True
+ rf.valid_skips = ["", "S"]
+ rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
+ rf.valid_cross_modes = [
+ "Tone->Tone",
+ "Tone->DTCS",
+ "DTCS->Tone",
+ "DTCS->",
+ "->Tone",
+ "->DTCS",
+ "DTCS->DTCS",
+ ]
+ rf.valid_modes = ["FM", "NFM", "AM"]
+ rf.valid_power_levels = self.POWER_LEVELS
+ rf.valid_name_length = 8
+ rf.valid_duplexes = ["", "-", "+", "split", "off"]
+ rf.valid_bands = [(108000000, 136000000), # Aircraft AM
+ (136000000, 180000000), # supports 2m
+ (230000000, 250000000),
+ (350000000, 400000000),
+ (400000000, 520000000), # supports 70cm
+ (700000000, 985000000)]
+ rf.valid_characters = chirp_common.CHARSET_ASCII
+ rf.memory_bounds = (1, 999) # 999 memories
+ return rf
+
+ @classmethod
+ def get_prompts(cls):
+ rp = chirp_common.RadioPrompts()
+ rp.experimental = ("This radio driver is currently under development.
"
+ "There are no known issues with it, but you should
"
+ "proceed with caution.")
+ return rp
+
+ def get_raw_memory(self, number):
+ return repr(self._memobj.chan_blk[number])
+
+ def _get_tone(self, _mem, mem):
+ """Decode both the encode and decode CTSS/DCS codes from
+ the memory channel and stuff them into the UI
+ memory channel row.
+ """
+ txtone = short2tone(_mem.encQT)
+ rxtone = short2tone(_mem.decQT)
+ pt = "N"
+ pr = "N"
+
+ if txtone == "----":
+ txmode = ""
+ elif txtone[0] == "D":
+ mem.dtcs = int(txtone[1:4])
+ if txtone[4] == "I":
+ pt = "R"
+ txmode = "DTCS"
+ else:
+ mem.rtone = float(txtone)
+ txmode = "Tone"
+
+ if rxtone == "----":
+ rxmode = ""
+ elif rxtone[0] == "D":
+ mem.rx_dtcs = int(rxtone[1:4])
+ if rxtone[4] == "I":
+ pr = "R"
+ rxmode = "DTCS"
+ else:
+ mem.ctone = float(rxtone)
+ rxmode = "Tone"
+
+ if txmode == "Tone" and len(rxmode) == 0:
+ mem.tmode = "Tone"
+ elif (txmode == rxmode and txmode == "Tone" and
+ mem.rtone == mem.ctone):
+ mem.tmode = "TSQL"
+ elif (txmode == rxmode and txmode == "DTCS" and
+ mem.dtcs == mem.rx_dtcs):
+ mem.tmode = "DTCS"
+ elif (len(rxmode) + len(txmode)) > 0:
+ mem.tmode = "Cross"
+ mem.cross_mode = "%s->%s" % (txmode, rxmode)
+
+ mem.dtcs_polarity = pt + pr
+
+ LOG.debug("_get_tone: Got TX %s (%i) RX %s (%i)" %
+ (txmode, _mem.encQT, rxmode, _mem.decQT))
+
+ def get_memory(self, number):
+ """ Public get_memory
+ Return the channel memory referenced by number to the UI.
+ """
+ _mem = self._memobj.chan_blk[number - 1]
+ _nam = self._memobj.chan_name[number - 1]
+
+ mem = chirp_common.Memory()
+ mem.number = number
+ _valid = _mem.state
+ if _valid != MEM_VALID:
+ mem.empty = True
+ return mem
+ else:
+ mem.empty = False
+
+ mem.freq = int(_mem.rxfreq) * 10
+
+ if _mem.txfreq == 0xFFFFFFFF:
+ # TX freq not set
+ mem.duplex = "off"
+ mem.offset = 0
+ elif int(_mem.rxfreq) == int(_mem.txfreq):
+ mem.duplex = ""
+ mem.offset = 0
+ elif abs(int(_mem.rxfreq) * 10 - int(_mem.txfreq) * 10) > 70000000:
+ mem.duplex = "split"
+ mem.offset = int(_mem.txfreq) * 10
+ else:
+ mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+"
+ mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10
+
+ mem.name = name2str(_nam.name)
+
+ self._get_tone(_mem, mem)
+
+ mem.skip = "" if bool(_mem.scan) else "S"
+
+ mem.power = self.POWER_LEVELS[_mem.pwr]
+ if _mem.mod == 1:
+ mem.mode = "AM"
+ elif _mem.fm_dev == 0:
+ mem.mode = "FM"
+ else:
+ mem.mode = "NFM"
+ # qt has no home in the UI
+ return mem
+
+ def _set_tone(self, mem, _mem):
+ """Update the memory channel block CTCC/DCS tones
+ from the UI fields
+ """
+ def _set_dcs(code, pol):
+ val = int("%i" % code, 8) | 0x8000
+ if pol == "R":
+ val |= 0x4000
+ return val
+
+ rx_mode = tx_mode = None
+ rxtone = txtone = 0x0000
+
+ if mem.tmode == "Tone":
+ tx_mode = "Tone"
+ txtone = int(mem.rtone * 10)
+ elif mem.tmode == "TSQL":
+ rx_mode = tx_mode = "Tone"
+ rxtone = txtone = int(mem.ctone * 10)
+ elif mem.tmode == "DTCS":
+ tx_mode = rx_mode = "DTCS"
+ txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0])
+ rxtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[1])
+ elif mem.tmode == "Cross":
+ tx_mode, rx_mode = mem.cross_mode.split("->")
+ if tx_mode == "DTCS":
+ txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0])
+ elif tx_mode == "Tone":
+ txtone = int(mem.rtone * 10)
+ if rx_mode == "DTCS":
+ rxtone = _set_dcs(mem.rx_dtcs, mem.dtcs_polarity[1])
+ elif rx_mode == "Tone":
+ rxtone = int(mem.ctone * 10)
+
+ _mem.decQT = rxtone
+ _mem.encQT = txtone
+
+ LOG.debug("Set TX %s (%i) RX %s (%i)" %
+ (tx_mode, _mem.encQT, rx_mode, _mem.decQT))
+
+ def set_memory(self, mem):
+ """ Public set_memory
+ Inverse of get_memory. Update the radio memory image
+ from the mem object
+ """
+ number = mem.number
+
+ _mem = self._memobj.chan_blk[number - 1]
+ _nam = self._memobj.chan_name[number - 1]
+
+ if mem.empty:
+ _mem.set_raw("\xFF" * (_mem.size() / 8))
+ _nam.name = str2name("", 8, '\0', '\0')
+ _mem.state = MEM_INVALID
+ return
+
+ _mem.rxfreq = int(mem.freq / 10)
+ if mem.duplex == "off":
+ _mem.txfreq = 0xFFFFFFFF
+ elif mem.duplex == "split":
+ _mem.txfreq = int(mem.offset / 10)
+ elif mem.duplex == "+":
+ _mem.txfreq = int(mem.freq / 10) + int(mem.offset / 10)
+ elif mem.duplex == "-":
+ _mem.txfreq = int(mem.freq / 10) - int(mem.offset / 10)
+ else:
+ _mem.txfreq = int(mem.freq / 10)
+ _mem.scan = int(mem.skip != "S")
+ if mem.mode == "FM":
+ _mem.mod = 0 # make sure forced AM is off
+ _mem.fm_dev = 0
+ elif mem.mode == "NFM":
+ _mem.mod = 0
+ _mem.fm_dev = 1
+ elif mem.mode == "AM":
+ _mem.mod = 1 # AM on
+ _mem.fm_dev = 1 # set NFM bandwidth
+ else:
+ _mem.mod = 0
+ _mem.fm_dev = 0 # Catchall default is FM
+ # set the tone
+ self._set_tone(mem, _mem)
+ # set the power
+ if mem.power:
+ _mem.pwr = self.POWER_LEVELS.index(mem.power)
+ else:
+ _mem.pwr = True
+
+ # Set fields we can't access via the UI table to safe defaults
+ _mem.qt = 0 # mute mode to QT
+
+ _nam.name = str2name(mem.name, 8, '\0', '\0')
+ _mem.state = MEM_VALID
+
+# Build the UI configuration tabs
+# the channel memory tab is built by the core.
+# We have no control over it
+
+ def _core_tab(self):
+ """ Build Core Configuration tab
+ Radio settings common to all modes and areas go here.
+ """
+ s = self._memobj.settings
+
+ cf = RadioSettingGroup("cfg_grp", "Configuration")
+
+ cf.append(RadioSetting("auto_am",
+ "Auto detect AM(53)",
+ RadioSettingValueBoolean(s.auto_am)))
+ cf.append(RadioSetting("qt_sw",
+ "Scan tone detect(59)",
+ RadioSettingValueBoolean(s.qt_sw)))
+ cf.append(
+ RadioSetting("s_mute",
+ "SubFreq Mute(60)",
+ RadioSettingValueList(S_MUTE_LIST,
+ S_MUTE_LIST[s.s_mute])))
+ cf.append(
+ RadioSetting("tot",
+ "Transmit timeout Timer(10)",
+ RadioSettingValueList(TIMEOUT_LIST,
+ TIMEOUT_LIST[s.tot])))
+ cf.append(
+ RadioSetting("toa",
+ "Transmit Timeout Alarm(11)",
+ RadioSettingValueList(TOA_LIST,
+ TOA_LIST[s.toa])))
+ cf.append(
+ RadioSetting("ptt_id",
+ "PTT Caller ID mode(23)",
+ RadioSettingValueList(PTTID_LIST,
+ PTTID_LIST[s.ptt_id])))
+ cf.append(
+ RadioSetting("id_dly",
+ "Caller ID Delay time(25)",
+ RadioSettingValueList(ID_DLY_LIST,
+ ID_DLY_LIST[s.id_dly])))
+ cf.append(RadioSetting("voice_sw",
+ "Voice Guide(12)",
+ RadioSettingValueBoolean(s.voice_sw)))
+ cf.append(RadioSetting("beep",
+ "Keypad Beep(13)",
+ RadioSettingValueBoolean(s.beep)))
+ cf.append(
+ RadioSetting("s_tone",
+ "Side Tone(36)",
+ RadioSettingValueList(S_TONES,
+ S_TONES[s.s_tone])))
+ cf.append(
+ RadioSetting("ring_time",
+ "Ring Time(26)",
+ RadioSettingValueList(
+ LIST_OFF_10,
+ LIST_OFF_10[s.ring_time])))
+ cf.append(
+ RadioSetting("roger",
+ "Roger Beep(9)",
+ RadioSettingValueList(ROGER_LIST,
+ ROGER_LIST[s.roger])))
+ cf.append(RadioSetting("blcdsw",
+ "Backlight(41)",
+ RadioSettingValueBoolean(s.blcdsw)))
+ cf.append(
+ RadioSetting("abr",
+ "Auto Backlight Time(1)",
+ RadioSettingValueList(BACKLIGHT_LIST,
+ BACKLIGHT_LIST[s.abr])))
+ cf.append(
+ RadioSetting("abr_lvl",
+ "Backlight Brightness(27)",
+ RadioSettingValueList(LIST_1_5,
+ LIST_1_5[s.abr_lvl])))
+ cf.append(RadioSetting("lock",
+ "Keypad Lock",
+ RadioSettingValueBoolean(s.lock)))
+ cf.append(
+ RadioSetting("lock_m",
+ "Keypad Lock Mode(35)",
+ RadioSettingValueList(LOCK_MODES,
+ LOCK_MODES[s.lock_m])))
+ cf.append(RadioSetting("auto_lk",
+ "Keypad Autolock(34)",
+ RadioSettingValueBoolean(s.auto_lk)))
+ cf.append(RadioSetting("prich_sw",
+ "Priority Channel Scan(33)",
+ RadioSettingValueBoolean(s.prich_sw)))
+ cf.append(RadioSetting("pri_ch",
+ "Priority Channel(32)",
+ RadioSettingValueInteger(1, 999,
+ s.pri_ch)))
+ cf.append(
+ RadioSetting("dtmf_st",
+ "DTMF Sidetone(22)",
+ RadioSettingValueList(DTMFST_LIST,
+ DTMFST_LIST[s.dtmf_st])))
+ cf.append(RadioSetting("sc_qt",
+ "Scan QT Save Mode(38)",
+ RadioSettingValueList(
+ SCQT_LIST,
+ SCQT_LIST[s.sc_qt])))
+ cf.append(
+ RadioSetting("apo_tmr",
+ "Automatic Power-off(39)",
+ RadioSettingValueList(APO_TIMES,
+ APO_TIMES[s.apo_tmr])))
+ cf.append( # VOX "guard" is really VOX trigger audio level
+ RadioSetting("vox_grd",
+ "VOX level(7)",
+ RadioSettingValueList(VOX_GRDS,
+ VOX_GRDS[s.vox_grd])))
+ cf.append(
+ RadioSetting("vox_dly",
+ "VOX Delay(37)",
+ RadioSettingValueList(VOX_DLYS,
+ VOX_DLYS[s.vox_dly])))
+ cf.append(
+ RadioSetting("lang",
+ "Menu Language(14)",
+ RadioSettingValueList(LANGUAGE_LIST,
+ LANGUAGE_LIST[s.lang])))
+ cf.append(RadioSetting("ponmsg",
+ "Poweron message(40)",
+ RadioSettingValueList(
+ PONMSG_LIST, PONMSG_LIST[s.ponmsg])))
+ cf.append(RadioSetting("bledsw",
+ "Receive LED(42)",
+ RadioSettingValueBoolean(s.bledsw)))
+ return cf
+
+ def _repeater_tab(self):
+ """Repeater mode functions
+ """
+ s = self._memobj.settings
+ cf = RadioSettingGroup("repeater", "Repeater Functions")
+
+ cf.append(
+ RadioSetting("type_set",
+ "Radio Mode(43)",
+ RadioSettingValueList(
+ RPTMODE_LIST,
+ RPTMODE_LIST[s.type_set])))
+ cf.append(RadioSetting("rpt_ptt",
+ "Repeater PTT(45)",
+ RadioSettingValueBoolean(s.rpt_ptt)))
+ cf.append(RadioSetting("rpt_spk",
+ "Repeater Mode Speaker(44)",
+ RadioSettingValueBoolean(s.rpt_spk)))
+ cf.append(
+ RadioSetting("rpt_kpt",
+ "Repeater Hold Time(46)",
+ RadioSettingValueList(RPT_KPTS,
+ RPT_KPTS[s.rpt_kpt])))
+ cf.append(RadioSetting("rpt_rct",
+ "Repeater Receipt Tone(47)",
+ RadioSettingValueBoolean(s.rpt_rct)))
+ return cf
+
+ def _admin_tab(self):
+ """Admin functions not present in radio menu...
+ These are admin functions not radio operation configuration
+ """
+
+ def apply_cid(setting, obj):
+ c = str2callid(setting.value)
+ obj.code = c
+
+ def apply_scc(setting, obj):
+ c = str2digits(setting.value)
+ obj.scc = c
+
+ def apply_mode_sw(setting, obj):
+ pw = str2pw(setting.value)
+ obj.mode_sw = pw
+ setting.value = pw2str(obj.mode_sw)
+
+ def apply_reset(setting, obj):
+ pw = str2pw(setting.value)
+ obj.reset = pw
+ setting.value = pw2str(obj.reset)
+
+ def apply_wake(setting, obj):
+ obj.wake = int(setting.value)/10
+
+ def apply_sleep(setting, obj):
+ obj.sleep = int(setting.value)/10
+
+ pw = self._memobj.passwords # admin passwords
+ s = self._memobj.settings
+
+ cf = RadioSettingGroup("admin", "Admin Functions")
+
+ cf.append(RadioSetting("menu_avail",
+ "Menu available in channel mode",
+ RadioSettingValueBoolean(s.menu_avail)))
+ mode_sw = RadioSettingValueString(0, 6,
+ pw2str(pw.mode_sw), False)
+ rs = RadioSetting("passwords.mode_sw",
+ "Mode Switch Password", mode_sw)
+ rs.set_apply_callback(apply_mode_sw, pw)
+ cf.append(rs)
+
+ cf.append(RadioSetting("reset_avail",
+ "Radio Reset Available",
+ RadioSettingValueBoolean(s.reset_avail)))
+ reset = RadioSettingValueString(0, 6, pw2str(pw.reset), False)
+ rs = RadioSetting("passwords.reset",
+ "Radio Reset Password", reset)
+ rs.set_apply_callback(apply_reset, pw)
+ cf.append(rs)
+
+ cf.append(
+ RadioSetting("dtmf_tx",
+ "DTMF Tx Duration",
+ RadioSettingValueList(DTMF_TIMES,
+ DTMF_TIMES[s.dtmf_tx])))
+ cid = self._memobj.my_callid
+ my_callid = RadioSettingValueString(3, 6,
+ callid2str(cid.code), False)
+ rs = RadioSetting("my_callid.code",
+ "PTT Caller ID code(24)", my_callid)
+ rs.set_apply_callback(apply_cid, cid)
+ cf.append(rs)
+
+ stun = self._memobj.stun
+ st = RadioSettingValueString(0, 6, digits2str(stun.scc), False)
+ rs = RadioSetting("stun.scc", "Security code", st)
+ rs.set_apply_callback(apply_scc, stun)
+ cf.append(rs)
+
+ cf.append(
+ RadioSetting("settings.save_m",
+ "Save Mode (2)",
+ RadioSettingValueList(SAVE_MODES,
+ SAVE_MODES[s.save_m])))
+ for i in range(0, 4):
+ sm = self._memobj.save[i]
+ wake = RadioSettingValueInteger(0, 18000, sm.wake * 10, 1)
+ wf = RadioSetting("save[%i].wake" % i,
+ "Save Mode %d Wake Time" % (i+1), wake)
+ wf.set_apply_callback(apply_wake, sm)
+ cf.append(wf)
+
+ slp = RadioSettingValueInteger(0, 18000, sm.sleep * 10, 1)
+ wf = RadioSetting("save[%i].sleep" % i,
+ "Save Mode %d Sleep Time" % (i+1), slp)
+ wf.set_apply_callback(apply_sleep, sm)
+ cf.append(wf)
+
+ _msg = str(self._memobj.display.banner).split("\0")[0]
+ val = RadioSettingValueString(0, 16, _msg)
+ val.set_mutable(True)
+ cf.append(RadioSetting("display.banner",
+ "Display Message", val))
+ return cf
+
+ def _fm_tab(self):
+ """FM Broadcast channels
+ """
+ def apply_fm(setting, obj):
+ f = freq2short(setting.value, 76000000, 108000000)
+ obj.fm_freq = f
+
+ fm = RadioSettingGroup("fm_chans", "FM Broadcast")
+ for ch in range(0, 20):
+ chan = self._memobj.fm_chans[ch]
+ freq = RadioSettingValueString(0, 20,
+ short2freq(chan.fm_freq))
+ rs = RadioSetting("fm_%d" % (ch + 1),
+ "FM Channel %d" % (ch + 1), freq)
+ rs.set_apply_callback(apply_fm, chan)
+ fm.append(rs)
+ return fm
+
+ def _scan_grp(self):
+ """Scan groups
+ """
+ def apply_name(setting, obj):
+ name = str2name(setting.value, 8, '\0', '\0')
+ obj.name = name
+
+ def apply_start(setting, obj):
+ """Do a callback to deal with RadioSettingInteger limitation
+ on memory address resolution
+ """
+ obj.scan_st = int(setting.value)
+
+ def apply_end(setting, obj):
+ """Do a callback to deal with RadioSettingInteger limitation
+ on memory address resolution
+ """
+ obj.scan_end = int(setting.value)
+
+ sgrp = self._memobj.scn_grps
+ scan = RadioSettingGroup("scn_grps", "Channel Scanner Groups")
+ for i in range(0, 10):
+ s_grp = sgrp.addrs[i]
+ s_name = sgrp.names[i]
+ rs_name = RadioSettingValueString(0, 8,
+ name2str(s_name.name))
+ rs = RadioSetting("scn_grps.names[%i].name" % i,
+ "Group %i Name" % (i + 1), rs_name)
+ rs.set_apply_callback(apply_name, s_name)
+ scan.append(rs)
+ rs_st = RadioSettingValueInteger(1, 999, s_grp.scan_st)
+ rs = RadioSetting("scn_grps.addrs[%i].scan_st" % i,
+ "Starting Channel", rs_st)
+ rs.set_apply_callback(apply_start, s_grp)
+ scan.append(rs)
+ rs_end = RadioSettingValueInteger(1, 999, s_grp.scan_end)
+ rs = RadioSetting("scn_grps.addrs[%i].scan_end" % i,
+ "Last Channel", rs_end)
+ rs.set_apply_callback(apply_end, s_grp)
+ scan.append(rs)
+ return scan
+
+ def _callid_grp(self):
+ """Caller IDs to be recognized by radio
+ This really should be a table in the UI
+ """
+ def apply_callid(setting, obj):
+ c = str2callid(setting.value)
+ obj.cid = c
+
+ def apply_name(setting, obj):
+ name = str2name(setting.value, 6, '\0', '\xff')
+ obj.name = name
+
+ cid = RadioSettingGroup("callids", "Caller IDs")
+ for i in range(0, 20):
+ callid = self._memobj.call_ids[i]
+ name = self._memobj.cid_names[i]
+ c_name = RadioSettingValueString(0, 6, name2str(name.name))
+ rs = RadioSetting("cid_names[%i].name" % i,
+ "Caller ID %i Name" % (i + 1), c_name)
+ rs.set_apply_callback(apply_name, name)
+ cid.append(rs)
+ c_id = RadioSettingValueString(0, 6,
+ callid2str(callid.cid),
+ False)
+ rs = RadioSetting("call_ids[%i].cid" % i,
+ "Caller ID Code", c_id)
+ rs.set_apply_callback(apply_callid, callid)
+ cid.append(rs)
+ return cid
+
+ def _band_tab(self, area, band):
+ """ Build a band tab inside a VFO/Area
+ """
+ def apply_freq(setting, lo, hi, obj):
+ f = freq2int(setting.value, lo, hi)
+ obj.freq = f/10
+
+ def apply_offset(setting, obj):
+ f = freq2int(setting.value, 0, 5000000)
+ obj.offset = f/10
+
+ def apply_enc(setting, obj):
+ t = tone2short(setting.value)
+ obj.encqt = t
+
+ def apply_dec(setting, obj):
+ t = tone2short(setting.value)
+ obj.decqt = t
+
+ if area == "a":
+ if band == 150:
+ c = self._memobj.vfo_a.band_150
+ lo = 108000000
+ hi = 180000000
+ elif band == 200:
+ c = self._memobj.vfo_a.band_200
+ lo = 230000000
+ hi = 250000000
+ elif band == 300:
+ c = self._memobj.vfo_a.band_300
+ lo = 350000000
+ hi = 400000000
+ elif band == 450:
+ c = self._memobj.vfo_a.band_450
+ lo = 400000000
+ hi = 512000000
+ else: # 700
+ c = self._memobj.vfo_a.band_700
+ lo = 700000000
+ hi = 985000000
+ else: # area 'b'
+ if band == 150:
+ c = self._memobj.vfo_b.band_150
+ lo = 136000000
+ hi = 180000000
+ else: # 450
+ c = self._memobj.vfo_b.band_450
+ lo = 400000000
+ hi = 512000000
+
+ prefix = "vfo_%s.band_%d" % (area, band)
+ bf = RadioSettingGroup(prefix, "%dMHz Band" % band)
+ freq = RadioSettingValueString(0, 15, int2freq(c.freq * 10))
+ rs = RadioSetting(prefix + ".freq", "Rx Frequency", freq)
+ rs.set_apply_callback(apply_freq, lo, hi, c)
+ bf.append(rs)
+
+ off = RadioSettingValueString(0, 15, int2freq(c.offset * 10))
+ rs = RadioSetting(prefix + ".offset", "Tx Offset(28)", off)
+ rs.set_apply_callback(apply_offset, c)
+ bf.append(rs)
+
+ rs = RadioSetting(prefix + ".encqt",
+ "Encode QT(17,19)",
+ RadioSettingValueList(TONE_LIST,
+ short2tone(c.encqt)))
+ rs.set_apply_callback(apply_enc, c)
+ bf.append(rs)
+
+ rs = RadioSetting(prefix + ".decqt",
+ "Decode QT(16,18)",
+ RadioSettingValueList(TONE_LIST,
+ short2tone(c.decqt)))
+ rs.set_apply_callback(apply_dec, c)
+ bf.append(rs)
+
+ bf.append(RadioSetting(prefix + ".qt",
+ "Mute Mode(21)",
+ RadioSettingValueList(SPMUTE_LIST,
+ SPMUTE_LIST[c.qt])))
+ bf.append(RadioSetting(prefix + ".scan",
+ "Scan this(48)",
+ RadioSettingValueBoolean(c.scan)))
+ bf.append(RadioSetting(prefix + ".pwr",
+ "Power(5)",
+ RadioSettingValueList(
+ POWER_LIST, POWER_LIST[c.pwr])))
+ bf.append(RadioSetting(prefix + ".mod",
+ "AM Modulation(54)",
+ RadioSettingValueBoolean(c.mod)))
+ bf.append(RadioSetting(prefix + ".fm_dev",
+ "FM Deviation(4)",
+ RadioSettingValueList(
+ BANDWIDTH_LIST,
+ BANDWIDTH_LIST[c.fm_dev])))
+ bf.append(
+ RadioSetting(prefix + ".shift",
+ "Frequency Shift(6)",
+ RadioSettingValueList(OFFSET_LIST,
+ OFFSET_LIST[c.shift])))
+ return bf
+
+ def _area_tab(self, area):
+ """Build a VFO tab
+ """
+ def apply_scan_st(setting, scan_lo, scan_hi, obj):
+ f = freq2short(setting.value, scan_lo, scan_hi)
+ obj.scan_st = f
+
+ def apply_scan_end(setting, scan_lo, scan_hi, obj):
+ f = freq2short(setting.value, scan_lo, scan_hi)
+ obj.scan_end = f
+
+ if area == "a":
+ desc = "Area A Settings"
+ c = self._memobj.a_conf
+ scan_lo = 108000000
+ scan_hi = 985000000
+ scan_rng = self._memobj.settings.a
+ band_list = (150, 200, 300, 450, 700)
+ else:
+ desc = "Area B Settings"
+ c = self._memobj.b_conf
+ scan_lo = 136000000
+ scan_hi = 512000000
+ scan_rng = self._memobj.settings.b
+ band_list = (150, 450)
+
+ prefix = "%s_conf" % area
+ af = RadioSettingGroup(prefix, desc)
+ af.append(
+ RadioSetting(prefix + ".w_mode",
+ "Workmode",
+ RadioSettingValueList(
+ WORKMODE_LIST,
+ WORKMODE_LIST[c.w_mode])))
+ af.append(RadioSetting(prefix + ".w_chan",
+ "Channel",
+ RadioSettingValueInteger(1, 999,
+ c.w_chan)))
+ af.append(
+ RadioSetting(prefix + ".scan_grp",
+ "Scan Group(49)",
+ RadioSettingValueList(
+ SCANGRP_LIST,
+ SCANGRP_LIST[c.scan_grp])))
+ af.append(RadioSetting(prefix + ".bcl",
+ "Busy Channel Lock-out(15)",
+ RadioSettingValueBoolean(c.bcl)))
+ af.append(
+ RadioSetting(prefix + ".sql",
+ "Squelch Level(8)",
+ RadioSettingValueList(LIST_0_9,
+ LIST_0_9[c.sql])))
+ af.append(
+ RadioSetting(prefix + ".cset",
+ "Call ID Group(52)",
+ RadioSettingValueList(LIST_1_20,
+ LIST_1_20[c.cset])))
+ af.append(
+ RadioSetting(prefix + ".step",
+ "Frequency Step(3)",
+ RadioSettingValueList(
+ STEP_LIST, STEP_LIST[c.step])))
+ af.append(
+ RadioSetting(prefix + ".scan_mode",
+ "Scan Mode(20)",
+ RadioSettingValueList(
+ SCANMODE_LIST,
+ SCANMODE_LIST[c.scan_mode])))
+ af.append(
+ RadioSetting(prefix + ".scan_range",
+ "Scan Range(50)",
+ RadioSettingValueList(
+ SCANRANGE_LIST,
+ SCANRANGE_LIST[c.scan_range])))
+ st = RadioSettingValueString(0, 15,
+ short2freq(scan_rng.scan_st))
+ rs = RadioSetting("settings.%s.scan_st" % area,
+ "Frequency Scan Start", st)
+ rs.set_apply_callback(apply_scan_st, scan_lo, scan_hi, scan_rng)
+ af.append(rs)
+
+ end = RadioSettingValueString(0, 15,
+ short2freq(scan_rng.scan_end))
+ rs = RadioSetting("settings.%s.scan_end" % area,
+ "Frequency Scan End", end)
+ rs.set_apply_callback(apply_scan_end, scan_lo, scan_hi,
+ scan_rng)
+ af.append(rs)
+ # Each area has its own set of bands
+ for band in (band_list):
+ af.append(self._band_tab(area, band))
+ return af
+
+ def _key_tab(self):
+ """Build radio key/button menu
+ """
+ s = self._memobj.settings
+ kf = RadioSettingGroup("key_grp", "Key Settings")
+
+ kf.append(RadioSetting("settings.pf1",
+ "PF1 Key function(55)",
+ RadioSettingValueList(
+ PF1KEY_LIST,
+ PF1KEY_LIST[s.pf1])))
+ kf.append(RadioSetting("settings.pf2",
+ "PF2 Key function(56)",
+ RadioSettingValueList(
+ PF2KEY_LIST,
+ PF2KEY_LIST[s.pf2])))
+ kf.append(RadioSetting("settings.pf3",
+ "PF3 Key function(57)",
+ RadioSettingValueList(
+ PF3KEY_LIST,
+ PF3KEY_LIST[s.pf3])))
+ return kf
+
+ def _get_settings(self):
+ """Build the radio configuration settings menus
+ """
+
+ core_grp = self._core_tab()
+ fm_grp = self._fm_tab()
+ area_a_grp = self._area_tab("a")
+ area_b_grp = self._area_tab("b")
+ key_grp = self._key_tab()
+ scan_grp = self._scan_grp()
+ callid_grp = self._callid_grp()
+ admin_grp = self._admin_tab()
+ rpt_grp = self._repeater_tab()
+
+ core_grp.append(key_grp)
+ core_grp.append(admin_grp)
+ core_grp.append(rpt_grp)
+ group = RadioSettings(core_grp,
+ area_a_grp,
+ area_b_grp,
+ fm_grp,
+ scan_grp,
+ callid_grp
+ )
+ return group
+
+ def get_settings(self):
+ """ Public build out linkage between radio settings and UI
+ """
+ try:
+ return self._get_settings()
+ except Exception:
+ import traceback
+ LOG.error("Failed to parse settings: %s",
+ traceback.format_exc())
+ return None
+
+ def _is_freq(self, element):
+ """This is a hack to smoke out whether we need to do
+ frequency translations for otherwise innocent u16s and u32s
+ """
+ return "rxfreq" in element.get_name() or \
+ "txfreq" in element.get_name() or \
+ "scan_st" in element.get_name() or \
+ "scan_end" in element.get_name() or \
+ "offset" in element.get_name() or \
+ "fm_stop" in element.get_name()
+
+ def set_settings(self, settings):
+ """ Public update radio settings via UI callback
+ A lot of this should be in common code....
+ """
+
+ for element in settings:
+ if not isinstance(element, RadioSetting):
+ LOG.debug("set_settings: not instance %s" %
+ element.get_name())
+ self.set_settings(element)
+ continue
+ else:
+ try:
+ if "." in element.get_name():
+ bits = element.get_name().split(".")
+ obj = self._memobj
+ for bit in bits[:-1]:
+ # decode an array index
+ if "[" in bit and "]" in bit:
+ bit, index = bit.split("[", 1)
+ index, junk = index.split("]", 1)
+ index = int(index)
+ obj = getattr(obj, bit)[index]
+ else:
+ obj = getattr(obj, bit)
+ setting = bits[-1]
+ else:
+ obj = self._memobj.settings
+ setting = element.get_name()
+
+ if element.has_apply_callback():
+ LOG.debug("Using apply callback")
+ element.run_apply_callback()
+ else:
+ LOG.debug("Setting %s = %s" %
+ (setting, element.value))
+ if self._is_freq(element):
+ setattr(obj, setting, int(element.value)/10)
+ else:
+ setattr(obj, setting, element.value)
+ except Exception, e:
+ LOG.debug("set_settings: Exception with %s" %
+ element.get_name())
+ raise
--
Jim Lieb
Mobile: 831-295-9317
GPG Key: 79BB52C7BD0530F5
"If ease of use was the only requirement, we would all be riding tricycles"
- Douglas Engelbart 1925–2013
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20181205/c0dcf555/attachment-0001.html
More information about the chirp_devel
mailing list